1. สินค้าหมดview
The YIHUA 982D-I PRO is a precision tweezers soldering iron station designed for intricate micro-soldering and desoldering applications. It features advanced functionalities such as automatic calibration, customizable temperature presets, and intelligent sleep modes to enhance efficiency and prolong tool life.
2. ข้อมูลด้านความปลอดภัย
- Always ensure the soldering station is placed on a stable, heat-resistant surface.
- ใช้ในบริเวณที่มีอากาศถ่ายเทได้ดีเพื่อหลีกเลี่ยงการสูดดมควันบัดกรี
- สวมใส่อุปกรณ์ป้องกันส่วนบุคคลที่เหมาะสม รวมถึงแว่นตานิรภัย
- Do not touch the soldering iron tip or tweezers when hot.
- Unplug the unit from the power source before cleaning or maintenance.
- เก็บให้พ้นจากมือเด็ก
3. คู่มือการติดตั้ง
This section provides instructions for the initial setup of your YIHUA 982D-I PRO soldering station.
3.1 การแกะกล่องและการระบุชิ้นส่วน
นำส่วนประกอบทั้งหมดออกจากบรรจุภัณฑ์อย่างระมัดระวัง ตรวจสอบว่ามีส่วนประกอบทั้งหมดครบถ้วน:
- YIHUA 982D-I PRO Main Unit
- C716C Tweezers Soldering Handpiece (or C716E Soldering Iron Handle, depending on package)
- Soldering Iron Holder with cleaning sponge
- Solder Wire Spool Holder
- สายไฟ
- Assorted Soldering Tips
3.2 การประกอบเบื้องต้น
- วางตัวเครื่องหลักบนพื้นผิวที่มั่นคงและเรียบ
- Attach the solder wire spool holder to the designated slot on the top of the unit.
- Insert the soldering iron holder into its slot on the side of the unit. Ensure the cleaning sponge is in place.
- Connect the desired soldering handpiece (tweezers or iron) to the appropriate port on the front of the unit.
- Connect the power cord to the unit and then to a suitable power outlet.
4. คู่มือการใช้งาน
The YIHUA 982D-I PRO offers a range of features for precise and efficient soldering.
4.1 เปิด/ปิดเครื่อง
To power on the unit, press the main power switch located on the rear of the station. The full-color LCD display will illuminate, showing the YIHUA logo during startup, then displaying the current and set temperatures.
4.2 การปรับอุณหภูมิ
The temperature can be adjusted from 90°C to 450°C (194°F to 842°F) using the rotary knob on the front panel. Turn the knob clockwise to increase the temperature and counter-clockwise to decrease it.
4.3 Customizable Temperature Presets
The station features four customizable temperature preset channels (CH1, CH2, CH3, CH4). These allow you to quickly switch between frequently used temperature settings.
- CH1 (300°C/572°F): Recommended for Tinning & Cleaning.
- CH2 (350°C/662°F): Recommended for General Soldering.
- CH3 (380°C/716°F): Recommended for Tinning & Cleaning.
- CH4 (400°C/752°F): Recommended for Ground Planes.
To set a preset, adjust the temperature to your desired value, then press and hold the corresponding channel button (CH1-CH4) until the setting is saved.
4.4 Dual Tweezers Operation
The C716C tweezers handpiece allows for simultaneous heating of two points, making it ideal for desoldering small SMD components.
4.5 Sleep Mode and Automatic Shutdown
The station features intelligent sleep and automatic shutdown functions to conserve energy and extend the lifespan of the heating elements.
- โหมดสลีป: When the handpiece is placed in its holder, the station enters a low-wear idling sleep mode, reducing the tip temperature to 200°C (392°F). This mode is adjustable from 1 to 10 minutes.
- ปิดเครื่องอัตโนมัติ: If the handpiece remains in sleep mode for an extended period (configurable), the unit will automatically shut down.
4.6 การป้องกันด้วยรหัสผ่าน
The station can be password-locked to prevent unauthorized changes to settings. Refer to the built-in digital manual for instructions on configuring and using the password lock.
