LINGBAO K98

คู่มือการใช้งานคีย์บอร์ดเชิงกล LINGBAO K98

รุ่น : K98

LINGBAO K98 Mechanical Keyboard with 3 Modes, Hot-Swap, and 10000mAh Battery

The LINGBAO K98 is a versatile mechanical keyboard featuring three connection modes, hot-swappable switches, and a large battery capacity for extended use.

การแนะนำ

Thank you for choosing the LINGBAO K98 Mechanical Keyboard. This manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your new keyboard. Please read this manual thoroughly to ensure optimal performance and longevity of your device.

วิดีโอ: จบแล้วview of LINGBAO K98 features including connectivity, RGB lighting, and hot-swappable switches.

การตั้งค่า

The LINGBAO K98 keyboard offers three connection modes: Wired (USB-C), 2.4G Wireless, and Bluetooth 5.0. Follow the steps below to set up your preferred connection.

1. การเลือกโหมดการเชื่อมต่อ

Locate the mode switch on the side of the keyboard. This switch allows you to select between 2.4G wireless, USB wired, and Bluetooth modes.

ด้านคีย์บอร์ด view showing 2.4G, USB, BT, USB-C switch and port

ภาพ: ด้านข้าง view of the LINGBAO K98 keyboard, highlighting the mode switch for 2.4G, USB, and Bluetooth connections, along with the USB-C port.

2. การเชื่อมต่อแบบใช้สาย

  1. Turn the mode switch to the "USB" position.
  2. Connect the keyboard to your computer using the provided Type-C cable.
  3. The keyboard will automatically enter wired mode and begin charging.

3. การเชื่อมต่อไร้สาย 2.4G

  1. Locate the 2.4G USB receiver, typically stored magnetically within the keyboard chassis.
  2. Close-up of USB receiver hidden storage

    Image: Close-up of the magnetic storage compartment for the 2.4G USB receiver.

  3. เสียบตัวรับสัญญาณ USB เข้ากับพอร์ต USB ที่พร้อมใช้งานบนคอมพิวเตอร์ของคุณ
  4. Turn the mode switch on the keyboard to the "2.4G" position.
  5. Press the key combination "FN" + "~" for about 3 seconds to initiate pairing. The cyan light will flash.
  6. Once connected, the cyan light will remain on for 2 seconds, indicating a successful connection.

4. การเชื่อมต่อบลูทู ธ

  1. Turn the mode switch on the keyboard to the "BT" position.
  2. Long press the key combination "FN" + "1!" / "2@" / "3#" for about 3 seconds to enter pairing mode. The blue light will flash.
  3. On your device (Laptop, iPad, etc.), enable Bluetooth and search for available devices.
  4. Select "[K98S.0]" or "[K98S.0]" (depending on the specific model variant) from the list to link.
  5. The keyboard supports connecting to up to three Bluetooth devices. Use FN+1!, FN+2@, FN+3# to switch between paired devices.

5. การสลับระบบปฏิบัติการ

แป้นพิมพ์รองรับระบบปฏิบัติการต่างๆ ใช้การกดปุ่มต่อไปนี้เพื่อสลับโหมด:

  • FN + ถาม: ระบบแอนดรอยด์
  • เอฟเอ็น + ว: ระบบ Windows
  • เอฟเอ็น + อี: ระบบ MAC
Diagram showing Wired mode, Bluetooth connection, 2.4G connection instructions, and Operating System Switch key combinations

Image: Detailed instructions for wired, Bluetooth, and 2.4G connections, along with operating system switching commands.

คำแนะนำการใช้งาน

1. การควบคุมไฟแบ็คไลท์ RGB

The LINGBAO K98 features a full RGB backlight with 15 switchable effects. You can customize these effects using key combinations or the dedicated software.

  • ฟน + \|: Toggle between 15 RGB backlight effects.
  • FN+แท็บ: ปรับความสว่างของแบ็คไลท์
  • FN + ↑ / ↓: Adjust light color or speed (depending on the effect).
Diagram showing 15 RGB backlight effects and FN key combinations for control

Image: Visual representation of various RGB backlight effects and the corresponding FN key combinations.

2. Side Lamp การปรับเอฟเฟกต์

The keyboard also features side lighting that can be adjusted:

  • FN + Right Shift: Switch side light mode (streamer/neon/always on/breathing/off light).
  • FN + Right Ctr: สวิตซ์ไซด์ลamp efficiency speed.
  • FN + ->: Toggle side lamp ความสว่าง.
  • FN + /?: Toggle side lamp color (breathing and constant light modes).
Diagram showing Ambiance strip adjustment key combinations

Image: Instructions for adjusting the keyboard's side lighting effects.

