GEYA W2R-100

GEYA W2R ATS Dual Power Automatic Transfer Switch User Manual

Model: W2R-100 | Brand: GEYA

1. สินค้าหมดview

The GEYA W2R Automatic Transfer Switch (ATS) is designed to automatically switch between a main power source and a backup power source, ensuring an uninterrupted power supply for various applications. It supports both automatic and manual operation modes and includes real-time voltage monitoring and protection features.

คุณสมบัติที่สำคัญ ได้แก่:

  • Quick switching time: Less than 50 milliseconds.
  • เล่มที่tage compatibility: Supports 110V or 220V systems.
  • PC Level performance.
  • Integrated Overvoltagการป้องกันอี
  • Integrated Undervoltagการป้องกันอี
  • High current capacity: Up to 100A.
GEYA W2R ATS Dual Power Automatic Transfer Switch with key features listed
Figure 1: GEYA W2R ATS Dual Power Automatic Transfer Switch highlighting its main features.

2. ข้อควรระวังเพื่อความปลอดภัย

WARNING: Electrical installation should only be performed by qualified personnel. Always disconnect power before installation or maintenance.

  • ตรวจสอบให้แน่ใจว่าได้รับการจัดอันดับ voltage of both the main and backup power supplies is within 85%-110% of the rated value.
  • The operating current must not be less than 5A. Failure to meet these requirements may cause the coil to overheat or spontaneously combust.
  • If your local grid voltage is unstable, it is strongly recommended to install additional voltage protectors in the system.
  • For stable and reliable switching when connecting a PV inverter, ensure it is a Pure Sine Wave type with a rated power greater than 3000W.

3. การติดตั้งและเดินสายไฟ

3.1 ส่วนประกอบเหนือview

ภาพระยะใกล้ view of GEYA W2R ATS components including copper terminals, guide rail installation, and silver contacts.
รูปที่ 2: รายละเอียด view of the ATS components: Copper Terminals, Guide Rail Installation, and Silver Contacts.

The GEYA W2R ATS features robust copper terminals for secure connections, silver contacts for reliable switching, and is designed for easy guide rail installation.

3.2 แผนผังการเดินสายไฟ

The following diagrams illustrate typical wiring configurations for the GEYA W2R ATS. Ensure all connections are secure and comply with local electrical codes.

Wiring diagrams for 2-pole and 4-pole GEYA W2R ATS, showing connections for common power supply, standby power supply, backup control line, load output, and alternate control line.
Figure 3: Product Wiring Diagram for 2-pole and 4-pole configurations.

For 2-Pole Configuration (Top Left Diagram):

  • Connect the Common Power Supply (L, N) to the designated terminals.
  • Connect the Standby Power Supply to its respective terminals.
  • Connect the Backup Control Line.
  • Connect the Load Output to your electrical loads.

For 4-Pole Configuration (Top Right Diagram):

  • Connect the Common Power Supply (L1, L2, L3, N) to the designated terminals.
  • Connect the Backup Power to its respective terminals.
  • Connect the Alternate Control Line.
  • Connect the Load Output to your electrical loads.

หมายเหตุการเดินสายไฟทั่วไป:

  • Ensure proper phase sequence for multi-phase systems.
  • All connections must be tight to prevent loose contacts and overheating.

3.3 Connecting External Indicators

The ATS provides passive terminals (NO, C, NC) for connecting external indicators, allowing you to monitor the product's operation from outside the cabinet.

Wiring diagram for connecting external indicators to the GEYA W2R ATS, showing common closing/opening and backup closing/opening indicators.
Figure 4: Wiring for External Indicators.

Connect your common closing/opening indicators and backup closing/opening indicators to the NO, C, NC terminals as shown in Figure 4. These are passive terminals and do not supply voltage.

4. การดำเนินการ

4.1 โหมดอัตโนมัติและโหมดแมนนวล

The GEYA W2R ATS supports both automatic and manual operation. Use the selection switch on the unit to choose your desired mode.

GEYA W2R ATS showing the manual/automatic selection switch and LED indicators for normal and abnormal voltage.
Figure 5: Manual/Automatic Selection Switch and LED Indicators.
  • โหมดอัตโนมัติ: The switch will automatically transfer power sources based on voltagอีเงื่อนไข
  • โหมดแมนนวล: Allows for manual switching using the handle. This mode is typically used for testing or specific maintenance scenarios.

4.2 Power Transfer Function

The ATS is designed to seamlessly switch between power sources in case of a mains failure or restoration.

