คู่มือผู้ใช้สถานีบัดกรี AIFEN A9PRO

1. บทนำ

This manual provides detailed instructions for the safe and efficient operation and maintenance of your AIFEN A9PRO Soldering Station. Please read this manual thoroughly before using the device and keep it for future reference.

The AIFEN A9PRO is a 2023 Edition intelligent soldering station designed for precision work, compatible with C115, C210, and C245 series soldering iron tips. It features rapid heating, quick temperature recovery, and precise temperature control, making it ideal for repairing mobile phones, PCB BGA, and other delicate electronic components.

Figure 1: AIFEN A9PRO Soldering Station overview.

2. คำแนะนำด้านความปลอดภัย

When the power is on, the soldering iron tip temperature is between 100℃-450℃ (212°F-842°F). To prevent burns or fire due to misuse, please strictly observe the following safety precautions:

• อย่าสัมผัสชิ้นส่วนโลหะใกล้กับปลายหัวแร้ง
• Do not use the soldering station near flammable materials.
• Inform other personnel in the work area that the soldering iron tip is hot and can cause burns or dangerous accidents.
• Always turn off the power when resting, after finishing work, or when replacing components or tips. Allow the tip to cool to room temperature before handling.
• This product operates at a rated voltage and frequency. Always refer to the label on the back of the machine for specific details.
• Do not use this product if it is damaged, especially if the power cord is compromised.
• The soldering station uses a three-wire grounded plug. Ensure it is inserted into a properly grounded three-hole socket. Do not modify the plug or use an ungrounded adapter. If an extension cord is needed, use a grounded three-wire power cord.
• Do not use the soldering iron for any tasks other than soldering.
• Do not tap the soldering iron tip on the workbench to remove flux residue, as this can severely damage the tip.
• When replacing parts, always use original factory components.
• อย่าทำamper with the soldering iron or modify it without authorization.
• Keep the soldering iron dry. Do not use it with wet hands.
• Soldering produces smoke; ensure adequate ventilation in your workspace.
• Do not allow children to operate or store this station in an accessible place. Adult supervision is required if children are present.

3. คุณสมบัติของผลิตภัณฑ์

The AIFEN A9PRO 2023 Edition offers several enhancements and key features:

• Rapid Heating & Recovery: Heats up in two seconds and returns to temperature in one second.
• Handle Button Control: Standard feature allowing temperature adjustment directly from the handle.
• Versatile Tip Compatibility: Designed to accommodate C115, C210, and C245 series soldering iron tips.
• Enlarged Plug-in Box: A larger design for convenient storage and access to various tip sizes.
• Adjustable Hibernation Bracket: The bracket angle can be adjusted for ergonomic use and to activate sleep mode.
• Integrated Tip Storage: Features a new silicone organizer for soldering tips.
• การทำความสะอาดขั้นสูง: Includes a copper wire cleaning brush for effective tip maintenance, an upgrade from the A9's blue sponge.
• จอแสดงผลพลังงาน: The A9PRO model includes a power display and heating percentage on the screen, providing more detailed operational feedback compared to the A9's simple indicator light.
• Relocated Power Switch: The main power switch has been moved from the rear to the left side for easier access.

Figure 2: A9PRO highlighting rapid heating and handle temperature control.

Figure 3: A9PRO features a power display and heating percentage, an upgrade from the A9's simple indicator light.

4. ข้อมูลจำเพาะ

ขนาดและน้ำหนักของบรรจุภัณฑ์:

• ความยาว : 23 ซม.
• ความกว้าง : 20 ซม.
• ส่วนสูง : 18 ซม.
• น้ำหนัก: 1.475 กก.

