M6H Electric Bike LCD Display Meter and Sine Wave Controller User Manual

การแนะนำ

This manual provides detailed instructions for the installation, operation, and maintenance of your M6H Electric Bike LCD Display Meter and 36V 350W Sine Wave Controller. Please read this manual carefully before use to ensure proper function and longevity of your product.

การติดตั้งและการตั้งค่า

The M6H LCD Display and Sine Wave Controller are designed for universal electric bike and scooter applications. Professional installation is recommended due to the electrical nature of the components.

เนื้อหาแพ็คเกจ:

• 1 x M6H LCD Display
• 1 x 36V 350W Sine Wave Controller

ขั้นตอนการติดตั้ง:

1. ติดตั้งจอแสดงผล LCD: Securely attach the M6H LCD Display to your bicycle handlebar. The display is compatible with handlebar sizes 22.2MM, 25.4MM, 28.6MM, and 31.8MM. Ensure the display is positioned for optimal visibility and accessibility.
2. เชื่อมต่อคอนโทรลเลอร์: The Sine Wave Controller features multiple color-coded wires for connection to the motor, battery, display, throttle, and other e-bike components. Carefully match each wire to its corresponding function on your e-bike system. Refer to your e-bike's wiring diagram for specific connections.
3. Connect the LCD Display to the Controller: Connect the communication cable from the M6H LCD Display to the designated port on the Sine Wave Controller. The communication method is UART.
4. Secure all Connections: Ensure all electrical connections are tight and properly insulated to prevent short circuits or damage.
5. การเพิ่มพลังเริ่มต้น: After all connections are made, power on your e-bike system. The LCD display should illuminate and show initial readings.

คำแนะนำการใช้งาน

The M6H LCD Display provides essential information and control over your electric bike's functions.

ฟังก์ชั่นการแสดงผล:

• จอแสดงความเร็ว: แสดงความเร็วในการขับขี่ปัจจุบัน
• ไฟแสดงสถานะแบตเตอรี่: แสดงระดับประจุแบตเตอรี่ที่เหลืออยู่
• ฟังก์ชันบูสต์: Activates a power boost mode.
• Boost Gear: Indicates the current level of pedal assist (PAS).
• Subtotal Mileage/Total Mileage: Tracks trip distance and total distance traveled.
• ระยะเวลาการทำงาน: Shows the duration of the current ride.
• Metric Conversion: Allows switching between metric (km/h, km) and imperial (mph, miles) units.
• การแจ้งเตือนข้อผิดพลาด: Displays error codes or warnings if issues are detected.

ฟังก์ชั่นการชาร์จ USB:

The display is equipped with a USB charging port, providing 5V/500MA output for charging small electronic devices.

การซ่อมบำรุง

Regular maintenance ensures the optimal performance and longevity of your M6H display and controller.

• การทำความสะอาดจอแสดงผล: ใช้แบบนุ่มๆamp cloth to gently wipe the display screen. Avoid abrasive cleaners or solvents that could damage the screen or casing.
• ป้องกันจากองค์ประกอบ: While designed for outdoor use, avoid prolonged exposure to heavy rain or direct water spray. Ensure the display and controller are kept as dry as possible.
• ตรวจสอบการเชื่อมต่อ: ตรวจสอบการเชื่อมต่อสายไฟทั้งหมดเป็นระยะ เพื่อให้แน่ใจว่าแน่นหนาและปราศจากสนิมหรือความเสียหาย
• หลีกเลี่ยงผลกระทบ: Protect the display from physical impact or drops, which can cause internal damage or screen cracks.

การแก้ไขปัญหา

If you encounter issues with your M6H LCD Display or Sine Wave Controller, refer to the following common problems and solutions:

• หน้าจอไม่เปิด:
  • Check the main power connection from the battery to the controller.
  • Ensure the connection between the display and controller is secure.
  • ตรวจสอบให้แน่ใจว่าแบตเตอรี่ของจักรยานไฟฟ้ามีประจุไฟเพียงพอ
• Incorrect Speed or Mileage Readings:
  • Check the speed sensor connection to the controller and ensure the sensor is properly aligned with the magnet on the wheel.
  • Confirm that the wheel circumference setting (if adjustable) is correct.
• Motor Not Responding or Irregular Power:
  • Check all motor phase wire connections and Hall sensor connections to the controller.
  • Ensure the throttle or PAS sensor is correctly connected and functioning.
  • The display's 'Fault Prompt' may indicate a specific error code. Consult a professional or your e-bike's main manual for interpretation of these codes.
• การชาร์จผ่าน USB ไม่ทำงาน:
  • Ensure the e-bike system is powered on.
  • Check the USB cable and the device being charged.

For complex issues or if troubleshooting steps do not resolve the problem, it is recommended to consult a qualified e-bike technician.

ข้อมูลจำเพาะ

เคล็ดลับสำหรับผู้ใช้

• Always ensure your e-bike's battery is fully charged before long rides to maximize the utility of the display and controller.
• Familiarize yourself with the display's various modes and settings to optimize your riding experience.
• Keep the display screen clean for clear visibility, especially in bright sunlight.
• If you notice any unusual behavior or error messages, refer to the troubleshooting section or consult a professional.

การรับประกันและการสนับสนุน

For any product-related inquiries, technical support, or warranty claims, please contact your original seller or the manufacturer. Keep your purchase receipt as proof of purchase.

Please note that product appearance, color, and printed text may vary slightly due to different manufacturing batches, but this will not affect the product's functionality or use.