3. ปุ่มลัดมัลติมีเดีย

The LINGBAO K98 includes built-in FN combination function keys for multimedia shortcuts. The following functions are examples for the Windows system:

  • FN+F1: หน้าแรก
  • FN+F2: เมล
  • FN+F3: หน้าต่างการแปลง
  • FN+F4: เปิด Explorer
  • FN+F5: Backlight Brightness -
  • FN+F6: ความสว่างของแบ็คไลท์ +
  • FN+F7: เพลงก่อนหน้า
  • FN+F8: เล่น/หยุดชั่วคราว
  • FN+F9: เพลงถัดไป
  • FN+F10: ปิดเสียง
  • FN+F11: ปริมาณ -
  • FN+F12: เล่ม +
Diagram showing FN combination function keys for multimedia shortcuts

Image: Visual guide to the FN key combinations for various multimedia functions.

4. สวิตช์แบบ Hot-Swappable

The LINGBAO K98 features full key hot-swappable sockets, allowing for convenient replacement of shaft bodies without soldering. This feature enables you to customize your typing feel at any time.

Close-up of hot-swappable switches with keycaps and switch puller

Image: Illustration of the hot-swappable switch design, showing switches being removed and replaced.

The keyboard is compatible with three-foot/five-foot shaft bodies, suitable for most mechanical shaft bodies on the market.

Diagram showing specifications for Flower field axis, Red Rabbit Axis Pro, and Red rabbit axis switches

Image: Detailed specifications for the three available switch types: Flower field axis, Red Rabbit Axis Pro, and Red rabbit axis, including trigger pressure, bottom pressure, mechanical life, trigger stroke, and total stroke.

5. Macro Programmable Software

The LINGBAO K98 supports macro programming software. This software allows you to:

  • Set various keyboard key functions.
  • Record macros for complex command sequences.
  • Personalize function keys.

The onboard flash memory unit saves your configurations, so they remain active even when the keyboard is offline or connected to a different device.

การซ่อมบำรุง

1. การทำความสะอาด

  • คีย์แคป: The PBT keycaps are durable and resistant to wear. To clean, gently remove keycaps using a keycap puller (if provided) and wipe them with a soft, damp cloth. For deeper cleaning, they can be washed with mild soap and water, ensuring they are completely dry before reattaching.
  • ตัวคีย์บอร์ด: Use a soft, lint-free cloth to wipe the surface of the keyboard. For hard-to-reach areas, use compressed air to remove dust and debris.
  • สวิตช์: If switches are removed for cleaning, use compressed air to clear any dust from the switch sockets.

2. การดูแลแบตเตอรี่

The keyboard is equipped with a built-in 5000 mAh or 10000 mAh battery. To ensure optimal battery life:

  • Charge the keyboard using the provided Type-C cable when in wired mode or when the battery indicator shows low power.
  • หลีกเลี่ยงการปล่อยแบตเตอรี่จนหมดบ่อยครั้ง
  • หากจะเก็บคีย์บอร์ดไว้เป็นเวลานาน ควรชาร์จแบตเตอรี่ให้ได้ประมาณ 50-70% ก่อนเก็บรักษา

3. Gasket Structure Care

The keyboard's gasket-mounted design with 5-layer silicone pads and noise reduction cotton contributes to its sound and feel. No specific maintenance is required for these internal components, but avoid exposing the keyboard to excessive moisture or extreme temperatures.

Diagram illustrating the internal gasket structure with layers of sound dampening materials

Image: Cross-section diagram of the K98's gasket structure, showing PO sandwich cotton, IXPE shaft underpad, PET shaft lower pad, Cotton, and Silicone base pad.

การแก้ไขปัญหา

1. แป้นพิมพ์ไม่ตอบสนอง

  • โหมดสาย: Ensure the Type-C cable is securely connected to both the keyboard and the computer. Check if the mode switch is set to "USB".
  • โหมดไร้สาย 2.4G:
    • Verify the USB receiver is properly inserted into a USB port.
    • Ensure the mode switch is set to "2.4G".
    • Re-pair the keyboard by pressing "FN" + "~" for 3 seconds.
    • ตรวจสอบระดับแบตเตอรี่
  • โหมดบลูทู ธ :
    • Ensure Bluetooth is enabled on your device and the keyboard's mode switch is set to "BT".
    • Re-enter pairing mode by long-pressing "FN" + "1!" / "2@" / "3#" for 3 seconds and re-connect from your device's Bluetooth settings.
    • ตรวจสอบระดับแบตเตอรี่

2. ปัญหาเกี่ยวกับแสงไฟด้านหลัง

  • If the backlight is off, press "FN + \|" to cycle through modes or "FN + F6" to increase brightness.
  • If colors are not displaying correctly, try resetting the backlight settings via the macro programmable software or cycling through modes.

