คู่มือผู้ใช้โมดูล EMAX Aeris Link TX/Micro ExpressLRS

1. บทนำ

Welcome to the world of advanced FPV flying with the EMAX Aeris Link. This sophisticated open-source ExpressLRS (ELRS) transmitter module is engineered to deliver unmatched performance and elevate your FPV adventures. Designed for versatility and ease of use, the Aeris Link offers robust transmission capabilities and seamless integration with your existing FPV setup.

The EMAX Aeris Link is available in various configurations, including TX modules for your radio transmitter and Micro ExpressLRS modules for your drone, supporting both 2.4GHz and 915MHz frequency bands to suit your specific range and regional requirements.

2. ข้อมูลจำเพาะ

The EMAX Aeris Link modules are built with high-quality composite materials to ensure durability and reliable performance. Key specifications are detailed below:

3. เนื้อหาบรรจุภัณฑ์

Depending on the specific model purchased (TX or Micro, 2.4GHz or 915MHz), your package should contain the following:

• EMAX Aeris Link TX Module OR Micro ExpressLRS Module
• Antenna(s) appropriate for the frequency band (2.4GHz or 915MHz)
• คู่มือการใช้งาน (เอกสารนี้)

Please inspect all contents upon receipt to ensure everything is present and undamaged.

4. คู่มือการติดตั้ง

4.1. Installing the TX Module

1. ติดเสาอากาศ: Carefully screw the provided antenna onto the SMA connector of the Aeris Link TX module. Ensure it is finger-tight, but do not overtighten.
2. Insert into Radio: Insert the Aeris Link TX module into the JR module bay of your compatible OpenTX/EdgeTX radio transmitter. Ensure it is seated firmly.
3. แหล่งจ่ายไฟภายนอก (ทางเลือก): If your radio's JR bay does not provide sufficient power, or for higher output power settings, connect an external power source (5-21V, recommended 2S/8.4V) to the XT30 interface on the module.

4.2. Connecting the Micro ExpressLRS Module

The Micro ExpressLRS module is typically integrated into your FPV drone's flight controller. Refer to your flight controller's manual for specific wiring instructions for CRSF protocol. The module features a Type-C interface for firmware updates and configuration, and an XT30 port for external power if needed.

4.3. การกำหนดค่าเริ่มต้น

1. เปิดเครื่อง: Power on your radio transmitter with the Aeris Link TX module installed.
2. Access ELRS Lua Script: Navigate to the ELRS Lua script on your radio's screen to configure settings such as binding phrase, output power, and packet rate.
3. ผูกพัน: Ensure your Micro ExpressLRS receiver module on the drone is also powered on. Use the ELRS Lua script to initiate the binding process. Both modules must have the same binding phrase and firmware version.
4. อัพเดตเฟิร์มแวร์: For optimal performance and new features, regularly check for and update the firmware on both your TX and Micro modules using the ExpressLRS Configurator via the Type-C USB port.

5. คู่มือการใช้งาน

5.1. OLED Screen Navigation (TX Module)

The 1.29-inch OLED screen on the Aeris Link TX module provides real-time flight control information and allows for easy adjustment of settings. Use the navigation buttons (if present) or your radio's controls to browse menus and modify parameters such as:

• กำลังขับ: Adjust transmission power from 10mW for short-range, low-interference environments up to 1000mW for maximum range and penetration.
• อัตราแพ็คเก็ต: Select the desired packet rate (e.g., 50Hz, 100Hz, 250Hz, 500Hz) based on your latency requirements and receiver capabilities. Higher packet rates generally offer lower latency but may consume more power.
• อัตราส่วนการวัดและส่งข้อมูลทางไกล: Configure the telemetry ratio to balance between control link robustness and telemetry data rate.
• Binding Status: Monitor the connection status with your receiver.

5.2. การปฏิบัติการบิน

Once bound and configured, the Aeris Link system provides a reliable control link for your FPV drone. Always perform a range check before flying, especially after changing settings or components. Ensure your drone's flight controller is correctly configured to receive CRSF signals from the ExpressLRS receiver.

6. การบำรุงรักษา

• รักษาความสะอาด: Regularly clean the module's exterior with a soft, dry cloth. Avoid using harsh chemicals or solvents.
• การดูแลเสาอากาศ: Ensure antennas are not bent or damaged. A damaged antenna can significantly reduce range and signal quality.
• อัพเดตเฟิร์มแวร์: Keep your module's firmware updated to the latest version to benefit from performance improvements and bug fixes.
• พื้นที่จัดเก็บ: เก็บโมดูลไว้ในที่แห้งและเย็น หลีกเลี่ยงแสงแดดโดยตรงและอุณหภูมิที่สูงหรือต่ำเกินไป

7 การแก้ไขปัญหา

7.1. No Link/Binding Issues

• Check Binding Phrase: Ensure the binding phrase on both the TX module and receiver is identical.
• ความไม่ตรงกันของเฟิร์มแวร์: Verify that both the TX module and receiver are running compatible firmware versions. Update if necessary.
• แหล่งจ่ายไฟ: Confirm the TX module and receiver are receiving adequate power. For TX modules, consider using external XT30 power if experiencing instability.
• การเชื่อมต่อเสาอากาศ: Ensure antennas are securely connected to both the TX module and receiver.

7.2. Reduced Range or Signal Loss

• กำลังขับ: Increase the output power setting on your TX module via the OLED screen or Lua script.
• ทิศทางของเสาอากาศ: Optimize the orientation of your TX and receiver antennas for best signal reception.
• การรบกวน: Fly in areas with minimal RF interference. Avoid flying near large metal objects, power lines, or Wi-Fi hotspots.
• ย่านความถี่: If experiencing issues in a 2.4GHz environment, consider using a 915MHz system for potentially better penetration and range, if permitted in your region.

7.3. Compatibility with Radio Transmitters

The EMAX Aeris Link TX module is designed for radio transmitters with a JR module bay and support for OpenTX or EdgeTX firmware. It supports the Crossfire Serial Data Protocol (CRSF). If your radio does not meet these specifications, compatibility may be limited. For example, older FrSky radios like the X9 Lite may require specific firmware or external adapters to function correctly with ExpressLRS modules.

8. เคล็ดลับผู้ใช้

• การเลือกความถี่: Choose your frequency band (2.4GHz or 915MHz) based on your local regulations and flying environment. 915MHz generally offers better range and penetration, while 2.4GHz is more common globally.
• การจัดการพลังงาน: For high output power settings (e.g., 500mW or 1000mW), always use the XT30 external power input on the TX module to ensure stable operation and prevent your radio's internal power supply from being overloaded.
• การสนับสนุนชุมชน: ExpressLRS has a large and active community. If you encounter complex issues, consult online forums and community groups for assistance.

9. การรับประกันและการสนับสนุน

EMAX products are manufactured to high standards. For any technical support or warranty claims, please contact the retailer or EMAX customer service directly. Keep your proof of purchase for warranty validation.