Diagram illustrating the function of the Automatic Transfer Switch: switching from City Power/PV AC Power to Standby Power Generator upon mains failure, and back when mains are normal, with a 50ms switch time.
Figure 6: Automatic Transfer Switch Function Diagram.

The transfer time is less than 50 milliseconds, ensuring minimal disruption to connected loads.

4.3 ฉบับtage Monitoring and LED Indicators

The device continuously monitors the voltage of the connected power sources and provides visual feedback through LED indicators.

เงื่อนไขสถานะ LEDการกระทำ
เล่มปกติtageTwo LEDs stay on constantly.ไม่ต้องดำเนินการใดๆ
ฉบับผิดปกติtage (General)Lights are flickering. LED displays a breathing effect (dims gradually during undervoltage, brightens gradually during overvoltagจ).Switches to standby power after a 10-second delay (default setting).
โอเวอร์โวลtage สถานะLED flashes twice every 2 seconds.Automatic transfer to standby power if configured.
อันเดอร์โวลtage สถานะLED flashes once every 2 seconds.Automatic transfer to standby power if configured.

เล่มที่tage Protection Parameters (for 220V W2R):

  • อันเดอร์โวลtage Trip Value: 175V
  • อันเดอร์โวลtage Recovery Value: 190V
  • โอเวอร์โวลtage Trip Value: 270V
  • โอเวอร์โวลtage Recovery Value: 250V
  • Delay for Trip: 10 seconds
  • Delay for Reset: 30 seconds

5. การบำรุงรักษา

The GEYA W2R ATS is designed for minimal maintenance. However, regular checks are recommended to ensure optimal performance and safety.

  • การตรวจสอบภาพ: Periodically inspect the unit for any signs of physical damage, loose connections, or discoloration.
  • ความแน่นที่ปลายสาย: Ensure all wiring terminals remain tight. Loose connections can lead to overheating and potential hazards.
  • ฝุ่นและเศษขยะ: Keep the unit free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners.
  • การทดสอบการทำงาน: Periodically test the automatic transfer function by simulating a main power failure (if safely possible and recommended by a qualified electrician).
  • การตรวจสอบอย่างมืออาชีพ: It is advisable to have a qualified electrician inspect the unit and its connections annually.

6 การแก้ไขปัญหา

This section provides guidance on common issues you might encounter with your GEYA W2R ATS.

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
ATS does not transfer power automatically.
  • เล่มที่tage of main or backup power is outside the 85%-110% rated range.
  • Operating current is less than 5A.
  • Unit is in Manual mode.
  • Faulty wiring or connections.
  • ตรวจสอบอินพุต voltages and ensure they are within the specified range.
  • Verify the load current meets the minimum requirement.
  • Switch the unit to Automatic mode.
  • Inspect all wiring connections for tightness and correctness. Consult a qualified electrician if unsure.
LED indicators are flickering or flashing.
  • ปริมาตรผิดปกติtage detected (overvoltage หรือ undervoltagจ).
  • Refer to Section 4.3 "Voltage Monitoring and LED Indicators" to interpret the specific flashing pattern.
  • ตรวจสอบปริมาณtage of the power supply. Consider installing additional voltage protectors if the grid is unstable.
หน่วยร้อนเกินไป
  • จัดอันดับฉบับtage or current requirements not met.
  • การเชื่อมต่อที่หลวม
  • รับรองปริมาณtage is within 85%-110% of rated value and current is not less than 5A.
  • ตรวจสอบและขันน็อตเชื่อมต่อไฟฟ้าทั้งหมดให้แน่น
Issues with PV Inverter connection.
  • Inverter is not a Pure Sine Wave type.
  • Inverter rated power is less than 3000W.
  • Ensure the PV inverter is a Pure Sine Wave type.
  • Verify the PV inverter has a rated power greater than 3000W for stable operation.

7. ข้อมูลจำเพาะ

คุณสมบัติข้อมูลจำเพาะ
ชื่อยี่ห้อเกย่า
หมายเลขรุ่นดับเบิ้ลยู2อาร์-100
ประเภทสวิตซ์สวิตช์สากล
กระแสไฟฟ้าที่ได้รับการจัดอันดับ100เอ
คอยล์ Voltage220โวลต์
เสา2P, 4P
จัดอันดับแรงกระตุ้นต้านทานVoltagอี (KV)8KV AC 110V or 220V
จัดอันดับอุปทานVoltage เรา50เฮิรตซ์
สภาพการทำงาน85% Us - 110% Us
เวลาการสลับ<50มิลลิวินาที
เวลาการดำเนินการ<50มิลลิวินาที
ชีวิตไฟฟ้า2000 ครั้ง
ชีวิตเครื่องจักร5000 ครั้ง
วัสดุพลาสติก
เป็นอุปกรณ์อัจฉริยะเลขที่
การรับรองCE
ต้นทางจีนแผ่นดินใหญ่
EU LVD Voltageปริมาณต่ำtage: Below 50Vac or 75Vdc
สารเคมีที่น่ากังวลสูงไม่มี

