คู่มือการใช้งานเรือดับเพลิง Robbe Duesseldorf รุ่น 1-1100

1. บทนำ

Welcome to the instruction manual for your Robbe Duesseldorf Fire-Fighting Boat Model 1-1100. This manual provides essential information for the safe assembly, operation, and maintenance of your model. Please read these instructions thoroughly before beginning assembly or operation to ensure proper function and longevity of your model.

2. ข้อมูลด้านความปลอดภัย

Operating a model boat requires attention to safety. Please observe the following guidelines:

• การดูแลผู้ใหญ่: This model is not a toy. Adult supervision is recommended, especially during assembly and operation by minors.
• ความปลอดภัยทางน้ำ: Operate the model in safe, open water areas away from swimmers, wildlife, and other watercraft. Avoid strong currents or deep water where retrieval may be difficult.
• ส่วนประกอบไฟฟ้า: Ensure all electrical connections are secure and waterproofed as instructed. Keep batteries and electronic components dry.
• ชิ้นส่วนที่เคลื่อนไหว: Keep fingers and loose clothing away from propellers and other moving parts during operation.
• การจัดการแบตเตอรี่: Use only recommended batteries and chargers. Follow battery manufacturer's instructions for charging, discharging, and storage to prevent fire or injury.
• ข้อควรพิจารณาด้านสิ่งแวดล้อม: Do not dispose of batteries or electronic components in household waste. Follow local regulations for recycling.

3. เนื้อหาบรรจุภัณฑ์

Upon opening the package, verify that all components are present and undamaged. The Robbe Duesseldorf Fire-Fighting Boat Model 1-1100 typically includes:

• Boat hull and superstructure components
• Propulsion system (motor, propeller, shaft)
• Steering mechanism (rudder, servo)
• Water cannon system components
• Deck fittings and detailing parts
• Assembly hardware (screws, nuts, adhesives)
• Instruction manual and decals
• ส่วนประกอบขาตั้งแสดงสินค้า

Note: Radio control equipment, batteries, and charger are typically sold separately unless specified otherwise.

4. การประกอบและการติดตั้ง

Follow the detailed assembly diagrams and instructions provided in the kit. Ensure all parts are correctly oriented and securely fastened.

1. การประกอบตัวเรือ: Begin by assembling the main hull structure, ensuring all seams are watertight if required.
2. Propulsion System Installation: Install the motor, propeller shaft, and rudder according to the diagrams. Ensure smooth operation of the propeller and rudder.
3. Superstructure and Deck Fittings: Attach the cabin, deck, and all detailed fittings. Pay attention to the placement of the water cannons and other accessories.
4. การติดตั้งอุปกรณ์อิเล็กทรอนิกส์: Install the receiver, speed controller, steering servo, and any other electronic components. Connect them as per the wiring diagram. Ensure proper waterproofing for all sensitive electronics.
5. ตำแหน่งแบตเตอรี่: Secure the battery in the designated compartment, ensuring it is balanced for optimal performance.
6. Radio Control Setup: Pair your radio transmitter with the receiver. Calibrate the steering and throttle controls.
7. Pre-Launch Checks: Before placing the model in water, perform a dry run to ensure all functions (motor, steering, water cannons) operate correctly.

Figure 4.1: The Robbe Duesseldorf Fire-Fighting Boat Model 1-1100 displayed on its stand, showcasing the completed assembly.

5. คู่มือการใช้งาน

Once assembled and checked, your Robbe Duesseldorf Fire-Fighting Boat is ready for operation.

1. เปิดลำดับ: Always turn on your radio transmitter first, then the boat's receiver.
2. เปิดตัว: Gently place the boat into the water. Ensure it floats level and no water ingress occurs.
3. Basic Maneuvers:
   • ไปข้างหน้า/ย้อนกลับ: Use the throttle stick on your transmitter.
   • การบังคับเลี้ยว: Use the steering wheel/stick to turn the rudder left or right.
4. Water Cannon Operation: If equipped with functional water cannons, activate them via the designated channel on your transmitter. Ensure the water intake is clear.
5. Returning to Shore: Operate the boat back to a safe retrieval point before the battery is fully depleted.
6. ลำดับการปิด: Always turn off the boat's receiver first, then the radio transmitter.

Figure 5.1: The Robbe Duesseldorf Fire-Fighting Boat Model 1-1100 navigating through water, demonstrating its operational capabilities.

รูปที่ 5.2: รายละเอียด view of the functional water cannon system, ready for activation during operation.

6. การบำรุงรักษา

Regular maintenance ensures the longevity and optimal performance of your model boat.

• การทำความสะอาด: After each use, thoroughly clean the hull and deck with fresh water to remove any salt, dirt, or debris. Dry completely.
• การอบแห้ง: Open all compartments and allow the interior to air dry completely to prevent mold or corrosion.
• Propeller and Rudder: Check for any entanglement (e.g., weeds, fishing line) and ensure free movement. Lubricate the propeller shaft as recommended by the kit instructions.
• การดูแลแบตเตอรี่ Store batteries in a cool, dry place at their recommended storage voltage. Do not leave batteries fully charged or fully discharged for extended periods.
• Electronic Checks: Periodically inspect all wiring and connections for corrosion or damage.
• พื้นที่จัดเก็บ: Store the model in a dry, temperature-controlled environment, preferably on its display stand, away from direct sunlight.

7 การแก้ไขปัญหา

If you encounter issues with your model, refer to the following common problems and solutions:

8. ข้อมูลจำเพาะ

9. การรับประกันและการสนับสนุน

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official Robbe webไซต์ เก็บหลักฐานการซื้อของคุณไว้เพื่อใช้ในกรณีเรียกร้องการรับประกัน

If you require further assistance, please contact Robbe customer service through their official channels.