BESSEY MMS-8, 8 In., All Steel Clamp คู่มือการใช้งาน

1. สินค้าหมดview

The BESSEY MMS-8 is an 8-inch all-steel clamp designed for robust and reliable workholding. Known for its durability and precision, this clamp is a versatile tool suitable for various applications in woodworking, metalworking, and general shop use. Its unique construction from a single piece of cold-drawn steel ensures exceptional strength and longevity.

รูปที่ 1 : ด้านหน้า view of the BESSEY MMS-8 All Steel Clamp, แสดงasing its robust design and galvanized finish.

คุณสมบัติหลัก:

• All-Steel Construction: Clamp rail and fixed jaw are crafted from a single piece of BESSEY cold-drawn steel, ensuring superior strength and rigidity.
• Heat-Treated Rail: After bending and forming, the rails are heat-treated for maximum strength and resistance to deformation.
• Electro-Galvanized Sliding Arm: The drop-forged, electro-galvanized steel sliding arm provides smooth operation and corrosion resistance.
• Standard Swivel Pressure Pads: Equipped with durable swivel pressure pads for secure and even clamping force distribution.
• Steel Sliding T-Bar Handle: Ergonomically designed T-bar handle allows for comfortable and efficient tightening.
• Cl สูงampแรงดัน: Capable of generating up to 660 lbs of clamping force, making it significantly stronger and faster than traditional C-clamps.

รูปที่ 2: ด้านข้าง view of the BESSEY MMS-8 clamp, highlighting the sliding arm and screw mechanism.

2. การตั้งค่า

The BESSEY MMS-8 clamp is designed for immediate use with minimal setup. Before first use, inspect the clamp for any signs of shipping damage. Ensure all components, including the fixed jaw, sliding arm, screw, and handle, are securely in place and operate smoothly.

• การแกะกล่อง: นำ cl . ออกอย่างระมัดระวังamp จากบรรจุภัณฑ์
• การตรวจสอบเบื้องต้น: Check for any loose parts or visible damage.
• ทำความคุ้นเคย: Operate the sliding arm and screw mechanism a few times to understand its movement and ensure smooth action.

3. คู่มือการใช้งาน

Using the BESSEY MMS-8 clamp is straightforward. Always ensure the workpiece is stable and properly supported before applying clampแรงกดดัน

รูปที่ 3: ระยะใกล้ view of the screw mechanism and swivel pad, demonstrating the precision engineering.

1. Positioning the Sliding Arm: Loosen the T-bar handle slightly. Slide the movable jaw along the rail until it is close to your workpiece.
2. การยึดชิ้นงานให้แน่น: วาง clamp over the workpiece, ensuring both the fixed jaw and the swivel pressure pad are in full contact with the surfaces to be clampบก.
3. การใช้แรงกด: Turn the T-bar handle clockwise to tighten the screw and apply clamping pressure. Apply only enough pressure to securely hold the workpiece without causing damage. The precision of the screw allows for fine adjustments.
4. เรเลasing เดอะ Clamp: Turn the T-bar handle counter-clockwise to release the pressure, then slide the movable jaw away from the workpiece.

บันทึก: For delicate surfaces, consider using protective pads between the clamp jaws and the workpiece to prevent marring.

4. การบำรุงรักษา

Regular maintenance will ensure the longevity and optimal performance of your BESSEY MMS-8 clamp.

• การทำความสะอาด: After each use, wipe down the clamp with a clean, dry cloth to remove any dust, debris, or moisture.
• การหล่อลื่น: Periodically apply a light coat of machine oil to the screw threads and the sliding mechanism to ensure smooth operation and prevent rust.
• พื้นที่จัดเก็บ: เก็บ clamp ในสภาพแวดล้อมที่แห้งเพื่อป้องกันการกัดกร่อน
• การตรวจสอบ: ตรวจสอบ cl อย่างสม่ำเสมอamp for any signs of wear, damage, or bending. Do not use a damaged clamp.

5 การแก้ไขปัญหา

Most issues with the BESSEY MMS-8 clamp can be resolved with simple checks.

• Clamp not holding securely: Ensure the workpiece is clean and free of oils or debris. Verify that the swivel pressure pads are making full contact. Apply adequate, but not excessive, pressure.
• Screw mechanism stiff or difficult to turn: The screw threads may be dirty or require lubrication. Clean the threads thoroughly and apply a suitable lubricant.
• Sliding arm sticking: The rail may be dirty or require lubrication. Clean the rail and apply a light lubricant. Ensure no debris is lodged in the sliding mechanism.

6. ข้อมูลจำเพาะ

Figure 4: BESSEY MMS-8 clamp with its product tag, showing key specifications.

รูปที่ 5: ย้อนกลับ view of the BESSEY MMS-8 clamp, showing the barcode and manufacturing details.

7. การรับประกันและการสนับสนุน

BESSEY products are manufactured to high standards of quality and durability. For specific warranty information, please refer to the warranty card included with your product or visit the official BESSEY website. If you encounter any issues or require technical assistance, please contact BESSEY customer support through their official channels.

For further information and product registration, please visit: www.bessey.com