3. ปุ่มไม่ทำงานหรือพิมพ์ซ้ำ

  • นี่อาจบ่งชี้ว่าสวิตช์มีปัญหา ใช้คุณสมบัติการเปลี่ยนสวิตช์ขณะทำงาน (hot-swappable) เพื่อเปลี่ยนสวิตช์ที่มีปัญหา
  • ตรวจสอบให้แน่ใจว่าปุ่มกดติดตั้งเข้ากับสวิตช์อย่างถูกต้อง
  • Clean under the keycaps and around the switches to remove any debris.

4. อายุการใช้งานแบตเตอรี่สั้น

  • ตรวจสอบให้แน่ใจว่าแป้นพิมพ์มีประจุไฟเต็มแล้ว
  • Reduce backlight brightness or turn off RGB lighting when not needed to conserve battery.
  • Consider using wired mode for extended periods to charge the battery.

ข้อมูลจำเพาะ

คุณสมบัติ รายละเอียด
ชื่อยี่ห้อ หลิงเป่า
รุ่นสินค้า เค98
ความจุของแบตเตอรี่ 5000 mAh / 10000 mAh (optional)
โหมดการเชื่อมต่อ บลูทูธ 5.0, ไร้สาย 2.4G, แบบมีสาย Type-C
แสงไฟแบ็คไลท์ RGB Backlit (MULTICOLOR)
ความเข้ากันได้ของระบบปฏิบัติการ WIN XP/7/8/10, Android, IOS, MAC
วัสดุปุ่มกด พลาสติก PBT
ความสูงของปุ่มกด Cherry/SSA Profile
สวิตช์แบบ Hot Swap Yes (compatible with 3-foot/5-foot shaft bodies)
แป้นพิมพ์มาตรฐาน 101 คีย์
แอปพลิเคชัน เดสก์ท็อป, แล็ปท็อป, ตัวเลข, แท็บเล็ต
ภาษา ภาษาอังกฤษ
การรับรอง CE
ขนาดบรรจุภัณฑ์ (ยาว x กว้าง x สูง) 45 ซม. x 20 ซม. x 10 ซม.
น้ำหนักแพ็คเกจ 1.8 กก.

ข้อมูลจำเพาะของสวิตช์:

ประเภทสวิตซ์ แรงกดไกปืน แรงดันด้านล่าง ชีวิตเครื่องจักร จังหวะการดีดไก โรคหลอดเลือดสมองทั้งหมด
Flower field axis (Linear) 33 ± 3 ก.ฟ 45 ± 3 ก.ฟ ประมาณ 60 ล้านครั้ง 1.5 ± 0.3 มม 3.8 ± 0.3 มม
Red Rabbit Axis Pro (Linear) 33 ± 3 ก.ฟ 55 ± 3 ก.ฟ ประมาณ 60 ล้านครั้ง 1.8 ± 0.3 มม 3.3 ± 0.3 มม
Red rabbit axis (Linear) 32 ± 3 ก.ฟ 55 ± 3 ก.ฟ ประมาณ 60 ล้านครั้ง 1.8 ± 0.3 มม 3.3 ± 0.3 มม

เคล็ดลับสำหรับผู้ใช้

  • รองรับภาษา: While the keyboard's default language is English, the operating system switch (FN+Q/W/E) allows compatibility with various systems. For specific language layouts or characters like 'Ñ' in Spanish, you may need to configure your operating system's language settings. The keyboard itself is a hardware input device, and software settings on your computer will determine the input language.
  • การปรับแต่ง: รับล่วงหน้าtage of the hot-swappable switches to experiment with different switch types and find your preferred typing feel. The macro programmable software offers extensive customization for key functions and RGB lighting, allowing you to tailor the keyboard to your specific workflow or gaming style.
  • การจัดการแบตเตอรี่: For optimal wireless performance, keep an eye on the battery level. If you primarily use the keyboard at a desk, consider using it in wired mode occasionally to keep the battery topped up.

การรับประกันและการสนับสนุน

For warranty information, technical support, or any product-related inquiries, please contact the seller or the LEOBOG Official Store directly. Keep your purchase receipt as proof of purchase for warranty claims.

