1. บทนำ
The Hanmatek DOS1102 is a high-performance digital storage oscilloscope designed for various electronic measurement tasks. Featuring a 110MHz bandwidth, 1GSa/s real-time sampling rate, and a 7-inch TFT LCD, it provides reliable and accurate waveform analysis. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your DOS1102 oscilloscope.
2. การตั้งค่า
2.1. การเปิดออกและการตรวจสอบ
Carefully unpack the oscilloscope and check for any signs of damage. Verify that all standard accessories are included:
- Hanmatek DOS1102 Digital Oscilloscope
- Two Oscilloscope Probes
- Power Cords (specific to region)
- Adjustment Tool (screwdriver)
- คู่มือฉบับย่อ / คู่มือผู้ใช้
- ซีดีซอฟแวร์
2.2. ทางกายภาพมากกว่าview
Familiarize yourself with the front panel controls and connectors:
- แสดง: 7-inch TFT (True Color) LCD screen with 65535 colors and 800 x 480 pixels resolution.
- Input Channels (CH1, CH2): BNC connectors for probe connection.
- ปุ่มควบคุม: Dedicated knobs for Multipurpose, Position, Horizontal, Vertical, and Trigger adjustments.
- ปุ่มฟังก์ชั่น: Buttons for Utility, Measure, Acquire, Cursor, Display, Storage, etc.
- อินเทอร์เฟซ USB Host: Located on the front panel for data storage.
2.3. การเชื่อมต่อพลังงาน
Connect the provided power cord to the AC input on the rear panel of the oscilloscope and then to a suitable power outlet.
2.4. การเชื่อมต่อโพรบ
Connect the oscilloscope probes to the CH1 and CH2 BNC input connectors on the front panel. Ensure a secure connection. The probes are used to connect the oscilloscope to the circuit under test.
3. คู่มือการใช้งาน
3.1. เปิด/ปิดเครื่อง
Press the power button on the front panel to turn the oscilloscope on or off.
3.2. Basic Waveform Display
After powering on, connect a signal to CH1 or CH2. Use the Vertical (Position and Scale) and Horizontal (Position and Scale) knobs to adjust the waveform's position and size on the screen. The oscilloscope features a 110MHz bandwidth and 1GSa/s real-time sampling rate for accurate signal capture.
3.3. Triggering
The Trigger section allows you to stabilize repetitive waveforms. Adjust the Trigger Level knob to set the voltage threshold at which the oscilloscope starts acquiring data. Use the Trigger Menu button to access advanced trigger settings.
3.4. การวัด
Press the 'Measure' button to access automatic measurement functions. The oscilloscope can display various parameters such as frequency, peak-to-peak voltagอี, อาร์เอ็มเอส วอลุ่มtagอี และอื่นๆ อีกมากมาย
3.5. การจัดเก็บข้อมูล
The USB Host interface on the front panel allows you to save waveform data, screenshots, and settings to a USB flash drive. The storage depth for acquired waveforms is not less than 10K sampจุดหลิง
4. การบำรุงรักษา
4.1. การทำความสะอาด
To clean the oscilloscope, use a soft, dry cloth. For stubborn dirt, a cloth lightly dampened with water or a mild cleaning solution can be used. Avoid using abrasive cleaners or solvents that could damage the casinหรือหน้าจอ โปรดตรวจสอบให้แน่ใจว่าอุปกรณ์ปิดเครื่องและถอดปลั๊กออกก่อนทำความสะอาด
4.2. การจัดเก็บ
Store the oscilloscope in a clean, dry environment away from direct sunlight, extreme temperatures, and high humidity. When not in use for extended periods, disconnect all probes and power cables.
5 การแก้ไขปัญหา
- ไม่มีไฟฟ้า: Ensure the power cord is securely connected to both the oscilloscope and the power outlet. Check the power button.
- ไม่มีการแสดงรูปคลื่น: Verify that the input signal is connected correctly to CH1 or CH2. Adjust the Vertical Scale (V/div) and Horizontal Scale (s/div) knobs to bring the waveform into view. Check the trigger settings.
- รูปคลื่นไม่เสถียร: Adjust the Trigger Level and Trigger Mode settings to stabilize the waveform. Ensure the trigger source is correctly selected.
- การวัดที่ไม่ถูกต้อง: Calibrate probes if necessary. Ensure the input coupling (AC/DC) is appropriate for the signal being measured.
- ความผิดปกติของอุปกรณ์: If the oscilloscope does not function correctly upon receipt, contact customer support for immediate assistance. The manufacturer offers replacement for new items at once for such issues.
6. ข้อมูลจำเพาะ
| คุณสมบัติ | ข้อมูลจำเพาะ |
|---|---|
| พิมพ์ | ออสซิลโลสโคป |
| หมายเลขรุ่น | ดอส1102 |
| เงื่อนไข | ใหม่เอี่ยม 100% |
| แบนด์วิธ | 110เมกะเฮิรตซ์ |
| เรียลไทม์ Sampลิงอัตรา | 1GSa/วินาที |
| ช่องทางการ | 2 ช่อง |
| อัตราการบันทึกรูปคลื่นสูงสุด | 50,000 วัตต์-เมตร/วินาที |
| Time Base Range (s/div) | 2ns/div - 1000s/div, ทีละ 1-2-5 |
| ความละเอียดการแสดงผล | 800*480 พิกเซล |
| ประเภทจอภาพ | 7-inch TFT (True Color) LCD, 65535 colors |
| ขนาด (กว้าง*ยาว*สูง) | 301มม. * 152มม. * 70มม. |
| การใช้พลังงาน | Not higher than 18W |
| อินเทอร์เฟซ USB | USB Device & Host interface (for data storage) |
7. การรับประกันและการสนับสนุน
7.1. ข้อมูลการรับประกัน
The Hanmatek DOS1102 oscilloscope typically comes with a warranty period. For initial defects, new items may be replaced for free within 1-3 months. For other issues, free repair services are generally available for 1-2 years, depending on the specific product and terms.
7.2. การสนับสนุนด้านเทคนิค
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact the seller or manufacturer directly. Provide your product model (DOS1102) and a detailed description of the issue.
8. เคล็ดลับผู้ใช้
- การสอบเทียบหัววัด: Regularly calibrate your oscilloscope probes for accurate measurements. Most oscilloscopes have a dedicated output for probe compensation.
- การถ่ายโอนข้อมูล USB: Utilize the USB host interface to save important waveform data or screenshots for later analysis or documentation.
- ความหลากหลายของการใช้งาน: This oscilloscope is suitable for a wide range of applications, including PCB design, testing, and general electronic circuit analysis.