คู่มือการใช้งานสวิตช์โยกติดผนังอลูมิเนียมอัลลอยด์ WESA

1. สินค้าหมดview

The WESA FL-02-L is a high-quality push-button wall rocker switch featuring a durable aluminium alloy panel with a brushed finish. Designed for reliability and aesthetic appeal, this switch is suitable for various indoor environments.

Figure 1: WESA 2 Gang 1 Way Wall Rocker Switch (Exampเลอ)

คุณสมบัติหลัก:

• วัสดุ: Aluminium alloy with a metal brushed panel.
• ความทนทาน: Hardcore process, durable and resistant to falling, anti-drop and impact resistance.
• ความปลอดภัย: High temperature flame retardant material to prevent fire hazards.
• การซ่อมบำรุง: Easy to clean, resistant to dirt, matte finish without fingerprints.
• ออกแบบ: Smooth texture, simple style, wear-resistant and anti-scratch process.
• ใบรับรอง: RoHS, LVD, CE certified.

2. ข้อมูลด้านความปลอดภัย

คำเตือน: Installation should only be performed by a qualified electrician or competent person. Ensure the main power supply is switched off at the consumer unit/fuse box before commencing any electrical work. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always disconnect power before installation, maintenance, or repair.
• Do not exceed the specified current rating (16A).
• ตรวจสอบให้แน่ใจว่าการเชื่อมต่อสายไฟทั้งหมดแน่นหนาและหุ้มฉนวนอย่างถูกต้อง
• This product is designed for indoor use in dry conditions unless otherwise specified for outdoor variants.

3. การติดตั้ง

Before installation, verify that the switch type (e.g., 1 Gang 1 Way, 2 Gang 1 Way) and any integrated sockets (e.g., 1 Socket No Ground, 1 Socket With Ground, 1 Socket 2 USB) match your requirements.

เครื่องมือที่จำเป็น:

• ไขควง (ชนิดที่เหมาะสมสำหรับขันสกรูขั้วต่อ)
• ระบำลวด
• เล่มที่tagผู้ทดสอบอิเล็กทรอนิกส์

ขั้นตอนการติดตั้ง:

1. หมดแรง: Turn off the main power supply at the circuit breaker or fuse box. Verify that the power is off using a voltagอีผู้ทดสอบ
2. ถอดสวิตช์เก่าออก (ถ้ามี): Carefully remove the existing switch from the wall box. Disconnect the wires, noting their connections.
3. เตรียมสายไฟ: Strip approximately 10-12mm of insulation from the ends of the electrical wires.
4. เชื่อมต่อสายไฟ: Connect the wires to the corresponding terminals on the back of the WESA switch. Typically, live (L) and load (L1, L2, etc.) wires are connected. For switches with ground, ensure the ground wire is securely connected to the ground terminal. Refer to the wiring diagram on the back of the switch or the image below for guidance.
5. สวิตช์ติดตั้ง: Carefully place the wired switch into the wall box. Secure it using the mounting screws provided. Ensure no wires are pinched.
6. ติดแผ่นหน้า: Snap or screw the decorative faceplate onto the switch mechanism.
7. คืนค่าพลัง: เปิดแหล่งจ่ายไฟหลักอีกครั้ง
8. ทดสอบฟังก์ชันการทำงาน: Test the switch to ensure it operates correctly.

รูปที่ 2: ด้านหลัง view of the switch, showing terminal connections.

4. คู่มือการใช้งาน

The WESA wall rocker switch operates as a standard push-button switch.

• เปิด: Press the top or bottom part of the rocker switch to activate the connected light or appliance.
• วิธีปิด: Press the opposite part of the rocker switch to deactivate the connected light or appliance.

For models with integrated sockets, simply plug your device into the socket. For USB charging ports, connect your USB cable to charge compatible devices.

5. การบำรุงรักษา

The WESA switch is designed for low maintenance and long-lasting performance.

• การทำความสะอาด: The aluminium alloy panel is easy to clean and resistant to dirt and fingerprints. Use a soft, damp cloth to wipe the surface. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• การตรวจสอบ: Periodically inspect the switch for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and consult a qualified electrician.

Figure 3: The switch surface is designed for easy cleaning.

6 การแก้ไขปัญหา

If you encounter issues with your WESA wall switch, consider the following common troubleshooting steps:

• ไม่มีไฟเข้าอุปกรณ์:
  • ตรวจสอบเบรกเกอร์วงจรหรือกล่องฟิวส์เพื่อให้แน่ใจว่ามีกระแสไฟฟ้าไหลอยู่
  • Verify that the light bulb or appliance is working correctly.
  • Ensure all wiring connections to the switch are secure (WARNING: Disconnect power before checking connections).
• Switch Feels Loose:
  • Ensure the mounting screws securing the switch to the wall box are tightened.
  • Check if the faceplate is properly attached.
• กลิ่นไหม้/ความร้อนสูงเกินไป:
  • Immediately turn off power at the circuit breaker.
  • This indicates a serious electrical issue. Do not attempt to fix it yourself. Contact a qualified electrician immediately.

If the problem persists after these steps, contact a qualified electrician or the manufacturer for assistance.

7. ข้อมูลจำเพาะ

ขนาด :

Figure 4: Detailed dimensions for various WESA switch and socket configurations.

• Standard Switch (e.g., 1 Gang, 2 Gang):
  • Faceplate: 86mm (3.38in) x 86mm (3.38in)
  • Total Depth: 40mm (1.57in)
  • Back Box Dimensions: 53mm (2.08in) width, 48mm (1.88in) height, 24mm (0.94in) depth
• 1 Socket No Ground:
  • Faceplate: 86mm (3.38in) x 86mm (3.38in)
  • Total Depth: 39mm (1.53in)
  • Back Box Dimensions: 58mm (2.28in) width, 26mm (1.02in) height, 26mm (1.02in) depth
• 1 Socket With Ground (Type 1):
  • Faceplate: 86mm (3.38in) x 86mm (3.38in)
  • Total Depth: 38mm (1.49in)
  • Back Box Dimensions: 61mm (2.40in) width, 32mm (1.25in) height, 38mm (1.49in) depth
• 1 Socket With Ground (Type 2):
  • Faceplate: 86mm (3.38in) x 86mm (3.38in)
  • Total Depth: 38mm (1.49in)
  • Back Box Dimensions: 72mm (2.83in) width, 36mm (1.41in) height, 36mm (1.41in) depth

8. เคล็ดลับผู้ใช้

• ตรวจสอบขนาด: ก่อนการซื้อasing or installing, always double-check the dimensions of the switch and your existing wall box to ensure a proper fit. Refer to the detailed dimension diagrams in the Specifications section.
• การติดตั้งโดยมืออาชีพ: For safety and optimal performance, it is highly recommended to have this product installed by a certified electrician.
• การบูรณาการด้านสุนทรียศาสตร์: The switch's simple and delicate design, combined with its matte finish, helps it blend seamlessly into various home decor styles, from corridors and bedrooms to bathrooms.

Figure 5: The WESA switch is suitable for various scenarios including corridors, bedrooms, and bathrooms.

9. การรับประกันและการสนับสนุน

The WESA FL-02-L Wall Rocker Switch comes with a รับประกัน 10 ปี, reflecting the manufacturer's commitment to quality and durability.

For technical support, warranty claims, or any questions regarding the product, please contact your retailer or the WESA Official Store directly. When contacting support, please provide your model number (FL-02-L) and a detailed description of the issue.