4.7 Buzzer and Temperature Unit Settings
The unit allows you to toggle the buzzer sound ON/OFF and switch between Celsius (°C) and Fahrenheit (°F) temperature units. These settings can be accessed through the menu on the display.
5. การบำรุงรักษา
Proper maintenance ensures the longevity and optimal performance of your soldering station.
5.1 Tip Cleaning and Replacement
Regularly clean the soldering tips using the provided sponge or brass wool. The integrated holder features a groove for easy, tool-free tip removal and installation.
5.2 การทำความสะอาดทั่วไป
Wipe the main unit and handpieces with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the unit is unplugged and cooled down before cleaning.
6 การแก้ไขปัญหา
This section addresses common issues you might encounter with your soldering station.
6.1 การปรับเทียบอุณหภูมิอัตโนมัติ
If you suspect temperature inaccuracies, perform an automatic temperature calibration. This feature ensures consistent temperature accuracy without the need for external thermometers.
Calibration Steps (refer to built-in digital manual for detailed visual guide):
- Adjust the temperature to 250°C (482°F) or higher.
- Pick up the handpiece and allow it to stabilize.
- Press and hold the temperature calibration button for approximately 2 seconds.
- Turn the knob to select Tool A/B calibration.
- Place the soldering iron tip in full contact with the thermocouple in the calibration port.
- Press the knob to exit once calibration is successful.
6.2 Digital Manual (Built-in)
The unit includes a built-in digital manual accessible via the menu. This manual provides detailed instructions and diagrams for various functions, including setup, calibration, and password configuration.
7. ข้อมูลจำเพาะ
| คุณลักษณะ | ค่า |
|---|---|
| ชื่อยี่ห้อ | ยี่ฮัว |
| หมายเลขรุ่น | 982D-I pro |
| กำลังไฟที่กำหนด | 90วัตต์ |
| เล่มที่tage | 110-127V หรือ 220-240VDC |
| น้ำหนัก | 1.55kg. ±10% |
| ช่วงอุณหภูมิ | 194~842°F / 90~450°C |
| อุณหภูมิในการทำงาน | 32~104℉/ 0~40℃ |
| อุณหภูมิในการจัดเก็บ | -4~176℉/ -20~80℃ |
| Size of station | กว้าง 177 มม. * ลึก 152 มม. * สูง 110 มม. ±5 มม. |
| จอแสดงอุณหภูมิ | จอแอลซีดีนิกซี่ |
| การรับรอง | CE, FCC, UL, WEEE |
| ใช้สำหรับ | SMD components that are extremely small. (e.g., resistors, capacitors, inductors, LEDs, fuses and more.) |
8. การรับประกันและการสนับสนุน
YIHUA provides comprehensive warranty service for its products. Please consult customer service for detailed information regarding your specific warranty terms.
8.1 Warranty Service Conditions
Warranty service is typically provided for the following cases:
- ไม่สามารถเปิดเครื่องได้
- ฟังก์ชั่นนี้ไม่สามารถใช้งานได้
- ปืนลมหรือหัวแร้งบัดกรีทำงานผิดปกติ
- The heating element of the air gun/soldering iron is damaged.
- หม้อแปลงหรือตัวยึดฟิวส์ชำรุด
Please note that warranty claims typically require the item to be free from disassembly or unauthorized repair. For any issues, it is recommended to consult customer service for details.
9. เคล็ดลับผู้ใช้
- This unit is specifically designed for small micro components and smaller circuit boards (e.g., smartphones, laptops, drones, network routers). It is NOT suitable for large circuits.
- The soldering iron handle and the tweezers handpiece cannot be used simultaneously. Ensure only one is connected and active at a time.
- When performing automatic temperature calibration, ensure the soldering iron tip is in full contact with the thermocouple for accurate results.
- Utilize the adjustable standby mode timer (1-10 minutes) to optimize energy saving and reduce wear on your soldering tips while ensuring rapid reheat when you resume work.
- รับล่วงหน้าtage of the four customizable temperature presets to quickly switch between common soldering tasks without manual temperature adjustments.
