คู่มือผู้ใช้หูฟังและไมโครโฟนแบบ 2-in-1 สำหรับหมวกกันน็อค FreedConn

1. บทนำ

Thank you for choosing the FreedConn 2-in-1 Helmet Headphone Microphone. This accessory is designed to enhance your communication experience while riding, providing clear audio and voice transmission for your FreedConn Bluetooth intercom system. This manual provides essential information for proper installation, operation, and maintenance of your new headphone microphone.

Figure 1: FreedConn 2-in-1 Helmet Headphone Microphone Kit Overview

2. เนื้อหาบรรจุภัณฑ์

แพ็คเกจของคุณควรมีรายการต่อไปนี้:

• 1 x FreedConn 2-in-1 Headphone Microphone Assembly (with integrated hard and soft cable microphones)

Note: The Bluetooth intercom unit and helmet are NOT included with this product.

3. ความเข้ากันได้

This earphone microphone is designed for use with specific FreedConn Bluetooth intercom models. It is crucial to verify the plug type of your intercom unit before installation.

3.1 Plug Types

Two types of plugs are available for this earphone microphone:

• 5-Pin (New Plug): Compatible with newer FreedConn intercom models.
• 8-Pin (Old Plug): Compatible with older FreedConn intercom models.

Figure 2: Comparison of 5-pin (New) and 8-pin (Old) Intercom Plugs. Please match the plug type to your intercom unit.

3.2 Compatible FreedConn Intercom Models

This earphone microphone is generally compatible with FreedConn T-COM, VB, SC, COLO, RC, T-MAX, and T-REX series intercoms, provided the correct plug type is selected.

Important: This earphone is NOT suitable for FreedConn BT-S2 or BT-S3 models. If you are unsure about compatibility, please consult your intercom's manual or contact the seller for assistance before purchasing.

4. การตั้งค่าและการติดตั้ง

Follow these steps to install the headphone microphone into your helmet and connect it to your FreedConn intercom unit.

4.1 Identify Components

Figure 3: FreedConn Earphone Microphone Component Diagram, showing Headset Plug, Microphone, and Ear Speakers.

4.2 Choose Microphone Type

The kit includes both a hard cable microphone and a soft cable microphone, which are detachable and interchangeable. Select the microphone type best suited for your helmet:

• Hard Cable Microphone: Often preferred for open-face or modular helmets where a rigid boom is beneficial.
• Soft Cable Microphone: Ideal for full-face helmets, allowing for flexible placement inside the helmet padding.

Figure 4: The detachable hard and soft cable microphones can be replaced at any time, suitable for all helmets, such as full-face, open-face, and half-cover helmets.

Figure 5: The earphone kit features both hard and soft cable microphone options integrated into one system, allowing for versatile installation in different helmet types.

4.3 การติดตั้งลำโพง

1. Locate suitable positions inside your helmet for the ear speakers. They should be placed directly over your ears for optimal sound.
2. Use the adhesive backing (if provided) or Velcro pads to secure the speakers firmly within the helmet's ear pockets. Ensure they do not cause discomfort.
3. Route the speaker wires neatly under the helmet padding to avoid interference or damage.

รูปที่ 6: อดีตample of soft earphone installation for a full-face helmet.

4.4 Microphone Installation

1. Attach the chosen microphone (hard or soft cable) to the main earphone cable assembly.
2. Position the microphone close to your mouth, ideally within 1-2 cm, to ensure clear voice pickup.
3. Secure the microphone using its adhesive backing or clip, routing the cable discreetly along the helmet's interior.

4.5 Connecting to Intercom

1. Carefully insert the headset plug (5-pin or 8-pin) into the corresponding port on your FreedConn Bluetooth intercom unit. Ensure the plug is fully seated.
2. Mount your intercom unit securely to the side of your helmet using its dedicated mounting bracket (intercom mounting bracket not included).

5. คู่มือการใช้งาน

Once installed, the headphone microphone functions as the audio input and output for your FreedConn Bluetooth intercom. Refer to your specific FreedConn intercom's user manual for detailed instructions on pairing, making calls, listening to music, and using intercom features.

• เอาต์พุตเสียง: Sound from your intercom (e.g., music, GPS, communication) will be played through the helmet speakers.
• อินพุตเสียง: Your voice will be picked up by the microphone for intercom communication or phone calls.

6. การบำรุงรักษา

Proper care will extend the life of your headphone microphone.

• การทำความสะอาด: Gently wipe the speakers and microphone foam with a soft, dry cloth. Avoid using harsh chemicals or excessive moisture.
• พื้นที่จัดเก็บ: When not in use, store the headphone microphone in a dry, cool place, away from direct sunlight and extreme temperatures.
• การดูแลสายเคเบิล: Avoid sharp bends or excessive pulling on the cables to prevent internal damage.

7 การแก้ไขปัญหา

หากคุณพบปัญหา ให้ลองวิธีแก้ไขปัญหาต่อไปนี้:

หากปัญหายังคงอยู่ โปรดติดต่อฝ่ายสนับสนุนลูกค้า

8. ข้อมูลจำเพาะ

9. เคล็ดลับผู้ใช้

• Verify Plug Type: Always double-check the plug type of your existing FreedConn intercom unit (5-pin or 8-pin) before purchasing or installing to ensure compatibility.
• ตำแหน่งการวางไมโครโฟน: For the best audio clarity, ensure the microphone is positioned as close to your mouth as possible without obstructing your vision or comfort.
• การจัดการสายเคเบิล: Route all cables carefully within the helmet padding to prevent pinching, damage, or discomfort during use.

10. คำถามที่พบบ่อย (FAQ)

Q: Is this earphone compatible with my FreedConn intercom model X?

A: Please refer to the 'Compatibility' section (Section 3) and carefully check the plug type (5-pin or 8-pin) required by your specific intercom model. This earphone is not compatible with BT-S2/BT-S3 models.

11. การรับประกันและการสนับสนุน

ผลิตภัณฑ์นี้มาพร้อมกับ เปลี่ยนสินค้าฟรีภายใน 365 วัน guarantee. For any warranty claims, technical support, or further inquiries, please contact the seller directly through your purchase platform.