LEOBOG Official Store: https://m.aliexpress.com/store/storeHome.htm?sellerAdminSeq=243576196


สาธิตคุณสมบัติและทดสอบเสียงของคีย์บอร์ดเชิงกลไร้สายบลูทูธ Lingbao K98

สาธิตคุณสมบัติและทดสอบเสียงของคีย์บอร์ดเชิงกลไร้สายบลูทูธ Lingbao K98

0:40 • 720×720 • สาธิตฟีเจอร์
LINGBAO K98 คีย์บอร์ดเชิงกล: 3 โหมด, สลับได้, คีย์บอร์ด RGB สำหรับการเล่นเกมและการทำงาน

LINGBAO K98 คีย์บอร์ดเชิงกล: 3 โหมด, สลับได้, คีย์บอร์ด RGB สำหรับการเล่นเกมและการทำงาน

0:37 • 1280×720 • โปรโมชัน

เอกสารที่เกี่ยวข้อง - เค98

พรีview คู่มือการใช้งานและคำแนะนำสำหรับคีย์บอร์ดเชิงกลไร้สายแบบปรับแต่งได้ MIKIBY K98
ค้นพบคีย์บอร์ดเชิงกลไร้สายแบบมีปุ่มหมุนปรับแต่งได้ MIKIBY K98 ด้วยคู่มือผู้ใช้ฉบับสมบูรณ์นี้ เรียนรู้เกี่ยวกับการเชื่อมต่อสามโหมด (บลูทูธ, 2.4G, แบบมีสาย Type-C), ปุ่มหมุนที่ปรับแต่งได้, สวิตช์แบบถอดเปลี่ยนได้ขณะใช้งาน, ไฟแบ็คไลท์ RGB และตัวเลือกการปรับแต่งซอฟต์แวร์สำหรับ Windows และ macOS รวมถึงการตั้งค่า การใช้งาน และการแก้ไขปัญหา
พรีview คู่มือผู้ใช้และคำแนะนำคีย์บอร์ดเชิงกล Kzzi K98
คู่มือครอบคลุมสำหรับคีย์บอร์ดเชิงกล Kzzi K98 ครอบคลุมการตั้งค่า การเชื่อมต่อ (แบบมีสาย 2.4G บลูทูธ) การปรับแต่งไฟแบ็คไลท์ ฟังก์ชันมัลติมีเดียสำหรับ Windows และ macOS และข้อมูลการรับประกัน
พรีview คู่มือผู้ใช้คีย์บอร์ดเชิงกล Kzzi K98 - คุณสมบัติ การเชื่อมต่อ และการตั้งค่า
คู่มือผู้ใช้ฉบับสมบูรณ์สำหรับคีย์บอร์ดแมคคานิค Kzzi K98 เรียนรู้เกี่ยวกับคุณสมบัติ ตัวเลือกการเชื่อมต่อแบบมีสายและไร้สาย (บลูทูธ 2.4GHz) ฟังก์ชันหลัก ข้อมูลจำเพาะ และการแก้ไขปัญหา
พรีview กล้องเล็ง K98 Sniper (หมายเลข 1001) - กล้องเล็ง Red Star Mountain ZF39
สำรวจกล้องเล็ง Red Star Mountain K98 Sniper Scope Reproduction (หมายเลข 1001) ซึ่งเป็นแบบจำลองที่เหมือนจริงของกล้องเล็ง ZF39 รุ่นดั้งเดิม เอกสารนี้ให้รายละเอียดเกี่ยวกับประวัติ ข้อมูลจำเพาะ ชิ้นส่วน ตัวเลือกการติดตั้ง และขั้นตอนการปรับแต่งเพื่อการใช้งานที่เหมาะสมที่สุด
พรีview คู่มือผู้ใช้และคำแนะนำปืนอัดลม DIANA Mauser K98 PCP
คู่มือผู้ใช้ฉบับสมบูรณ์สำหรับปืนลมอัดลม DIANA Mauser K98 PCP ครอบคลุมคำแนะนำด้านความปลอดภัย ข้อมูลจำเพาะทางเทคนิค การใช้งาน การใช้งาน การบำรุงรักษา และการแก้ไขปัญหา เรียนรู้วิธีการใช้งานและดูแลรักษาปืนลมอัดลม K98 ของคุณอย่างปลอดภัย
พรีview การสร้างปืนไรเฟิล K98: คู่มือปืน Thames Valley
คู่มือโดยละเอียดจาก Thames Valley Guns เกี่ยวกับวิธีการสร้างปืนไรเฟิลจำลอง K98 ครอบคลุมถึงการเลือกปืนไรเฟิลรุ่นบริจาค การติดตั้งกล้องเล็ง ตัวเลือกไกปืน การจัดวาง และการตกแต่งเพื่อความแม่นยำที่เพิ่มขึ้น