DOMRAEM ESP32 WLED Digital Music Controller User Manual

1. สินค้าหมดview

The DOMRAEM ESP32 WLED Digital Music Controller (DOM-WLE-AM) is an advanced, open-source based controller designed for smart LED strip lighting. It features a built-in microphone for music synchronization, supports a wide range of addressable LED chips, and offers versatile control options via a mobile app, voice assistants like Alexa, and integration with smart home platforms like MQTT and Home Assistant.

คุณสมบัติหลัก:

• ฉบับกว้างtage Input & High Power Output: Supports 5-24V DC input with 12A per channel and 16A total output capacity. Includes a USB-C 5V/5A direct power supply interface.
• Smart WiFi Connectivity & Open-Source Control: Utilizes ESP32 WLED wireless control technology, allowing direct WiFi connection and easy management via the WLED app. Open-source code supports developer customization and continuous upgrades.
• Sound-Activated & Music Sync: Built-in microphone enables sound-reactive lighting effects that automatically synchronize with music rhythm.
• Multi-Smart Control: Compatible with mainstream voice assistants (Alexa/Google Assistant) and supports dual control modes: remote (sold separately) and mobile app.
• 100+ Lighting Effects: Features a built-in professional-grade lighting effects library, fully supporting DIMMER/RGB/RGBW/RGBCCT light strips for personalized lighting scenes.
• Energy-Efficient Eco-Design: Standby power consumption of approximately 0.5W, ensuring long-term stable operation.
• Extensive Hardware Compatibility: Compatible with mainstream LED chips including WS2811, SK6812, WS2812B, WS2813, WS2814, WS2815, TM1814, and WS2805.

จุดเด่นของผลิตภัณฑ์:

• Industrial-grade circuit protection design.
• Professional open-source lighting control system.
• One-touch smart scene switching.
• Minimalist aesthetic exterior design.

2. เนื้อหาบรรจุภัณฑ์

กรุณาตรวจสอบแพ็คเกจสำหรับรายการต่อไปนี้:

• 1x DOMRAEM ESP32 WLED Digital Music Controller (DOM-WLE-AM)

Note: LED strips, power supply, and remote control are sold separately and are not included in this package.

3. ข้อมูลจำเพาะ

4. คู่มือการติดตั้ง

4.1 Powering the Controller

The DOMRAEM WLED controller offers flexible power options:

• อินพุต DC 5-24V: Connect a compatible DC power supply to the 'INPUT DC5V-24V' terminal. Ensure the voltage matches your LED strip requirements.
• USB-C 5V/5A Input: For 5V LED strips, you can use a USB-C power adapter connected to the 'INPUT USB-C DC5V/5A' port. Do not exceed 5A when using USB-C.
• อินเทอร์เฟซจ่ายไฟ V+, V-: An additional V+, V- power interface is available for direct power connection.

4.2 Wiring LED Strips

The controller features quick connect port design for convenient wiring. Follow these steps:

1. เปิดตัวเชื่อมต่อ: Gently open the connector upwards.
2. ใส่ลวด: Insert the stripped wire into the appropriate terminal.
3. กดลง: Press down on the connector to secure the wire.

คำแนะนำในการเดินสายไฟ:

• The group of D for GPIO16 is the default output. Please use this group first.
• The other group of D is GPIO2, which can be used after configuration on the APP.
• Ensure correct polarity: V=VCC, D=DATA, G=GND.

4.3 การติดตั้งแอพ

The WLED app is essential for controlling your LED strips. Download it using the following methods:

• ไอโอเอส: ค้นหา "WLED" or "WLED Native" in the Apple App Store.
• แอนดรอยด์: Download from the official GitHub repository: github.com/Aircoookie/WLED-App/releases

4.4 Initial App Configuration (WiFi Setup)

Follow these steps to connect your controller to your WiFi network and the WLED app:

