Fodsports Helmet Earphone & Microphone Instruction Manual

สินค้าเกินview

This manual provides instructions for the Fodsports helmet earphone and microphone accessory, designed specifically for use with Fodsports FX2 and FX10C motorcycle Bluetooth intercom systems. This accessory enhances your riding experience by providing clear audio output and reliable voice input for communication and entertainment.

เนื้อหาแพ็คเกจ

แพ็คเกจนี้ประกอบด้วยส่วนประกอบต่อไปนี้:

• Helmet Speakers (2 units)
• ไมโครโฟนแบบบูม (สำหรับหมวกกันน็อคแบบเปิดหน้า)
• Soft Wire Microphone (for full-face helmets)
• Main Connection Cable (with USB-C connector)
• Microphone Foam Covers
• Adhesive Pads for Speakers and Microphone

คำแนะนำการตั้งค่า

1. การเลือกไมโครโฟนที่เหมาะสม

• ไมโครโฟนแบบบูม: Recommended for open-face, modular, or flip-up helmets where the microphone can be easily positioned in front of your mouth.
• ไมโครโฟนแบบสายอ่อน: Ideal for full-face helmets, as it can be tucked discreetly into the helmet lining.

2. การติดตั้งลำโพง

1. Clean the inside of your helmet's ear pockets thoroughly to ensure good adhesion.
2. Attach the adhesive pads to the back of each speaker.
3. Carefully place the speakers inside the helmet's ear pockets, ensuring they are aligned with your ears for optimal sound quality. Press firmly to secure.

3. การติดตั้งไมโครโฟน

1. For Boom Microphone: Attach the adhesive pad to the microphone base. Mount it on the inside of the helmet's chin bar, positioning the microphone head approximately 1-2 cm from your mouth.
2. For Soft Wire Microphone: Secure the microphone using an adhesive pad or by tucking it into the helmet's cheek pad lining, ensuring it is positioned close to your mouth.

4. Connecting to the Intercom Unit

1. Route the speaker and microphone cables neatly within the helmet lining to avoid interference and ensure comfort.
2. Connect the main cable's USB-C connector to the corresponding port on your Fodsports FX2 or FX10C intercom unit. Ensure a secure connection.

คำแนะนำการใช้งาน

This earphone and microphone kit functions as an audio input/output accessory for your Fodsports FX2 or FX10C intercom unit. All primary controls for volume, communication, and mode selection are managed directly through your intercom unit.

การเล่นเสียง

Once connected, all audio from your intercom unit, including music, GPS navigation, phone calls, and intercom conversations, will be routed through the helmet speakers. Adjust volume directly on your Fodsports intercom unit.

การใช้งานไมโครโฟน

The installed microphone captures your voice for intercom communication and phone calls. Ensure it is positioned correctly for clear voice transmission and effective noise reduction.

การซ่อมบำรุง

การทำความสะอาด

• Wipe the speaker surfaces and microphone with a soft, dry, or slightly damp ผ้า.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the components.
• The microphone foam covers can be gently cleaned or replaced if they become worn or dirty.

พื้นที่จัดเก็บ

When not in use, store the helmet with the installed accessory in a cool, dry place, away from direct sunlight and extreme temperatures.

การดูแลสายเคเบิล

Avoid sharp bends, kinks, or excessive pulling on the cables to prevent internal damage. Ensure cables are not pinched when putting on or taking off the helmet.

การแก้ไขปัญหา

ไม่มีเสียงจากลำโพง

• ตรวจสอบการเชื่อมต่อ: Ensure the main connection cable is securely plugged into the Fodsports intercom unit.
• Intercom Power: Verify that your Fodsports FX2 or FX10C intercom unit is powered on and functioning correctly.
• การตั้งค่าระดับเสียง: Confirm that the volume on your intercom unit is not set to minimum or muted.

Poor Microphone Audio / Excessive Noise

• ตำแหน่งการวางไมโครโฟน: Ensure the microphone is positioned close to your mouth (1-2 cm) for optimal voice pickup.
• ประเภทไมโครโฟน: Verify that the correct microphone type (boom for open-face, soft for full-face) is being used for your helmet type.
• ฝาครอบโฟม: Check if the microphone foam cover is properly installed and intact to reduce wind noise.

การเชื่อมต่อไม่ต่อเนื่อง

• Secure Connectors: Ensure all connectors (speakers, microphone, main cable to intercom) are fully and firmly seated.
• การตรวจสอบสายเคเบิล: Visually inspect all cables for any signs of damage, fraying, or pinching.

ข้อมูลจำเพาะ

การรับประกันและการสนับสนุน

For any warranty claims, technical support, or inquiries regarding your Fodsports helmet earphone and microphone accessory, please contact Fodsports customer service or the authorized seller from whom you purchased the product. Please refer to the original Fodsports FX2 or FX10C intercom manual for specific troubleshooting and operational details related to the main intercom unit.

เคล็ดลับสำหรับผู้ใช้

• การตรวจสอบความเข้ากันได้: This earphone and microphone kit is exclusively designed for Fodsports FX2 and FX10C intercom systems. It is not guaranteed to be compatible with other intercom models or brands.
• Optimal Sound Experience: To achieve the best audio quality, ensure that the speakers are positioned directly over your ears inside the helmet. Adjust their position slightly if needed after wearing the helmet.
• การสื่อสารที่ชัดเจน: For maximum voice clarity and to minimize background noise, position the microphone approximately 1-2 cm from your mouth.