คู่มือการใช้งานปั๊มน้ำแบบคันโยกสำหรับงานหนัก รุ่น TP66 ของ Sealey

สินค้าเกินview

The Sealey TP66 is a self-priming lever pump designed for efficient fluid transfer. It features an anti-drip nozzle, a 2-inch BSP connector, and a dip-tube suitable for 100 or 205-liter drums. This pump is ideal for handling oils, antifreeze, paraffin, and other non-corrosive fluids. Each stroke discharges approximately 330ml of fluid.

Image: The Sealey TP66 pump, showing its red body, black handle, and nozzle. The Sealey Power Products logo is visible on the side.

คำแนะนำเพื่อความปลอดภัย

Always observe the following safety precautions when using the Sealey TP66 pump:

• อ่านและทำความเข้าใจคำแนะนำทั้งหมดก่อนใช้งาน
• Wear appropriate personal protective equipment (PPE), such as gloves and eye protection, when handling fluids.
• Ensure the pump is securely fitted to the drum before use to prevent spills.
• Do not use the pump with corrosive, flammable, or highly volatile liquids unless specifically stated as compatible.
• Keep the work area clean and well-ventilated.
• Store the pump in a clean, dry place away from direct sunlight and extreme temperatures.

การตั้งค่า

1. แกะส่วนประกอบ: Carefully remove all components from the packaging. Verify that all parts are present: the pump body, lever handle, dip-tube, and anti-drip nozzle.
2. Assemble Dip-Tube: Insert the dip-tube into the bottom of the pump body. Ensure it is securely fastened. For 100 or 205-liter drums, the standard dip-tube should be sufficient. An optional 1200mm dip-tube (Model No. TP66/ACC) is available for deeper drums.
3. Attach Anti-Drip Nozzle: Screw the anti-drip nozzle onto the outlet spout of the pump. Hand-tighten to ensure a snug fit.
4. Mount to Drum: Insert the assembled pump and dip-tube into the 2-inch BSP opening of the fluid drum. Rotate the pump body until the 2-inch BSP connector is firmly seated and secured to the drum opening.
5. Prepare for Priming: Position a suitable receiving container under the anti-drip nozzle.

คำแนะนำการใช้งาน

Follow these steps for effective fluid transfer:

1. การเตรียมปั๊ม: Before the first use or after the pump has been dry, operate the lever handle several times in full strokes. This action will draw fluid up the dip-tube and into the pump mechanism, initiating the self-priming process. Continue until fluid begins to flow consistently from the nozzle.
2. Fluid Transfer: Once primed, operate the lever handle with smooth, full strokes. Each full stroke will discharge approximately 330ml of fluid. Maintain a steady rhythm for continuous flow.
3. Monitoring Fluid Level: Periodically check the fluid level in the source drum to avoid running the pump dry, which can reduce efficiency and potentially damage the pump.
4. Stopping Transfer: To stop the fluid transfer, cease operating the lever handle. The anti-drip nozzle is designed to minimize drips after pumping stops.
5. หลังการผ่าตัด: After use, if transferring different fluids or for long-term storage, consider flushing the pump with a compatible cleaning agent or the next fluid to be transferred.

การซ่อมบำรุง

Regular maintenance ensures the longevity and optimal performance of your Sealey TP66 pump:

• การทำความสะอาด: After each use, especially when transferring different types of fluids, it is recommended to flush the pump with a small amount of the new fluid or a compatible cleaning solution to prevent cross-contamination and residue buildup.
• การตรวจสอบ: Periodically inspect the dip-tube, nozzle, and pump body for any signs of wear, cracks, or damage. Ensure all connections are tight and secure.
• การหล่อลื่น: While the pump is designed for low maintenance, occasional lubrication of the lever mechanism pivot points with a suitable lubricant can ensure smooth operation.
• พื้นที่จัดเก็บ: When not in use, store the pump in a clean, dry environment, preferably indoors, to protect it from dust, dirt, and extreme temperatures. If storing for extended periods, ensure the pump is clean and dry.

การแก้ไขปัญหา

ข้อมูลจำเพาะ

การรับประกันและการสนับสนุน

Specific warranty details for the Sealey TP66 pump are not provided in this manual. For warranty information, technical support, or to inquire about replacement parts, please refer to the official Sealey website or contact Sealey customer service directly. Keep your purchase receipt as proof of purchase.

หากต้องการความช่วยเหลือเพิ่มเติม คุณสามารถไปที่ Sealey official webเว็บไซต์ or contact their authorized distributors.