5. คำแนะนำในการตั้งค่า

Follow these steps to set up your AIFEN A9PRO Soldering Station:

1. เชื่อมต่อด้ามจับ: Ensure the main power switch is OFF. Connect the soldering iron handle device to the designated handle socket on the host machine.
2. Install Heating Core/Tip: Select the appropriate heating core/tip (C115, C210, or C245 series) for your task and securely install it into the handle.
3. ตำแหน่งสถานี: Place the soldering station on a stable, heat-resistant surface. Position the handle on its designated rack.
4. เชื่อมต่อพลังงาน: Plug the three-wire grounded power cord into a suitable grounded three-hole electrical outlet.
5. เปิดเครื่อง: Turn on the main power switch. The display window will show "---", indicating the station is in standby mode.

Important Note: Always turn off the power before connecting or disconnecting the handle or changing tips to prevent damage to the control circuit board.

Figure 4: Proper placement of the soldering iron handle on the adjustable bracket.

6. คู่มือการใช้งาน

The AIFEN A9PRO offers precise control over temperature and various settings:

6.1. Temperature Setting and Storage

• เพิ่มขึ้นasinอุณหภูมิ: Press the '▲' button once to increase the set temperature by 1°C. The display will show the new set temperature. To rapidly increase the temperature, press and hold the '▲' button until the desired temperature is reached, then release.
• ลดลงasinอุณหภูมิ: Press the '▼' button once to decrease the set temperature by 1°C. The display will show the new set temperature. To rapidly decrease the temperature, press and hold the '▼' button until the desired temperature is reached, then release.
• การตั้งค่าการบันทึก: After setting your desired temperature, you can save it to one of three channels (CH1, CH2, CH3). Press and hold the corresponding 'CH1', 'CH2', or 'CH3' button to save the current settings to that channel.
• เรียกคืนการตั้งค่า: To recall a saved temperature setting, simply press (for less than 1 second) the 'CH1', 'CH2', or 'CH3' button corresponding to the desired stored setting.

Figure 5: Handle buttons for temperature adjustment.

6.2. Celsius and Fahrenheit Conversion

• While the station is powered on, short press the 'SET' button to toggle the temperature display between Celsius ('C') and Fahrenheit ('F').

6.3. Key Lock Setting

• To enable or disable the key lock function, turn off the host machine. Press and hold the 'CH1' button, then power on the station. The display will show ' ' if the key lock is enabled, and ' ' if it is disabled.

6.4. Buzzer Setting

• To enable or disable the buzzer sound, turn off the host machine. Press and hold the 'CH2' button, then power on the station. The display will show ' ' (and emit a prompt sound) if the buzzer is enabled, and ' ' if it is disabled.

6.5. Standby Temperature Setting

• To set the standby temperature, turn off the host machine. Press and hold the 'CH3' button, then power on the station. This will enter the standby temperature setting interface. You can choose from 0°C, 150°C, 180°C, or 200°C (0°C will turn off standby mode). After making your selection, short press 'CH3' to save and exit.

6.6. การสอบเทียบอุณหภูมิ

• Whenever the heating element is replaced, the temperature must be recalibrated for accuracy. While the station is in working state, press and hold the 'SET' button to enter the temperature calibration mode. Use the '▲' or '▼' buttons to adjust the temperature as needed. Finally, press 'SET' again to save and exit the calibration mode.

7. การบำรุงรักษา

Proper maintenance ensures the longevity and optimal performance of your soldering station.

7.1. Soldering Tip Care

• การเลือกอุณหภูมิ: High temperatures can degrade the soldering tip's function. Utilize the lowest possible temperature for your soldering task. The A9PRO's excellent temperature recovery allows for effective soldering at lower temperatures, protecting sensitive components.
• การทำความสะอาดปกติ: Regularly clean the soldering tip using the copper wire cleaning ball provided. After soldering, residual flux can lead to oxidation and carbide buildup, which damages the tip, causes soldering errors, and reduces heat conduction.
• Cleaning When Not in Use: Avoid leaving the soldering iron at high temperatures for extended periods when not in use. This can cause solder on the tip to oxidize, significantly reducing its heat conduction efficiency.
• หลังการใช้แต่ละครั้ง: After completing your work, clean the soldering iron tip and apply a fresh layer of tin (re-tinning) to prevent oxidation.

