การแนะนำ
The Creality Multi-kilo Filament Dryer is designed to provide an ultimate solution for consistent, high-quality 3D prints by effectively removing moisture from your filament. Damp filament can lead to common printing issues such as stringing, clogging, and layer separation. This device ensures rapid moisture extraction with precise temperature control, resulting in superior surface finish and structural integrity for your printed objects.
It is universally compatible, accommodating 1kg, 2kg, 3kg, and 5kg filament spools, and supports both 1.75mm and 2.85mm filament diameters. The dryer features a 400W PTC hot air heater capable of reaching 70°C within 5 minutes for fast and effective drying. It also includes a timer for 1-48 hours of timed drying and a power-off temperature memory function for convenience. Constructed with fire-retardant materials and an Oxford fabric exterior that remains below 50°C during operation, safety is assured. The flexible modular chamber heater design allows the heating module to be detached and repurposed as a chamber heater for your printer or for creating a custom filament drying box.
คำแนะนำการตั้งค่า
The Creality Multi-kilo Filament Dryer is designed for quick and straightforward installation. Follow these general steps to set up your dryer:
- แกะส่วนประกอบ: นำชิ้นส่วนทั้งหมดออกจากบรรจุภัณฑ์อย่างระมัดระวัง ตรวจสอบให้แน่ใจว่ามีชิ้นส่วนครบถ้วนตามรายการที่ระบุไว้บนบรรจุภัณฑ์
- Assemble the Frame (if required): Some models may require minor assembly of the outer frame or support structure. Follow any included diagrams for connecting panels or supports.
- Insert Heating Module: Place the detachable heating module into its designated slot within the dryer unit. Ensure it is securely seated.
- เชื่อมต่อพลังงาน: Plug the power adapter into the dryer unit and then into a suitable power outlet.
- Prepare for Filament: Open the dryer chamber. If using a spool holder, ensure it is correctly positioned to allow the filament spool to rotate freely.
คำแนะนำการใช้งาน
Operating your filament dryer is essential for maintaining optimal filament quality. Here's how to use it:
- โหลดเส้นใย: Open the dryer's chamber. Place your filament spool onto the internal spool holder. Ensure the filament can unroll smoothly. The dryer accommodates various spool sizes (1kg, 2kg, 3kg, 5kg) and filament diameters (1.75mm, 2.85mm).
- Close Chamber: Securely close the dryer chamber to maintain a consistent internal environment.
- เปิดเครื่อง: Use the unit switch on the external controller to power on the device.
- ตั้งค่าอุณหภูมิ: The dryer offers a temperature control range of 40°C to 70°C. Use the controls on the unit switch to select your desired drying temperature. The 400W PTC hot air heater can reach 70°C within 5 minutes.
- ตั้งเวลาการอบแห้ง: Utilize the timer function to set the desired drying duration, ranging from 1 to 48 hours. The device features a power-off temperature memory function, retaining your last settings.
- ตรวจสอบความชื้น: The integrated hygrometer on the front panel displays the current humidity level inside the dryer, allowing you to monitor the drying process.
- การลดความชื้น: The dryer is equipped with a dehumidification flap. Ensure it is clear for proper moisture release.
- เริ่มการอบแห้ง: Once temperature and time are set, initiate the drying process.
- Remove Filament: After the set drying time, power off the unit and carefully remove the dried filament spool.
การซ่อมบำรุง
Regular maintenance ensures the longevity and optimal performance of your filament dryer.
- การทำความสะอาด: Periodically wipe down the exterior of the dryer with a soft, dry cloth. Ensure no dust or debris accumulates around the vents or the dehumidification flap.
- การทำความสะอาดภายใน: If necessary, gently clean the interior of the chamber when the device is unplugged and cool. Avoid using harsh chemicals or abrasive materials.
- Check Dehumidification Flap: Ensure the dehumidification flap is free from obstructions to allow proper moisture release during operation.
- การตรวจสอบสายเคเบิล: Regularly inspect the power cable and controller cable for any signs of wear or damage. If damage is found, discontinue use and contact support.
การแก้ไขปัญหา
This section addresses common issues you might encounter with your filament dryer.
- Filament Still Damp หลังจากการอบแห้ง:
- Ensure the chamber is fully closed during operation.
- Verify that the selected temperature and drying time are appropriate for the filament type. Some hygroscopic filaments (e.g., Nylon, PVA) may require longer drying times or higher temperatures.
- Check the ambient humidity. In very humid environments, the dryer may need to run longer. - เครื่องอบผ้าไม่ร้อน:
- Confirm the unit is properly plugged into a working power outlet.
- Check the unit switch and ensure it is powered on and the temperature is set above ambient.
- Inspect the power cable for any damage. - Inconsistent Print Quality After Drying:
- While the dryer significantly improves print quality, other factors like printer calibration, nozzle wear, or print settings can also affect results. Ensure your printer is well-maintained.
- Verify that the filament was dried for a sufficient duration. - Hygrometer Displaying Incorrect Readings:
- Ensure the dryer chamber is sealed. If the chamber is open, it will display ambient humidity.
- If persistent issues occur, contact customer support.
ข้อมูลจำเพาะ
Below are the technical specifications for the Creality Multi-kilo Filament Dryer:
| คุณสมบัติ | ข้อมูลจำเพาะ |
|---|---|
| ชื่อสินค้า | Creality Multi-kilo Filament Dryer |
| ขนาดสินค้า | 415 × 250 × 439 มม. |
| ขนาดบรรจุภัณฑ์ | 442 × 270 × 245 มม. |
| น้ำหนักรวมของผลิตภัณฑ์ | 4.6 กก. |
| อินพุต Voltage | UK/GB/EUR/AUS/BRA/CHL/ARG: 220-240V~50/60Hz US/JPN: 100-120V~50/60Hz |
| กำลังไฟที่กำหนด | 300วัตต์ |
| ช่วงการควบคุมอุณหภูมิ | 40°C - 70°C |
| ระยะเวลาในการให้ความร้อน | 1 - 48 ชั่วโมง |
| Applicable Spool Diameter | ≤ 330 มม |
| Applicable Spool Width | ≤ 160 มม |
| เส้นผ่านศูนย์กลางเส้นใย | 1.75มม. / 2.85มม. |
เคล็ดลับสำหรับผู้ใช้
- Pre-Drying for Best Results: Always pre-dry new filament spools, especially hygroscopic materials, even if they appear dry. This proactive step can significantly improve print quality and reduce common printing failures.
- ตรวจสอบความชื้น: Pay attention to the hygrometer reading. While the dryer maintains temperature, the humidity level indicates the effectiveness of moisture removal. Lower humidity is generally better for drying.
- Utilize Modular Heating: Experiment with the detachable heating module. It can be used to pre-heat your printer's enclosure, which can be beneficial for printing with certain materials that require a warm environment.
- Optimal Drying Times: Different filament types absorb moisture at different rates. PLA and PETG might need 4-6 hours, while Nylon or PVA could require 12-24 hours or more. Adjust drying times based on filament type and ambient humidity.
- Store Dried Filament: For best results, store dried filament in an airtight container with desiccant packs immediately after drying to prevent re-absorption of moisture.
การรับประกันและการสนับสนุน
For detailed warranty information, please refer to the official Creality website or contact the authorized seller from whom you purchased the product. Warranty terms typically cover manufacturing defects and may vary by region.
For technical support, troubleshooting assistance beyond this manual, or spare parts, please contact Creality's official customer service channels. You can usually find contact information on the Creality official website or through the retailer's support page.