1. ขั้นตอนที่หนึ่ง: Power on the WLED controller. Open the phone settings and connect to the WLED-AP WiFi network (password: wled1234).
2. ขั้นตอนที่สอง: After successful connection, it will automatically redirect to the WLED page. If not, open a browser and enter the WLED page. Click on "WIFI SETTINGS".
3. ขั้นตอนที่สาม: Click "Scan" to display the account. บันทึก: Be sure to choose a 2.4GHz WiFi network, otherwise it will not work.
4. ขั้นตอนที่สี่: Enter the password, then click "save" at the top of the screen after entering the password.
5. ขั้นตอนที่ห้า: Connect your phone and WLED controller to the same WiFi.
6. ขั้นตอนที่หก: Enter the WLED page for configuration.
7. ขั้นตอนที่เจ็ด: Click on "Blank space" to enter the WLED page.
8. ขั้นตอนที่แปด: After successful application, open WLED app.

5. คู่มือการใช้งาน

5.1 Basic App Control (Colors and Effects)

Once connected to the WLED app, you can easily control your LED strips:

• สี: Use the color wheel to select static colors or choose from predefined color palettes.
• ผลกระทบ: Browse through over 100 dynamic effects. Adjust speed, intensity, and other parameters for each effect.
• ส่วนต่างๆ: Divide your LED strip into multiple sections and apply unique colors and effects to each segment independently.

5.2 โหมดเพลง

The built-in sensitive microphone allows the ESP32 WLED controller to follow music dynamic mode. After resetting, the microphone parameters need to be configured for the first time, and the device needs to be restarted.

ข้อมูลการกำหนดค่า:

1. ประเภทไมโครโฟน: I2S ทั่วไป
2. ขา I2S SD: 26
3. ขา I2S WS: 5
4. ขา I2S SCK: 21

5.3 Voice Assistant Integration (Alexa)

To connect your WLED controller with Alexa, follow these steps:

1. Go to the control page of the WLED controller, click on the "Config" button in the top right corner to enter the settings, and then click on "Sync Interfaces".
2. Scroll up to find "Alexa Voice Assistant", check the box next to "Emulate Alexa device", and then save.
3. After successfully saving, power cycle the WLED controller once by turning it off and on.
4. Open "Amazon Alexa" app, click on the "Devices" page at the top right corner on the "+" Sign, and then click "Add Device".
5. Then, scroll up and click on "Other" to enter, select "Wi-Fi", and then click "Discover Devices" to search for lights.

5.4 ฟังก์ชันปุ่ม

The controller has two buttons: Reset and Opt.

• ปุ่มรีเซ็ต: Pressing this button will put the controller module in a powered-off state, making the WLED controller unusable. Releasing the button will power the module back on, then you can use WLED controller normally. This button is useful for powering the controller on and off when it's inconvenient.
• Opt Button:
  1. กดสั้นๆ: เปิด/ปิดเครื่อง
  2. กดค้างเป็นเวลา 1 วินาที: สลับสี
  3. Long press for more than 10 seconds: The WLED device will be reset to factory settings and the WLED-AP hotspot will be activated. Do not use unless it is an emergency! If the factory settings have been restored, please refer to the instruction manual to configure the device correctly.

5.5 การกำหนดค่ารีเลย์

The controller supports relay configuration. When the power is turned off, there is no current passing through the LED strip, thus reducing power consumption. This can be configured within the WLED app settings.

5.6 WLED Remote Control (Optional)

The controller supports WLED remote control for long transmission distance and stable signal. Please note that the WLED remote control is sold separately and is not included with the controller.

