1. สินค้าหมดview
The Danfoss BFP 21 L3 is a high-quality diesel oil pump designed for reliable performance in various heating and industrial applications. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your pump.
วิดีโอ: จบแล้วview of various Danfoss industrial components, showcasing กลุ่มผลิตภัณฑ์ของแบรนด์
2. ข้อมูลด้านความปลอดภัย
Always observe general safety precautions when working with fuel systems and electrical components. Ensure the power supply is disconnected before any installation or maintenance work. Refer to local regulations and standards for specific safety requirements.
- Only qualified personnel should install and service the pump.
- สวมอุปกรณ์ป้องกันภัยส่วนบุคคล (PPE) ที่เหมาะสม
- Ensure proper ventilation when working with diesel fuel.
- Do not operate the pump if any damage is visible.
3. การติดตั้งและการตั้งค่า
Proper installation is crucial for the optimal performance and longevity of your Danfoss BFP 21 L3 pump. Follow these guidelines:
- การติดตั้ง: Mount the pump securely in a stable position, ensuring it is easily accessible for maintenance. The pump can be mounted in any position, but ensure the shaft is horizontal for best performance.
- ท่อน้ำมัน: Connect the fuel supply line to the 'V' (Vacuum/Suction) port and the pressure line to the 'P' (Pressure) port. The 'S' port is for the return/drain line. Ensure all connections are tight and leak-free. Observe the flow direction indicated by the arrow on the pump body.
- การเชื่อมต่อไฟฟ้า: Connect the pump to the appropriate power supply as specified on the product label. Ensure correct wiring to prevent damage to the pump or system.
- เลือดออก: After installation, the system must be properly bled to remove any air from the fuel lines. Consult your burner or system manual for specific bleeding procedures.
Image: Danfoss BFP 21 L3 Diesel Oil Pump, showing the 'P' (Pressure), 'V' (Vacuum/Suction), and 'S' (Return/Drain) ports, along with the flow direction arrow and 'Bio 10' compatibility marking.
ภาพ: ด้านข้าง view of the Danfoss BFP 21 L3 Diesel Oil Pump, highlighting its compact design.
Image: Another perspective of the Danfoss BFP 21 L3 Diesel Oil Pump, showing the electrical connector.
4. การดำเนินการ
Once installed and bled, the Danfoss BFP 21 L3 pump operates automatically as part of your heating or industrial system. It is designed to deliver a consistent flow of diesel oil to the burner or application.
- Ensure the fuel tank has an adequate supply of clean diesel fuel.
- Monitor system pressure and flow to ensure optimal performance.
- The pump is compatible with up to 10% biodiesel (Bio 10).
5. การบำรุงรักษา
Regular maintenance helps ensure the longevity and efficiency of your pump.
- การเปลี่ยนตัวกรอง: The pump typically incorporates a filter. Check and replace the filter cartridge regularly according to the system's maintenance schedule or if flow issues occur.
- การตรวจสอบการรั่วไหล: Periodically inspect all fuel line connections for any signs of leaks. Tighten connections as necessary.
- การทำความสะอาด: รักษาความสะอาดภายนอกของปั๊มให้ปราศจากฝุ่นและสิ่งสกปรก
- ซีลเพลา: Monitor the shaft seal for any signs of leakage. If a leak is detected, the seal should be replaced by a qualified technician.
6 การแก้ไขปัญหา
If you encounter issues with your Danfoss BFP 21 L3 pump, refer to the following common problems and solutions:
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| No fuel flow | Empty fuel tank, clogged filter, air in system, faulty motor | Check fuel level, replace filter, bleed system, check motor connections/function |
| Reduced pressure/flow | Partially clogged filter, air in system, worn pump components | Replace filter, bleed system, inspect pump for wear (professional service recommended) |
| ปั๊มมีเสียงดัง | Air in system, cavitation, loose mounting | Bleed system, check for restrictions in suction line, tighten mounting bolts |
| การรั่วไหลของน้ำมันเชื้อเพลิง | การเชื่อมต่อหลวม ซีลชำรุด | Tighten connections, replace damaged seals (professional service recommended) |
7. ข้อมูลจำเพาะ
Key technical specifications for the Danfoss BFP 21 L3 Diesel Oil Pump (071N0107):
- แบบอย่าง: บีเอฟพี 21 L3
- หมายเลขชิ้นส่วน: 071N0107
- พิมพ์: ปั๊มน้ำมันดีเซล
- ความเข้ากันได้: Up to 10% Biodiesel (Bio 10)
- ต้นทาง: ผลิตในประเทศเดนมาร์ก
- น้ำหนักแพ็คเกจ: ประมาณ 1.9 กก.
- ขนาดแพ็คเกจ: ขนาดโดยประมาณ 20 ซม. (ยาว) x 18 ซม. (กว้าง) x 18 ซม. (สูง)
For detailed performance curves and specific pressure/flow ratings, please refer to the official Danfoss product datasheet for the BFP 21 L3 series.
8. เคล็ดลับผู้ใช้
- Always use clean, high-quality diesel fuel to prevent clogging and premature wear.
- Regularly inspect and clean the fuel filter to maintain optimal pump performance.
- Ensure all connections are properly sealed to prevent air ingress, which can lead to cavitation and reduced efficiency.
- If the pump is to be stored for an extended period, ensure it is drained of fuel and stored in a dry, protected environment.
9. การสนับสนุน
For further technical assistance, spare parts, or service, please contact your authorized Danfoss distributor or visit the official Danfoss website. When contacting support, please have your pump's model number (BFP 21 L3) and part number (071N0107) readily available.