7.1 ขนาด (โดยประมาณ)

Diagram showing dimensions of the GEYA W2R-100 ATS unit in millimeters.
Figure 7: Product Dimensions (Unit: mm).
  • ความกว้าง : 78.5 มม.
  • ความสูง : 103 มม.
  • Depth (2P): 107.5 mm
  • Depth (3P): 125.5 mm
  • Depth (4P): 142.5 mm
  • ความลึกของการติดตั้ง: 35 มม

8. การรับประกันและการสนับสนุน

8.1 การรับประกันสินค้า

The GEYA W2R ATS comes with a รับประกัน 2 ปี from the date of purchase, covering manufacturing defects and malfunctions under normal operating conditions.

8.2 การสนับสนุนด้านเทคนิค

For technical assistance, inquiries, or support, please contact GEYA customer service:

  • Webเว็บไซต์: www.geya.net
  • อีเมล: cassie@cngeya.com
  • โทรศัพท์: +86 13968799499
  • Address: Wenzhou Bridge Industrial Zone, Beibaixiang Town, Wenzhou City, Zhejiang Province

เอกสารที่เกี่ยวข้อง - ดับเบิ้ลยู2อาร์-100

พรีview GEYA W2R-W1 Smart ATS Quick Start Guide: Dual Power Automatic Transfer Switch
Get started quickly with the GEYA W2R-W1 Smart ATS Dual Power Automatic Transfer Switch. This guide covers setup, network configuration, and device management for this 2P/3P/4P Din Rail device, ensuring uninterrupted power supply.
พรีview EARU EAATS-A Automatic Transfer Switch: User Manual & Safety Guide
This manual provides essential safety instructions, product description, and technical specifications for the EARU EAATS-A Automatic Transfer Switch, a miniature dual power switch for household and standby power management.
พรีview คู่มือการใช้งานสวิตช์ถ่ายโอนอัตโนมัติแบบคู่ที่ทำงานได้ในเวลามิลลิวินาทีของ Zhejiang Geya Electrical
คู่มือนี้ให้ข้อมูลโดยละเอียดเกี่ยวกับสวิตช์สลับไฟอัตโนมัติแบบคู่ที่ทำงานต่อเนื่องในระดับมิลลิวินาทีของบริษัท Zhejiang Geya Electrical Co., Ltd. ซึ่งรวมถึงข้อมูลทั่วไป พารามิเตอร์ทางเทคนิค การติดตั้ง การเดินสาย การบำรุงรักษา และข้อควรระวังด้านความปลอดภัย
พรีview คู่มือการใช้งานสวิตช์ถ่ายโอนอัตโนมัติ
คู่มือการใช้งานสำหรับสวิตช์ถ่ายโอนอัตโนมัติอัจฉริยะแบบสองแหล่งพลังงาน (Dual Power Smart Automatic Transfer Switch หรือ ATS) จาก MOES ซึ่งให้รายละเอียดเกี่ยวกับการติดตั้ง การใช้งาน ข้อมูลจำเพาะ และข้อแนะนำด้านความปลอดภัยสำหรับระบบพลังงานแสงอาทิตย์และพลังงานลมแบบออฟกริด
พรีview คู่มือผู้ใช้ ONLINE ATS-16A Automatic Transfer Switch
คู่มือผู้ใช้ที่ครอบคลุมสำหรับสวิตช์ถ่ายโอนอัตโนมัติ ONLINE ATS-16A ซึ่งมีรายละเอียดเกี่ยวกับคุณลักษณะ การติดตั้ง การทำงาน ข้อมูลจำเพาะ และการแก้ไขปัญหาสำหรับการจัดการพลังงานแหล่งคู่ที่เชื่อถือได้
พรีview สวิตช์ถ่ายโอนอัตโนมัติ GEYA (ATS) G2R-63/00 - ข้อมูลจำเพาะทางเทคนิค
ข้อมูลจำเพาะทางเทคนิคโดยละเอียดและคำแนะนำในการติดตั้งสำหรับสวิตช์ถ่ายโอนอัตโนมัติ (ATS) GEYA G2R-63/00 ซึ่งมีคุณลักษณะการสลับคลาสพีซีสำหรับแหล่งพลังงานคู่ เงื่อนไขการทำงาน และขั้นตอนการบำรุงรักษา

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.