Heltec Wireless Brushless DC Controller User Manual

1. บทนำ

This manual provides detailed instructions for the installation, operation, and maintenance of your Heltec Wireless Brushless DC Controller. Designed for electric two-wheelers and three-wheelers, this controller offers reliable performance with advanced features such as anti-theft, multi-speed control, reversing, and repair functions. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

2. สินค้าหมดview

The Heltec Brushless DC Controller is a high-performance component for electric vehicles, offering robust power output and intelligent control. It is compatible with a wide range of electric two-wheelers (e.g., e-bikes, scooters) and three-wheelers (e.g., tricycles).

คุณสมบัติที่สำคัญ ได้แก่:

• กำลังขับสูง: Available in 2000W and 2500W versions for strong acceleration and climbing ability.
• หลายเล่มtagอีสนับสนุน: Operates with 48V, 60V, or 72V battery systems.
• การควบคุมแบบไร้สาย: Simplifies installation and reduces wiring complexity.
• ทนทาน Casing: Features an aluminum waterproof, moisture-proof, and dust-proof casing for extended service life.
• การทำงานที่มีเสียงรบกวนต่ำ: Engineered for quiet performance, as low as 15 decibels.

3. ข้อมูลจำเพาะ

Refer to the table below for detailed product parameters for both models.

4. เนื้อหาบรรจุภัณฑ์

แพ็คเกจประกอบด้วยรายการต่อไปนี้:

For 2000W Model:

• ตัวควบคุม * 1
• สกรู * 5
• Function lines * 3

For 2500W Model:

• ตัวควบคุม * 1
• สกรู * 5
• Function lines * 3

5. การติดตั้งและการตั้งค่า

This section describes the wiring harness connections for the controller. Please ensure all connections are secure and correct before powering on the system. If the provided plugs are not universal for your vehicle, you may need to adapt the wiring according to the functional wire ends.

5.1. Controller Wiring Harness Description (2500W Model)

• Hall line: Connects to the motor's Hall sensors for position feedback.
• Study line: Used for motor learning/matching.
• Burglar alarm: Connects to the vehicle's alarm system.
• Turn handle: Connects to the throttle/accelerator.
• จอแสดงผล LCD: Connects to the vehicle's LCD display for information.
• เครื่องดนตรี: Connects to other vehicle instruments.
• Low brake: Connects to the low-level brake signal.
• High brake: Connects to the high-level brake signal.
• ล่องเรือ: For cruise control functionality.
• สายไฟ: แหล่งจ่ายไฟหลักมาจากแบตเตอรี่
• Astern: For reverse gear functionality.
• Three cycle: Likely related to a three-speed mode or cycle function.
• สามความเร็ว: For selecting between different speed modes.

5.2. Controller Wiring Harness Description (2000W Model)

• Hall line: Connects to the motor's Hall sensors for position feedback.
• Study wire: Used for motor learning/matching.
• Burglar alarm: Connects to the vehicle's alarm system.
• Alarm Power supply: Provides power for the alarm system.
• Turn handle: Connects to the throttle/accelerator.
• One-click access: Function for quick access or mode change.
• Yadea Instrument: Connects to Yadea brand instruments.
• Astern: For reverse gear functionality.
• Low brake: Connects to the low-level brake signal.
• High brake: Connects to the high-level brake signal.
• ล่องเรือ: For cruise control functionality.
• Positive electrode wire: Main positive power connection.
• Soft and hard start: For adjusting acceleration characteristics.
• สามความเร็ว: For selecting between different speed modes.
• Three speed cycle: For cycling through speed modes.

5.3. General Connection Guidance

Ensure all connections are made according to your vehicle's wiring diagram and the functions described above. Incorrect wiring can damage the controller or other vehicle components.

6. คู่มือการใช้งาน

Once the controller is correctly installed and connected, you can operate your electric vehicle using its various functions:

• เปิด/ปิดเครื่อง: Use your vehicle's main power switch. The controller will initialize automatically.
• การควบคุมความเร็ว: Use the 'Turn handle' (throttle) to control the vehicle's speed.
• โหมดความเร็วสามระดับ: If your vehicle supports it, use the 'Three speed' or 'Three speed cycle' wire to switch between different speed settings (e.g., low, medium, high).
• การย้อนกลับ: Activate the 'Astern' function for reverse movement, if available on your vehicle.
• การเบรก: The controller integrates with your vehicle's braking system via 'Low brake' and 'High brake' lines.
• ป้องกันการโจรกรรม: If connected to an alarm system, the controller supports anti-theft features.
• ระบบควบคุมความเร็วอัตโนมัติ: Engage the 'Cruise' function for maintaining a constant speed, if supported.
• One-Line Pass / Repair: These functions are typically for diagnostic or specific operational modes. Consult your vehicle's manual for specific usage.

7. การบำรุงรักษา

To ensure the longevity and optimal performance of your Heltec Brushless DC Controller, follow these maintenance guidelines:

• รักษาความสะอาด: Regularly clean the exterior of the controller to prevent dust and dirt buildup. Use a soft, dry cloth.
• หลีกเลี่ยงความชื้น: ในขณะที่ casing is waterproof and moisture-proof, avoid prolonged exposure to extreme wet conditions or submersion. Ensure all connections are dry before operation.
• ตรวจสอบการเชื่อมต่อ: Periodically inspect all wiring connections for tightness and signs of wear or corrosion. Loose connections can lead to intermittent operation or damage.
• การจัดการอุณหภูมิ: Ensure the controller is installed in a location with adequate airflow to prevent overheating, especially during heavy use.
• หลีกเลี่ยงผลกระทบ: Protect the controller from physical impact, which can damage internal components.

8 การแก้ไขปัญหา

หากคุณพบปัญหาเกี่ยวกับคอนโทรลเลอร์ โปรดลองทำตามขั้นตอนการแก้ไขปัญหาทั่วไปต่อไปนี้:

• ไม่มีไฟฟ้า: Check battery connections, main power switch, and the controller's power cord. Ensure the battery is charged.
• มอเตอร์ไม่ตอบสนอง: Verify all motor phase wires and Hall sensor connections. Check the throttle ('Turn handle') connection.
• การทำงานเป็นระยะ: ตรวจสอบสายไฟทั้งหมดว่ามีจุดเชื่อมต่อหลวมหรือฉนวนเสียหายหรือไม่
• เสียงผิดปกติ: Ensure the motor is properly connected and there are no mechanical obstructions.
• ความร้อนสูงเกินไป: Check for proper ventilation around the controller. Reduce load if operating in extreme conditions.

For persistent issues, it is recommended to consult a qualified technician or contact Heltec customer support.

9. เคล็ดลับผู้ใช้

• ตั้งค่าเริ่มต้น: After installation, perform a motor learning procedure (using the 'Study line') if your motor and controller are not pre-matched. This optimizes performance.
• เล่มที่tagความเข้ากันได้: Always ensure your battery voltage matches the controller's supported voltage range (48V/60V/72V) to prevent damage.
• การติดตั้งโดยมืออาชีพ: If you are unfamiliar with electrical wiring, it is highly recommended to seek professional assistance for installation to avoid potential hazards.

10. การรับประกันและการสนับสนุน

For warranty information, technical support, or service inquiries, please contact HeltecTools Store directly. Keep your purchase receipt as proof of purchase. Do not attempt to open or modify the controller, as this may void your warranty.