SINGCALL APE80 Wireless Signal Ampคู่มือการใช้งาน lifier

1. สินค้าหมดview

The SINGCALL APE80 is a wireless signal amplifier designed to extend the receiving distance of a calling system. It acts as a repeater, ensuring that signals from call buttons (pagers) reach the receivers effectively, especially in larger areas or environments with signal obstructions. The device can be configured to transmit signals from all connected call buttons or only from specific registered ones.

2. ข้อมูลจำเพาะผลิตภัณฑ์

The APE80 amplifier holds CE, FCC, and RoHS certifications.

3. โครงสร้างและส่วนประกอบของผลิตภัณฑ์

The APE80 signal amplifier features a user-friendly design with clearly identifiable components for easy setup and operation.

• Sending Antenna: ส่ง amplified สัญญาณ
• เสาอากาศรับสัญญาณ: Receives signals from call buttons.
• Initialize Light: Indicates initialization status.
• Mode Light: Indicates the current transmitting mode.
• Registration Light: Indicates registration status.
• Receiving Light: Illuminates when a signal is being received.
• ไฟส่องสว่าง: แสดงว่าอุปกรณ์เปิดอยู่
• Transmitting Light: Illuminates when a signal is being transmitted.
• ปลั๊กไฟ: Connection point for the power adapter.
• Signal Strength Testing Light: Provides visual feedback on signal strength.
• Function Buttons (Call, Initialize, Mode, Register): Used for device configuration and operation.
• Pressing Key: General term for the operational buttons.
• ตำแหน่งตะขอ: Designated area for mounting the device.
• Supply Hub: พอร์ตอินพุตไฟ

4. คำแนะนำในการตั้งค่า

4.1. การเชื่อมต่อไฟฟ้า

1. First, electrify the power adapter by plugging it into a suitable power outlet.
2. Then, connect the power adapter to the 'Supply hub' (power plug) on the APE80 amplifier. The Power light should illuminate.

4.2 การปรับเสาอากาศ

1. Draw out both antennas from the ampชีวิต.
2. Adjust the antennas so that the angle between each antenna and the ground is approximately 45 degrees (upward).
3. The optimal length of the antennas may vary depending on the environment. Please check and adjust the length during installation for the best performance.

4.3. การเริ่มต้นใช้งาน Ampชีวิต

1. Press and hold the 'Initialize' key for approximately one second. The Initialize light will turn on.
2. Release the key and wait. The initialization process is complete when the Initialize light turns off.

4.4. Selecting the Installation Position

Proper placement is crucial for optimal signal amplification. Consider the following methods:

Method A: Intermediate Position

1. วาง amplifier in an intermediate position between the receiver and the farthest call button.
2. Press the farthest call button.
3. If the receiver successfully receives the signal, fix the amplifier in that position.
4. If the receiver does not receive the signal, hold the registered call button and slowly move the amplifier from the receiver towards the farthest call button, continuously pressing the call button until the receiver receives the signal. This is the ideal position to fix the ampชีวิต.

Method B: Using the 'Call' Key

1. Register the 'Call' key of the amplifier into the receiver (refer to the receiver's manual for registration instructions).
2. ย้าย amplifier from the receiver towards the farthest call button, continuously pressing the 'Call' key on the ampชีวิต.
3. The best location for the amplifier is the point where the receiver *stops* receiving the signal from the amplifier. If the area where the receiver cannot receive the signal is known, that location is the best place to fix the ampชีวิต.

Special Note: If another amplifier is already installed, ensure it is turned OFF when registering new pagers or changing pager numbers to avoid interference.

5. คู่มือการใช้งาน

5.1. Registering Call Buttons

การ amplifier has a capacity for up to 300 call buttons.

1. Press and hold the 'Register' key for approximately one second. The Registration light will turn on.
2. While the Registration light is on, press the call button that you wish to register.
3. If the Registration light blinks, the registration is successful.
4. If the call button was already registered, the Registration light will not blink.
5. To exit registration mode, press and hold the 'Register' key for approximately one second until the Registration light turns off.

5.2. Signal Transmitting Mode Setting

การ amplifier can operate in two signal transmitting modes:

Mode 1: Transmitting Signals of All Call Buttons

1. Ensure the Mode indicator light is ON.
2. Press and hold the 'Mode' key for approximately one second.
3. Release the key when the Mode light turns OFF. In this mode, the amplifier will transmit signals from all call buttons in use.

Mode 2: Transmitting Signals of Registered Call Buttons Only

1. Ensure the Mode indicator light is OFF.
2. Press and hold the 'Mode' key for approximately one second.
3. Release the key when the Mode light turns OFF. In this mode, the amplifier will only transmit signals from call buttons that have been specifically registered to it.

5.3. สถานะไฟแสดงสถานะ

• เปิดเครื่อง: Red lights flashing.
• Receiving Signal: Yellow lights flashing.
• Transmitting Signal: Green lights flashing.

6. การบำรุงรักษา

• Keep the device dry and avoid exposure to moisture to prevent circuit oxidation.
• ทำความสะอาดภายนอกด้วยผ้านุ่มและแห้ง ห้ามใช้สารเคมีรุนแรงหรือน้ำยาทำความสะอาดที่มีฤทธิ์กัดกร่อน
• Do not attempt to disassemble the product yourself. Unauthorized disassembly may cause damage and void the warranty.

7 การแก้ไขปัญหา

• ไม่มีสัญญาณ Ampการทำให้บริสุทธิ์:
  • Ensure the power adapter is properly connected and the Power light is on.
  • Verify that the antennas are correctly extended and angled at 45 degrees.
  • Re-evaluate the installation position using Method A or B described in Section 4.4.
  • Check for potential interference sources (see Section 8.1).
• Registration Light Not Blinking: If the registration light does not blink after pressing a call button, it indicates that the call button has already been registered.
• Abnormal Device Behavior: If you encounter any abnormal behavior or malfunction, do not attempt to repair the device yourself. Contact customer service engineers for assistance.
• Reduced Receiving Distance: The receiving distance can be influenced by weather conditions. Extreme weather may temporarily reduce performance.

8. Cautions and Safety Information

8.1. Interference Sources

To ensure optimal performance and prevent interference, keep the wireless calling products away from the following:

• สถานีฐานอุปกรณ์เคลื่อนที่
• ตู้เย็น เครื่องปรับอากาศ และเครื่องใช้ไฟฟ้ากำลังสูงอื่นๆ
• อุปกรณ์อัลตราโซนิคขนาดใหญ่ในโรงพยาบาล

8.2. แนวทางความปลอดภัยทั่วไป

• To avoid static electricity, it is recommended to install the amplifier on a physical wall and ensure no part of the human body comes into contact with the device during operation.
• Always use the original power adapter provided with the device. Using a non-original adapter may seriously affect product performance and could lead to damage, for which the user will be responsible.
• Ensure the antennas are positioned at a 45-degree angle and do not touch any other objects to maintain signal integrity.

9. เคล็ดลับผู้ใช้

ไม่มีคำแนะนำเฉพาะสำหรับผู้ใช้จากที่ให้ไว้viewหรือเนื้อหาถาม-ตอบ

10. การรับประกันและการสนับสนุน

The SINGCALL APE80 Wireless Signal Amplifier comes with a 1-month replacement warranty and 12 months of maintenance support. In case of any issues or abnormal findings, please contact our customer service engineers for assistance. Do not attempt to repair or disassemble the product yourself, as this may void your warranty.

For further details or to download the official user manual in PDF format, please refer to the following link: SINGCALL APE80 User Manual (PDF)