WFLY ET07 10-Channel RC Radio Transmitter Instruction Manual

1. บทนำ

Thank you for choosing the WFLY ET07 10-Channel RC Radio Transmitter. This manual provides essential information for the safe and effective operation, setup, and maintenance of your new remote control system. Please read this manual thoroughly before use to ensure proper functionality and to maximize your enjoyment of the product.

2. ข้อมูลด้านความปลอดภัย

Always prioritize safety when operating remote-controlled vehicles. Failure to follow safety guidelines can result in injury or damage to property.

• ควรใช้งานรถบังคับวิทยุในพื้นที่โล่ง ห่างจากผู้คน สัตว์ และสิ่งกีดขวาง
• Ensure all batteries are fully charged and properly installed before each use.
• Perform pre-flight checks to confirm all controls are functioning correctly.
• Never operate the transmitter if you are tired, under the influence of substances, or distracted.
• Keep the transmitter and receiver away from moisture, extreme temperatures, and direct sunlight.
• Children should only operate RC models under direct adult supervision.

3. เนื้อหาบรรจุภัณฑ์

โปรดตรวจสอบว่ารายการทั้งหมดที่ระบุไว้ด้านล่างมีอยู่ในแพ็คเกจของคุณหรือไม่:

• 1 x ET07 Radio Transmitter
• 1 x RF207S Receiver (RF201S optional, RF207S by default)
• 1 x WFLY Neck Strap
• 1 x เล่มtagสายตรวจสอบอี
• 1 x Set of Stick/Rocker Accessories
• 1 x คู่มือ File (เอกสารนี้)

4. สินค้าหมดview

The WFLY ET07 is a sophisticated 10-channel RC radio transmitter designed for various RC models, including airplanes, gliders, and quadcopters. It features a user-friendly touch color screen and advanced transmission technology.

4.1. Transmitter Components

4.2. คุณสมบัติหลัก

• 10 ช่อง: มีตัวเลือกการควบคุมที่ครอบคลุมสำหรับโมเดลที่ซับซ้อน
• Touch Color Panel TFT: A large 3.5-inch (480*320) industrial-grade screen with fast response, readable outdoors.
• Frequency-Hopping Spread Spectrum (FHSS): Features two-way transmission with 64-point frequency hopping and 3.6ms flash frequency hopping for reliable communication.
• หน่วยความจำรุ่น: Stores settings for up to 20 different models.
• Two-Way Transmission: Supports trainer and student modes for learning and instruction.
• Voice and Vibration Reminders: Provides audible and tactile alerts for important events.
• Three-Color LED Status Display: Visual indicators for operational status.
• Reverse Insertion Protection: Safeguards against incorrect battery installation.
• 5 Sets of Program Mixes: Allows for advanced control configurations.
• W.BUS/S.BUS/PPM Support: Compatible with various receiver protocols.
• USB Online Update: Firmware can be updated via USB (Windows platform only).
• สำเนาไร้สาย: Easily transfer model settings between transmitters.
• Receiver Port Setting: Customizable receiver port configurations.
• Wheel Menu Button: Intuitive navigation through menus.
• Internal WFLY Protocol System: Ensures seamless integration with WFLY receivers.
• Telemetry Support: Provides real-time data feedback from the model (protocol and receiver dependent).

5. การตั้งค่าเริ่มต้น

5.1. การเปิด/ปิดเครื่อง

• เปิดเครื่อง: Ensure the battery is correctly installed. Press and hold the power button until the screen illuminates.
• หมดแรง: Press and hold the power button until the shutdown sequence completes.

5.2. Receiver Binding

To establish communication between your ET07 transmitter and a WFLY receiver (e.g., RF207S/RF201S), follow the binding procedure outlined in your receiver's specific manual. Generally, this involves:

1. Power on the transmitter and navigate to the binding menu.
2. Place the receiver in binding mode (usually by pressing a bind button while powering on or shortly after).
3. Confirm successful binding on both the transmitter screen and the receiver's LED indicator.

