Samson SP01 Spider Mount Instruction Manual

1. บทนำ

The Samson SP01 Spider Mount is a high-quality shock mount designed to enhance audio recording by isolating microphones from unwanted vibrations. This manual provides essential information for the proper setup, operation, and maintenance of your SP01 Spider Mount.

2. คุณสมบัติหลัก

• การแยกการสั่นสะเทือน: Designed to isolate the microphone from physical vibrations, floor noise, and stand noise, contributing to clearer audio recordings.
• โครงสร้างแข็งแรงทนทาน: Constructed from metal for durability and reliable support.
• ความเข้ากันได้เฉพาะ: Engineered for seamless integration with designated Samson condenser microphones.

3. Compatible Microphones

The Samson SP01 Spider Mount is compatible with the following Samson condenser microphones:

• แซมสัน C01
• แซมสัน C03
• Samson CL7
• Samson CL8
• แซมซั่น C01U

For optimal performance, ensure your microphone model is listed above.

4. การตั้งค่าและการติดตั้ง

Follow these steps to properly attach your Samson SP01 Spider Mount to a microphone stand and install your compatible microphone.

4.1 Attaching to a Microphone Stand

1. Identify the threaded adapter on your microphone stand. The SP01 mount typically uses a standard thread size.
2. Screw the base of the SP01 Spider Mount onto the microphone stand until it is securely fastened. Ensure it is tight enough to prevent wobbling but do not overtighten.

Image: The Samson SP01 Spider Mount shown attached to a microphone stand, illustrating its typical setup.

4.2 การติดตั้งไมโครโฟน

1. Gently open the spring-loaded clamps of the Spider Mount.
2. Carefully insert your compatible Samson condenser microphone into the mount, ensuring it is centered and held firmly by the elastic bands.
3. ปล่อย clamps, allowing the elastic bands to securely cradle the microphone. The elastic suspension system is crucial for isolating vibrations.

ภาพ: ภาพระยะใกล้ view of a microphone being carefully placed into the elastic suspension of the Samson SP01 Spider Mount.

5. การใช้งานและการปรับแต่ง

The Samson SP01 Spider Mount allows for flexible positioning of your microphone.

• การปรับมุม: Use the knob on the side of the mount to loosen, adjust the microphone to your desired angle, and then tighten to secure its position.
• ระบบลดแรงสั่นสะเทือน: The primary function of the Spider Mount is to reduce unwanted vibrations transmitted through the microphone stand. Ensure the elastic bands are intact and properly tensioned for effective isolation.

6. การบำรุงรักษา

To ensure the longevity and optimal performance of your Samson SP01 Spider Mount, follow these maintenance guidelines:

• การทำความสะอาด: Wipe the metal frame with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive materials.
• ยางยืด: Periodically inspect the elastic bands for signs of wear, stretching, or breakage. Worn bands may reduce the mount's effectiveness in isolating vibrations. Replacement bands can be sourced from authorized Samson dealers.
• พื้นที่จัดเก็บ: When not in use, store the mount in a clean, dry environment to prevent damage.

7 การแก้ไขปัญหา

If you experience issues with your Samson SP01 Spider Mount, consider the following:

• Excessive Vibration Noise:
  • Ensure the microphone is correctly seated within the elastic bands.
  • Check if the elastic bands are worn or broken and replace them if necessary.
  • Verify that the mount is securely tightened to the microphone stand.
• Microphone Slipping:
  • Confirm that your microphone is one of the compatible models.
  • Ensure the elastic bands are providing adequate tension.

8. ข้อมูลจำเพาะ

9. การรับประกันและการสนับสนุน

For warranty information and technical support, please refer to the official Samson Technologies webหรือติดต่อฝ่ายบริการลูกค้า เก็บหลักฐานการซื้อไว้เพื่อใช้ในกรณีที่ต้องการเคลมประกัน

สำหรับทรัพยากรเพิ่มเติมและข้อมูลผลิตภัณฑ์ โปรดไปที่ SAMSON Store on Amazon.