คู่มือการใช้งาน+

MJJC 4 Zone Dimming Kit RS1/V1

User Manual: 4 Zone Dimming V1 LED Dimmer & RS1 Wireless Remote Control

Model: 4 Zone Dimming Kit RS1/V1 | Brand: MJJC

1. บทนำ

This manual provides detailed instructions for the MJJC 4 Zone Dimming V1 LED Dimmer and RS1 Wireless Remote Control system. This system is designed for controlling single color LED strips, offering smooth dimming and multi-zone control capabilities. Please read this manual thoroughly before installation and operation to ensure proper use and optimal performance.

MJJC V1 LED Dimmer and RS1 Wireless Remote Control Kit

Image 1: MJJC V1 LED Dimmer and RS1 Wireless Remote Control Kit

2. คุณสมบัติ

V1 LED Dimmer

  • Used to control single color LED strips.
  • Offers 4096 levels of 0-100% smooth dimming without visible steps.
  • Can connect with an external push switch for on/off and dimming functions.
  • Adjustable light on/off fade time (3 seconds selectable).
  • Includes over-heat, over-load, and short circuit protection with automatic recovery.

RS1 2.4G RF Remote Control

  • 4-zone dimming remote control for independent or synchronized control.
  • Features 13 keys and a touch color wheel for smooth dimming adjustments.
  • Utilizes 2.4G RF control for reliable wireless communication.
  • Comes with a remote holder for convenient storage.

3. ข้อมูลจำเพาะ

Specifications table for Single Color LED Controller V1

Image 2: Specifications for V1 LED Dimmer

หมวดหมู่พารามิเตอร์ค่า
อินพุตและเอาต์พุตอินพุต Voltage5-36VDC
กระแสไฟเข้า8.5เอ
ปริมาณการส่งออกtage5-36VDC
กระแสไฟขาออก1CH,8A
กำลังขับ40W/96W/192W/288W (for 5V/12V/24V/36V respectively)
ประเภทเอาท์พุตคงที่Voltage
ข้อมูลการหรี่แสงสัญญาณอินพุตRF 2.4GHz + กด Dim
ระยะควบคุม30ม. (พื้นที่ไร้สิ่งกีดขวาง)
การหรี่แสงระดับสีเทา4096 (2^12) ระดับ
ช่วงหรี่แสง0-100%
เส้นโค้งลดแสงลอการิทึม
ความถี่ PWM2000Hz (ค่าเริ่มต้น)
สิ่งแวดล้อมอุณหภูมิการทำงานตา: -30 °C ~ +55 °C
อุณหภูมิเคส (สูงสุด)Tc: +85°ซ
ระดับการป้องกันน้ำและฝุ่น (IP)IP20
ทางกายภาพV1 Dimmer SizeL114 x W38 x H26 มม
V1 Dimmer Gross Weight0.052กก.
RS1 Remote Size155มม. x 43มม. x 17.5มม.
Dimension diagram for RS1 Remote Control and V1 LED Dimmer

Image 3: Dimensions of RS1 Remote Control and V1 LED Dimmer

4. เนื้อหาบรรจุภัณฑ์

The contents of your package depend on the specific kit selected at purchase. Please refer to the SKU image of your order for exact details. For exampเลอ:

  • V1 เท่านั้น: 1 piece V1 dimmer.
  • RS1 and 1pcs V1 KIT: 1 piece RS1 remote and 1 piece V1 dimmer.
  • RS1 and 2pcs V1 KIT: 1 piece RS1 remote and 2 pieces V1 dimmers.
  • RS1 and 3pcs V1 KIT: 1 piece RS1 remote and 3 pieces V1 dimmers.
  • RS1 and 4pcs V1 KIT: 1 piece RS1 remote and 4 pieces V1 dimmers.

Note: For shipping safety, batteries for the RS1 remote control are NOT included in the package. You will need 2x AAA batteries.

Image showing a single V1 dimmer unit

Image 4: A single V1 Dimmer unit. Multiple V1 dimmers can be controlled by one RS1 Remote and set into the same zone.

5. การติดตั้ง

5.1 แผนผังการเดินสายไฟ

The V1 LED Dimmer connects between your constant voltage power supply and the single color LED strip. An optional push switch can be wired to the V1 dimmer for local control.

Wiring Diagram for V1 LED Dimmer with Push Switch and Power Supply

Image 5: Basic Wiring Diagram for V1 LED Dimmer

Push Switch Control diagram for V1 Dimmer

Image 6: Detailed Push Switch Connection to V1 Dimmer

Wiring Diagram for multiple V1 LED Dimmers with Push Switch and Power Supply

Image 7: Wiring Diagram for multiple V1 LED Dimmers controlled by one RS1 Remote and an optional Push Switch.

5.2 ข้อควรระวังในการติดตั้ง

  • การซ้อน: Do not stack products. Maintain a distance of at least 20cm between units to ensure proper heat dissipation and extend product lifespan.
  • Power Supply Proximity: Avoid installing the product close to switching power supplies. Maintain a minimum interval of 20cm to prevent radiation interference.
  • ความสูง: Install the product at a height of 1 meter or more from the floor to prevent shortening the remote control distance due to weak reception signals.
  • วัตถุที่เป็นโลหะ: Do not install products close to or cover them with metal objects. Maintain a minimum interval of 20cm to avoid signal attenuation and ensure optimal remote distance.
  • มุม: Avoid installation at wall corners or beam corners, maintaining a minimum interval of 20cm to prevent signal interference.