5.3. Model Creation and Selection

The ET07 supports storing up to 20 models. Use the touch screen and wheel menu button to create new models or select existing ones. Configure parameters such as channel assignments, servo directions, and control mixes for each model.

5.4. USB Online Upgrade

The transmitter firmware can be updated via USB. This feature is supported only on the Windows platform. Connect the transmitter to your computer using a USB cable and follow the instructions provided by WFLY's official software for the upgrade process.

6. การใช้งานเครื่องส่งสัญญาณ

6.1. อินเทอร์เฟซหน้าจอสัมผัส

The ET07 features a responsive touch screen for easy navigation and parameter adjustment. You can interact with the menus by touching the screen or using the physical wheel menu button.

6.2. Channel Control and Resolution

The ET07 provides 10 full 4096 resolution linear channels, ensuring a smooth operating experience and ultra-high resolution data output for precise control of your RC model.

6.3. Frequency-Hopping Spread Spectrum (FHSS)

The ET07 utilizes advanced FHSS technology for robust and interference-resistant communication. This system employs 64-point frequency hopping and a rapid 3.6ms flash frequency hopping rate, ensuring a stable link between the transmitter and receiver.

6.4. Dual W.BUS Expansion

For advanced setups where normal ports may not suffice, the ET07 supports Dual W.BUS mode, allowing for expanded connectivity and control options.

6.5. Trainer and Student Mode

The ET07 supports a two-way transmission system for trainer and student mode. This allows an experienced pilot (trainer) to connect their transmitter to a beginner's transmitter (student), enabling safe and guided flight instruction.

7. การบำรุงรักษา

• การทำความสะอาด: Use a soft, dry cloth to clean the transmitter. Avoid using harsh chemicals or solvents.
• พื้นที่จัดเก็บ: Store the transmitter in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
• การดูแลแบตเตอรี่ Follow the manufacturer's guidelines for charging and discharging the transmitter battery. Do not overcharge or deep discharge.
• การตรวจสอบ: Periodically check all switches, gimbals, and connections for any signs of wear or damage.

8 การแก้ไขปัญหา

• ไม่มีไฟฟ้า: Ensure the battery is fully charged and correctly inserted. Check for any physical damage to the battery or power port.
• No Signal/Binding Issues: Re-attempt the binding procedure as described in Section 5.2. Ensure the receiver is powered and within range. Check for potential interference sources.
• การควบคุมไม่ตอบสนอง: Verify that the correct model is selected on the transmitter. Check servo connections and calibration in the model settings.
• ปัญหาหน้าจอ: If the touch screen is unresponsive, try restarting the transmitter. If issues persist, consider a firmware update (Section 5.4).
• ระยะสั้น: Ensure the antenna is properly positioned and not obstructed. Check for local radio interference.

9. ข้อมูลจำเพาะ

10. เคล็ดลับผู้ใช้

• ฝึกฝนให้ชำนาญ: Familiarize yourself with the transmitter's controls and menu system in a safe environment before operating your RC model.
• อัปเดตเฟิร์มแวร์ปกติ: Check the WFLY official webไซต์อัปเดตเฟิร์มแวร์เป็นระยะเพื่อให้มั่นใจถึงประสิทธิภาพที่ดีที่สุดและการเข้าถึงฟีเจอร์ใหม่ ๆ
• การตั้งค่ารุ่น: Take your time setting up each model. Double-check all channel assignments, servo directions, and control throws to prevent unexpected behavior during flight.
• การจัดการแบตเตอรี่: Always monitor your transmitter's battery level and charge it before it gets too low to avoid unexpected power loss during operation.

11. การรับประกันและการสนับสนุน

For warranty information, technical support, or service inquiries, please refer to the official WFLY webหรือติดต่อตัวแทนจำหน่ายที่ได้รับอนุญาต เก็บใบเสร็จรับเงินไว้เป็นหลักฐานการซื้อสำหรับการเรียกร้องการรับประกันใดๆ