7.2. Checking and Cleaning the Soldering Tip

• อย่าทำ File: อย่าใช้ file or abrasive material to remove oxide from the soldering tip.
• ขั้นตอน:
  1. ตั้งอุณหภูมิไว้ที่ 250°C (482°F)
  2. Once the temperature stabilizes, clean the tip with a cleaning sponge or the copper wire brush and inspect its condition.
  3. If the tinned part of the soldering iron tip shows black oxide, re-tin the tip with a new layer of solder. Then, wipe the tip with a clean sponge until all oxide is removed, and re-tin it again.
  4. If the soldering iron tip is deformed or heavily rusted, it must be replaced with a new one.

7.3. Heating Core Replacement

The AIFEN A9PRO uses a heating core integrated with the welding head. To replace it:

1. Turn off the power to the soldering station.
2. Allow the heating core to cool down completely.
3. Carefully unplug the old heating core/tip assembly.
4. Insert the new heating core/tip assembly.

Figure 6: Enlarged puller for easy removal and insertion of 210/245 series tips.

8 การแก้ไขปัญหา

If you encounter any issues with your AIFEN A9PRO Soldering Station, refer to the following common problems and solutions:

• Display shows "S-E" with intermittent buzzer:

  This indicates that the heating core is either burnt out, disconnected, or not properly placed in the handle. Check the heating core and its connection to the handle. Ensure the tip is fully inserted.

• Display shows "H-A" with continuous beeping:

  This signifies that the heating core has a short circuit. Immediately turn off the power. Remove the short-circuited heating core. Wait for 3 minutes, then power on the station again. Replace the faulty heating core if necessary.

9. เคล็ดลับผู้ใช้

• Choosing the Right Tip: The A9PRO is compatible with C115, C210, and C245 series tips.
  • C115 Tips: Best for ultra-fine circuits under a microscope, such as multi-layer circuit boards or complex flying leads. Use cutter tips for small solder joints and pointed tips for tiny solder joints.
  • C210 Tips: Ideal for mobile phone repairs, car remote controls, precision small electrical appliances, and cables. Use cutter tips for small to medium solder joints (e.g., IC bases) and sharp tips for small flying wires and small solder joints.
  • C245 Tips: Recommended for home appliance maintenance, general mobile phone repair, and computer motherboards. These high-power (120W) tips handle both large and small solder joints effectively, though their larger size might make tiny solder joints slightly more challenging.
  

  Figure 7: Guide to selecting appropriate soldering tips for different tasks.
• เล่มที่tagความเข้ากันได้: The A9PRO supports a universal input voltage of AC100-240V. However, ensure you select the correct plug type (e.g., EU plug for 220V regions like Germany, France; US plug for 110V regions like the United States, Canada) to match your local electrical outlets.

10. คำถามที่พบบ่อย (FAQ)

Q: Is the A9PRO compatible with JCD soldering tips?

A: The A9PRO is designed for compatibility with AIFEN/SUGON C115, C210, and C245 series tips. Compatibility with other brands like JCD is not guaranteed, and using non-compatible tips may affect performance or damage the unit.

Q: Can C210 tips be used with a C115 handle?

A: The A9PRO station itself supports C115, C210, and C245 series tips. However, each tip series typically requires its corresponding handle (e.g., C210 tips with a C210 handle). Ensure you use the correct handle for the tip series you intend to use.

Q: What is the thinnest tip available for the A9PRO?

A: The C115 series tips are generally the thinnest and most precise, ideal for micro-soldering applications. Refer to the "User Tips" section for guidance on selecting the appropriate tip for your work.

11. การรับประกันและการสนับสนุน

For optimal performance and to maintain your warranty, always use original factory parts for any replacements or repairs.

For further detailed information, you may refer to the official user manual PDF available ที่นี่.

If you require technical assistance or have questions not covered in this manual, please contact your retailer or the manufacturer's customer support.