5.7 Supported LED Strip Types

The controller supports most addressable LED strip types, including:

• WS2811
• WS2812
• WS2814
• WS2815
• สก6812
• เอสเอ็ม16703
• SM16703P3
• ฟล1903บี

5.8 วิดีโอสาธิตผลิตภัณฑ์

6. การบำรุงรักษา

To ensure the longevity and optimal performance of your DOMRAEM WLED Digital Music Controller, please follow these maintenance guidelines:

• การทำความสะอาด: Use a soft, dry cloth to clean the exterior of the controller. Avoid using liquid cleaners or solvents, as they may damage the device.
• สิ่งแวดล้อม: Operate the controller within the specified operating temperature range of -20 to 45°C. Avoid exposing it to extreme temperatures, high humidity, or direct sunlight.
• การเชื่อมต่อ: ตรวจสอบการเชื่อมต่อสายไฟทั้งหมดเป็นระยะเพื่อให้แน่ใจว่าแน่นหนาและปราศจากการกัดกร่อน การเชื่อมต่อที่หลวมอาจทำให้การทำงานไม่ต่อเนื่องหรือเกิดความเสียหายได้
• พื้นที่จัดเก็บ: If storing the controller for an extended period, disconnect it from power and store it in a cool, dry place.

7 การแก้ไขปัญหา

If you encounter issues with your DOMRAEM WLED Digital Music Controller, refer to the following troubleshooting tips:

7.1 LEDs Not Responding After Reset/Update

Important: After any reset or OTA update, you MUST configure GPIO12, then briefly press Reset or power cycle the controller. Refer to the manual for detailed configuration.

• Check GPIO12 Configuration: Ensure GPIO12 is correctly configured in the WLED app settings. If abnormal, reconfigure and reboot the controller.
• ตรวจสอบพาวเวอร์ซัพพลาย: If GPIO12 configuration is normal, check the power supply circuit for any issues. Ensure the power supply is providing the correct voltage and sufficient current for your LED strips.

7.2 Connectivity Issues (WiFi)

• Verify WiFi Network: Ensure your phone and the WLED controller are connected to the same 2.4GHz WiFi network. The controller does not support 5GHz networks.
• ตรวจสอบรหัสผ่าน: Double-check that the WiFi password entered during setup is correct.
• Restart Router/Controller: Try restarting your WiFi router and the WLED controller.
• รีเซ็ตเป็นการตั้งค่าจากโรงงาน: If all else fails, perform a factory reset by long-pressing the 'Opt' button for more than 10 seconds. Then, repeat the initial app configuration steps.

7.3 Microphone Not Responding

• การกำหนดค่าเริ่มต้น: After resetting the device, the microphone parameters (I2S SD pin, WS pin, SCK pin) must be configured in the WLED app settings. Refer to section 5.2.
• รีสตาร์ทอุปกรณ์: After configuring microphone parameters, restart the controller for changes to take effect.

8. เคล็ดลับผู้ใช้

• For optimal performance, ensure your power supply is adequately rated for the length and density of your LED strips.
• Experiment with different effects and segments in the WLED app to discover unique lighting combinations.
• ตรวจสอบการอัปเดตเฟิร์มแวร์ WLED เป็นประจำเพื่อเข้าถึงคุณสมบัติและการปรับปรุงใหม่ๆ
• When using voice control, ensure clear pronunciation and that your voice assistant is properly linked to the WLED controller.

9. การรับประกันและการสนับสนุน

The DOMRAEM ESP32 WLED Digital Music Controller comes with a รับประกัน 2 ปี นับจากวันที่ซื้อ โดยครอบคลุมถึงข้อบกพร่องจากการผลิต โปรดเก็บหลักฐานการซื้อไว้เพื่อขอรับสิทธิ์การรับประกัน

For technical support, troubleshooting assistance, or warranty inquiries, please contact your retailer or visit the official DOMRAEM support webเว็บไซต์.

10. ข้อมูลด้านความปลอดภัย

• ตรวจสอบให้แน่ใจเสมอว่าปริมาตรอินพุตถูกต้องtage (DC 5-24V) matches the requirements of your LED strips and power supply. Exceeding the maximum voltage or current can damage the controller and LED strips.
• When using the USB-C input, ensure the power supply does not exceed 5V/5A.
• Ensure all wiring is correctly connected with proper polarity (VCC, Data, GND) to prevent damage.
• Do not expose the controller to water, moisture, or extreme temperatures.
• เก็บอุปกรณ์ให้ห่างจากเด็ก
• Do not attempt to open or modify the controller, as this will void the warranty and may pose a safety risk.