Fardriver NS72450/NS84450/NS96450 Electric Motorcycle Controller User Manual

1. บทนำ

The Fardriver Electric Motorcycle Controller is a sine wave type brushless DC controller featuring a self-learning function for optimal performance. It is designed to work efficiently with QS Motors and can be adapted for other motor brands with appropriate parameter testing. This manual provides essential information for the setup, operation, and maintenance of your Fardriver controller, including models NS72450, NS84450, and NS96450.

2. คุณสมบัติหลัก

• Constructed with imported, high-performance Moss tubes.
• Utilizes an aluminum substrate scheme for efficient heat dissipation, with Moss tubes laid on the aluminum substrate and then placed on the PCB board.
• การออกแบบที่กะทัดรัดเพื่อการบูรณาการที่ง่ายดาย
• High efficiency, resulting in low temperature rise and small running current.
• Equipped with a self-learning function for excellent commonality across various setups.
• Companion mobile application compatible with both Android and Apple devices.
• Features a flux weakening function (note: the product itself does not contain magnetism).

3. การตั้งค่าและการติดตั้ง

Before installation, ensure all components are present. The controller package includes the main controller unit, a wiring harness, mounting screws, and a Bluetooth adapter. Fardriver controllers are available in two main versions: Hall version (e.g., NS72450, NS96450) and Encoder version (e.g., NS72450B, NS96450B). The 'B' suffix indicates an encoder version.

Image: Fardriver controller with its wiring harness, mounting screws, and Bluetooth adapter.

3.1 การเชื่อมต่อสายไฟ

Carefully follow the appropriate wiring diagram for your specific controller version (Hall or Encoder). Incorrect wiring can damage the controller or motor.

3.1.1 Wiring Definition for Hall Version (NS72450/NS96450)

Image: Detailed wiring diagram for the Hall Edition Fardriver controllers (NS72450/NS96450), illustrating the pinout for the 30-pin connector. Key connections include Hall sensors (HALLA, HALLB, HALLC), communication lines (485A/RXD, 485B/TXD, CANH, CANL), power (B+, B-, 60VC, BW5V), and control signals (SV, ACC+, FD, P, ALARM, W, RE, SPA, KEY, FW, FW2).

3.1.2 Wiring Definition for Encoder Version (NS72450B/NS96450B)

Image: Detailed wiring diagram for the Encoder Version Fardriver controllers (NS72450B/NS96450B), illustrating the pinout for the 30-pin connector. This diagram includes connections for Hall sensors (HALLA, HALLB, HALLC), communication lines (85A/RXD, 85B/TXD, CANH, CANL), power (B+, B-, 60VC, BWSV), and control signals (SV, ACC+, FD, P, ALARM, W, RE, SPA, KEY, FW, FW2). Note the slight differences in pin labels compared to the Hall version.

4. คู่มือการใช้งาน

The Fardriver controller is programmable via a dedicated mobile application, which connects using the included Bluetooth adapter. This app allows for monitoring real-time data and adjusting various parameters.

4.1 การใช้งานแอปพลิเคชันบนมือถือ

Download the official Fardriver application from your device's app store (compatible with Android and Apple). Connect the Bluetooth adapter to the controller and pair it with your mobile device. The app provides a dashboard for monitoring and a professional debug settings page for advanced configurations.

Image: Fardriver mobile application dashboard, displaying real-time operational data such as power output (KW), motor RPM, battery capacity, MOSFET temperature, motor temperature, line voltage, phase current, and throttle position.

Image: Fardriver mobile application's Professional Debug Settings page, offering detailed configuration options for parameters (e.g., dynamic, ratio in speed, angle offset, pole pairs), functions (e.g., cruise, anti-theft, charge), protection settings (e.g., high/low voltage, overcurrent, temperature), display options, PID parameters, and fixed parameters.

The self-learning function allows the controller to adapt to your motor's characteristics. For new motor brands, it is recommended to perform parameter testing to ensure optimal compatibility and performance.

5. การบำรุงรักษา

To ensure the longevity and reliable operation of your Fardriver controller, follow these general maintenance guidelines:

• Keep the controller clean and free from dust, dirt, and moisture.
• ตรวจสอบการเชื่อมต่อสายไฟทั้งหมดอย่างสม่ำเสมอ เพื่อให้แน่ใจว่าแน่นหนาและปราศจากสนิมหรือความเสียหาย
• Avoid exposing the controller to extreme temperatures or direct sunlight for extended periods.
• ให้แน่ใจว่ามีการระบายอากาศเพียงพอรอบๆ ตัวควบคุมเพื่อป้องกันความร้อนสูงเกินไป

6 การแก้ไขปัญหา

If you encounter issues with your Fardriver controller, consider the following basic troubleshooting steps:

• ไม่มีไฟ/ไม่มีการตอบสนอง: Check all power connections, including battery and ignition. Ensure the controller is receiving adequate voltage.
• มอเตอร์ไม่หมุน: Verify motor phase wire connections and Hall sensor connections (if applicable). Use the mobile app to check for error codes or unusual readings.
• พฤติกรรมผิดปกติ: Re-check all wiring for loose connections or shorts. If using a new motor, ensure the self-learning function has been properly executed or parameters have been adjusted.
• ปัญหาการเชื่อมต่อบลูทูธ: Ensure the Bluetooth adapter is correctly plugged in and powered. Restart your mobile device and the controller.

For more advanced diagnostics, utilize the Fardriver mobile application's debug settings to monitor real-time data and identify specific fault conditions.

7. ข้อมูลจำเพาะ

Below are the main specifications for the Fardriver NS series controllers:

7.1 NS72450 Series Specifications

7.2 NS96450 Series Specifications

Note: The NS84450 model shares similar characteristics with the NS72450 and NS96450 series, primarily differing in its specific voltage range within the Fardriver NS series.

8. เคล็ดลับผู้ใช้

• ความเข้ากันได้ของมอเตอร์: While Fardriver controllers generally pair well with QS Motors, if you are using a motor from a different brand, it is crucial to perform parameter testing and adjustments using the mobile application to ensure optimal performance and prevent potential issues.
• Controller Version Identification: Fardriver controllers come in Hall and Encoder versions. Models with a 'B' suffix (e.g., NS72450B, NS96450B) indicate an encoder version, which requires specific motor feedback. Ensure you have the correct controller version for your motor.
• Aesthetic Variation: Be aware that the controller units may come in blue or black colors, which are sent randomly. This does not affect functionality.

9. การรับประกันและการสนับสนุน

The Fardriver controller comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. For any issues encountered during usage, please contact the seller or manufacturer's support channel for assistance. The buyer is responsible for return shipping costs for warranty repairs or replacements.

It is recommended that users have adequate knowledge of electric kit assembly and conversion before installing this product. Professional installation is advised if you are unsure about any steps.