WEST BIKING Solar Powered Wireless Bicycle Computer User Manual

1. บทนำ

Thank you for choosing the WEST BIKING Solar Powered Wireless Bicycle Computer. This device is designed to provide accurate cycling data, including speed, distance, riding time, and more, with the convenience of wireless operation and solar charging capabilities. Its waterproof design ensures reliable performance in various weather conditions.

2. เนื้อหาบรรจุภัณฑ์

กรุณาตรวจสอบแพ็คเกจเพื่อให้แน่ใจว่ามีสินค้าครบทั้งหมด:

• Head device (Bicycle Computer)
• เซ็นเซอร์ไร้สาย
• Bracket (for handlebar installation)
• Speed Magnet
• 2 x Rubber Slices
• 4 x Plastic Straps (Zip ties)
• โอริง 1 ชิ้น
• Batteries (2 x CR2302 button batteries)
• คู่มือการใช้งาน

3. ข้อมูลจำเพาะ

4. คู่มือการติดตั้ง

Follow these steps to correctly install your bicycle computer:

1. Attach the Base to the Handlebars: Secure the computer's mounting base to your bicycle's handlebars using the provided plastic straps or O-ring.
2. Fix the Monitor to the Base: Slide the bicycle computer head unit onto the installed base until it clicks securely into place.
3. Attach the Wireless Sensor: Use the plastic straps to attach the wireless sensor to the front fork of your bicycle. Ensure it is positioned correctly to align with the wheel magnet.
4. Attach the Speed Magnet: Loosely attach the speed magnet to a spoke on your front wheel.
5. ปรับระยะห่าง:
   • Adjust the distance between the magnet and the sensor to be within 3 mm (ideally less than 1.5 mm).
   • Ensure the distance between the wireless sensor and the bicycle computer is less than 60 cm.
6. ส่วนประกอบที่ปลอดภัย: Once distances are correct, tighten the plastic straps for the sensor and magnet. Trim any excess strap material.

5. การตั้งค่าและกำหนดค่าเบื้องต้น

After installation, you need to configure the computer for accurate readings.

5.1. การเปิดใช้งานแบตเตอรี่

Before first use, ensure you remove any insulation sheets from the batteries in both the computer head unit and the wireless sensor. The computer uses 2 x CR2302 button batteries.

5.2. Wheel Circumference Setting

Accurate speed and distance readings depend on correctly setting your wheel's circumference. Refer to your bicycle's tire specifications or measure it manually.

5.3. การเลือกภาษา

The computer supports five languages: English, Deutsch, French, Dutch, and Espanol. Follow the on-screen prompts during initial setup or consult the full manual for specific button combinations to change the language.

5.4. KM/H or MPH Switch

You can switch between kilometers per hour (KM/H) and miles per hour (MPH) based on your preference. This setting is usually part of the initial setup or accessible through the settings menu.

5.5. Bike A/B Selection

If you use the computer on two different bicycles, you can configure settings for each. Press the [SET] button for two seconds to select between Bike A or Bike B modes.

6. คู่มือการใช้งาน

The bicycle computer features two main buttons: [MODE] and [SET].

6.1. Function Display Cycle

Press the [MODE] button to cycle through various functions:

• CLOCK (Current Time)
• ODO (Total Odometer)
• DST (Trip Distance)
• MXS (Maximum Speed)
• AVS (Average Speed)
• TM (Riding Time)
• TEM (Temperature)
• CAL (Calories Burned)
• SCAN (Cycles through functions automatically)

6.2. การทำงานของไฟแบ็คไลท์

The computer features a green backlight for night visibility.

• Short Light Mode: Each time a button is pressed, the backlight illuminates for 3 seconds.
• Long Light Mode: Press and hold both the left and right buttons simultaneously to keep the backlight on continuously.

To toggle the backlight mode (LIGHT ON/LIGHT OFF), hold [SET] + [MODE] buttons simultaneously. When in LIGHT ON mode, pressing any key will activate the backlight for 6 seconds. When in LIGHT OFF mode, the backlight will remain off.

7. การจัดการพลังงาน

7.1. Solar Energy

The integrated solar panel provides emergency charging and extends the life of the internal batteries by converting sunlight into electricity. However, the primary power source remains the button batteries, especially in low light conditions.

7.2. Automatic Wake-up and Power Saving Mode

The computer features an automatic stop-start function. It will enter a sleep mode with only the clock displayed after 4 minutes of inactivity. Once the wheel moves, the computer automatically wakes up and resumes tracking data.

7.3. Low Power Indicator

A low power indicator will alert you when the batteries need to be changed. Your data will not be lost during battery replacement.

8. การบำรุงรักษา

• การทำความสะอาด: Wipe the computer with a soft, damp ผ้า ห้ามใช้สารทำความสะอาดที่มีฤทธิ์กัดกร่อนหรือตัวทำละลาย
• การสัมผัสน้ำ: The device is daily waterproof. Avoid submerging it in water or exposing it to heavy rain for prolonged periods.
• การเปลี่ยนแบตเตอรี่: When the low power indicator appears, replace the CR2302 button batteries. Use a coin to unscrew the back cover for access.

9 การแก้ไขปัญหา

• No Speed/Distance Reading:
  • Check the distance between the speed magnet and the wireless sensor. It must be less than 3 mm.
  • Ensure the wireless sensor is within 60 cm of the computer head unit.
  • Verify that the batteries in both the computer and sensor are correctly installed and have sufficient charge.
• จอแสดงผลไม่ทำงาน:
  • ตรวจสอบระดับแบตเตอรี่
  • If the computer is in power-saving mode (only clock displayed), move the wheel to wake it up.
• Data Resetting Unexpectedly:
  • Removing the battery will reset all data except the total odometer (ODO).
  • ตรวจสอบให้แน่ใจว่าแบตเตอรี่อยู่ในตำแหน่งที่ปลอดภัย
• Difficulty Resetting Trip Data:
  • The computer typically accumulates trip data. To reset trip-specific data (like DST, MXS, AVS, TM), refer to the detailed instructions in the full manual for the specific button combination. Often, this involves holding the [MODE] or [SET] button while on the desired display.

10. เคล็ดลับผู้ใช้

• ตำแหน่งเซนเซอร์: For optimal performance, mount the wireless sensor on the front wheel fork. The closer the magnet and sensor are, the more reliable the speed detection.
• อายุการใช้งานแบตเตอรี่: While solar energy assists, the primary power comes from the button batteries. Always keep spare CR2302 batteries on hand for uninterrupted use.
• การจัดการข้อมูล: Understand that trip data (DST, TM, etc.) can usually be reset for each ride, while the total odometer (ODO) is cumulative.
• การใช้แบ็คไลท์: Use the short light mode for quick checks to conserve battery, and the long light mode for extended night riding when constant visibility is needed.

11. การรับประกันและการสนับสนุน

หากมีข้อสงสัยเกี่ยวกับผลิตภัณฑ์ การสนับสนุนทางเทคนิค หรือการเรียกร้องการรับประกัน โปรดติดต่อผู้ขายหรือผู้ผลิตโดยตรง โปรดเก็บใบเสร็จรับเงินไว้เป็นหลักฐานการซื้อ