6. การดำเนินการ

6.1 V1 Dimmer Push Switch Control

When an external non-latching (momentary) wall switch is connected to the V1 dimmer:

  • ข่าวสารแบบสั้น: Turns the light ON or OFF.
  • กดค้าง (1-6 วินาที): Press and hold to achieve stepless dimming. With every subsequent long press, the light level will dim in the opposite direction (e.g., brighter to dimmer, then dimmer to brighter).
  • หน่วยความจำลดแสง: The light will return to its previously set dimming level when switched off and on again, even after a power failure.

6.2 Adjusting Light On/Off Fade Time

  • Set Fade Time to 3 seconds: Long press the V1 dimmer's MATCH key for 5 seconds, then short press the MATCH key 3 times. The LED indicator will blink 3 times to confirm the setting.
  • Restore Default Fade Time (0.5 seconds): Long press the V1 dimmer's MATCH key for 10 seconds to restore factory default parameters. The light on/off fade time will revert to 0.5 seconds.

6.3 RS1 Wireless Remote Control

RS1 Remote Control showing 4-zone control in a house layout

Image 8: RS1 Remote Control demonstrating 4-zone control in a home environment.

RS1 Remote Control showing brightness ring and 100% brightness

Image 9: RS1 Remote Control with brightness ring for 0-100% adjustment.

RS1 Remote Control with labels for buttons

Image 10: RS1 Remote Control button functions.

  • 'All' Button: Turns on/off all 4 zone lights simultaneously.
  • Touch Brightness Wheel: Touch and slide your finger along the wheel to smoothly adjust the brightness from 0-100%.
  • Numbered Buttons (1, 2, 3, 4): Press to turn on the specific zone light.
  • 'O' Buttons (next to 1, 2, 3, 4): Press to turn off the specific zone light.
  • S1, S2, S3 Buttons: These are 3 scene memory buttons. You can save and recall preferred brightness levels for different zones.

6.4 Remote Control Indicator Light Operation

RS1 Remote Control with battery compartment and wall holder options, plus indicator light operation

Image 11: RS1 Remote Control battery and indicator light details.

  • Turning Light On: The indicator displays blue.
  • Turning Light Off: The indicator displays red.
  • Touching Color Wheel: The indicator displays the same color as the selected light.
  • Invalid Operation (Light Off): If the light is off and you press a button or touch the wheel, the indicator displays red.
  • สถานะการนอนหลับ: To extend battery life, the touch wheel will enter a sleep state after a few seconds of no operation. Press any key to wake it up.

6.5 Matching Methods (V1 Dimmer to RS1 Remote)

To link a V1 dimmer to an RS1 remote control, use one of the following methods:

Two Matching Methods for V1 Dimmer and RS1 Remote

Image 12: Matching Methods for V1 Dimmer and RS1 Remote.

Method 1: Using the V1's Match Key

  1. Ensure the V1 dimmer is powered on.
  2. Short press the V1 dimmer's 'MATCH' key.
  3. Immediately press the desired zone key (1, 2, 3, or 4) on the RS1 remote control.
  4. The LED indicator on the V1 dimmer will flash rapidly a few times, indicating successful matching.

Method 2: Using Power Restart

  1. Ensure the V1 dimmer is connected to the LED strip and power supply.
  2. Switch off the power to the V1 dimmer (e.g., by flipping the circuit breaker or unplugging the power supply).
  3. เปิดเครื่องอีกครั้ง
  4. Immediately short press the desired zone key (1, 2, 3, or 4) on the RS1 remote control three times.
  5. The light connected to the V1 dimmer will blink three times, indicating successful matching.

7 การแก้ไขปัญหา

Malfunctions Analysis & Troubleshooting table

Image 13: Malfunctions Analysis & Troubleshooting Guide.

ความผิดปกติสาเหตุที่เป็นไปได้การแก้ไขปัญหา
ไม่มีแสง1.ไม่มีไฟ.
2. Wrong connection or insecure wiring.		1. ตรวจสอบแหล่งจ่ายไฟ
2. Check all connections for security and correctness.
Uneven intensity between front and rear of LED strip, with voltagอี ดรอป1. สายเอาท์พุตยาวเกินไป
2. เส้นผ่านศูนย์กลางลวดเล็กเกินไป
3. โอเวอร์โหลดเกินความสามารถในการจ่ายไฟ
4. โอเวอร์โหลดเกินความสามารถของคอนโทรลเลอร์		1. Reduce cable length or use loop supply.
2. Change to wider gauge wire.
3. Replace with a higher power supply.
4. Add a power repeater.
ไม่มีการตอบสนองจากรีโมท1. แบตเตอรี่ไม่มีไฟ
2. เกินระยะที่ควบคุมได้
3. คอนโทรลเลอร์ไม่ตรงกับรีโมต		1. Replace the battery (2x AAA).
2. Reduce the distance between the remote and the dimmer.
3. Rematch the remote to the dimmer (refer to Section 6.5).

8. เคล็ดลับผู้ใช้

  • When setting up multiple zones, ensure each V1 dimmer is matched to its intended zone on the RS1 remote to avoid cross-interference.
  • For optimal wireless performance, try to keep the RS1 remote within the specified 30m barrier-free range and avoid significant metal obstructions.
  • If experiencing flickering at very low dimming levels, ensure your LED strip and power supply are compatible with the dimmer's specifications and consider a power repeater if the load is high.

9. การรับประกันและการสนับสนุน

ผลิตภัณฑ์นี้มาพร้อมกับ รับประกัน 5 ปี นับจากวันที่ซื้อสินค้า ครอบคลุมถึงข้อบกพร่องจากการผลิตภายใต้การใช้งานปกติ โปรดเก็บหลักฐานการซื้อไว้เพื่อใช้ในการเรียกร้องการรับประกัน

The product is certified with CE และ ระเบียบข้อบังคับ RoHS, ensuring compliance with European safety, health, and environmental protection standards.

For technical support or warranty inquiries, please contact your retailer or the manufacturer directly.