1. ข้อมูลด้านความปลอดภัยที่สำคัญ
โปรดอ่านคำเตือนและคำแนะนำด้านความปลอดภัยทั้งหมดก่อนใช้ผลิตภัณฑ์นี้ การไม่ปฏิบัติตามคำเตือนและคำแนะนำอาจส่งผลให้เกิดไฟฟ้าช็อต ไฟไหม้ และ/หรือบาดเจ็บสาหัส
- Submersion Requirement: This pool vacuum cleaner must be completely submerged in water during operation. Operating it out of water can damage the motor.
- ความปลอดภัยของแบตเตอรี่: Use only the charger provided by the manufacturer. Do not attempt to open, modify, or damage the battery pack. Do not expose batteries to fire or high temperatures.
- เด็กและสัตว์เลี้ยง: Keep the appliance out of reach of children and pets. This is not a toy.
- อุณหภูมิของน้ำ: Do not use the vacuum in water exceeding 35°C (95°F) or below 4°C (39°F).
- สารเคมี: Avoid using the vacuum immediately after adding pool chemicals. Allow chemicals to circulate and dissipate first.
- การตรวจสอบ: Before each use, inspect the vacuum for any damage to the housing, filter, or charging port. Do not use if damaged.
2. เนื้อหาบรรจุภัณฑ์
โปรดตรวจสอบให้แน่ใจว่าสินค้าทั้งหมดที่ระบุไว้ด้านล่างอยู่ในบรรจุภัณฑ์ของคุณ หากมีชิ้นส่วนใดขาดหายหรือเสียหาย โปรดติดต่อฝ่ายบริการลูกค้า
- Swolace Handheld Pool Vacuum (Main Unit)
- Rechargeable Lithium Polymer Battery (Pre-installed or separate, 2 included)
- อะแดปเตอร์ชาร์จไฟ
- Filter Bag/Cartridge
- Telescopic Pole (or attachment for standard pole)
- คู่มือการใช้งาน
Image description: An illustration showing all components of the Swolace PJV30 handheld pool vacuum laid out, including the main vacuum body, filter, charging cable, and pole attachment. This image helps users identify all parts upon unboxing.
3. คำแนะนำในการประกอบ
The Swolace PJV30 requires some assembly before first use. Follow these steps carefully.
- ติดตั้งตัวกรอง: Open the filter compartment on the main vacuum unit. Insert the filter bag or cartridge, ensuring it is seated correctly. Close the compartment securely.
- Connect the Pole: If using a telescopic pole, attach it to the designated connector on the vacuum head. Ensure it clicks into place or is tightened firmly. If using your own standard pole, attach the provided adapter first, then connect your pole.
- Battery Installation (if separate): If the batteries are not pre-installed, open the battery compartment, insert the two Lithium Polymer batteries according to the polarity markings, and close the compartment securely.
Image description: A sequence of three images demonstrating the assembly steps: 1) Inserting the filter into the vacuum head. 2) Attaching the telescopic pole to the vacuum unit. 3) (If applicable) Installing the battery pack into its compartment. Each image clearly shows the connection points.
4. การชาร์จแบตเตอรี่
Before initial use, fully charge the vacuum's battery. A full charge takes approximately 2 hours.
- ค้นหาพอร์ตการชาร์จ: Find the charging port on the vacuum unit. Ensure it is dry before connecting the charger.
- เชื่อมต่อเครื่องชาร์จ: Plug the charging adapter into a standard electrical outlet. Connect the other end of the adapter to the vacuum's charging port.
- ไฟแสดงสถานะการชาร์จ: The charging indicator light will illuminate (e.g., red for charging, green for fully charged).
- การตัดการเชื่อมต่อ: Once fully charged, disconnect the charger from both the vacuum and the power outlet.
Image description: An image showing the Swolace PJV30 pool vacuum connected to its charging adapter, with the charging port and indicator light clearly visible. The image emphasizes the correct connection method.
5. คู่มือการใช้งาน
Follow these steps for effective and safe operation of your Swolace PJV30 handheld pool vacuum.
- เตรียมสระว่ายน้ำ: Ensure the pool water level is adequate and free of large debris that could clog the vacuum.
- จุ่มสูญญากาศลงไป: Slowly lower the assembled vacuum into the pool water until it is completely submerged. Important: The vacuum must be fully submerged before turning it on.
- เปิดใช้งานเครื่องดูดฝุ่น: Locate the power switch (usually near the handle) and turn the vacuum ON. You should hear the motor start and feel suction.
- เริ่มทำความสะอาด: Guide the vacuum along the bottom and sides of your pool, moving slowly to allow the vacuum to pick up debris effectively.
- Monitor Filter: If suction decreases, the filter may be full. Turn off the vacuum, remove it from the water, and clean the filter.
- เสร็จสิ้นการทำความสะอาด: Once cleaning is complete or the battery runs low, turn the vacuum OFF.
- Remove from Water: Carefully lift the vacuum out of the water. Allow excess water to drain.
Image description: A user demonstrating the Swolace PJV30 pool vacuum in an above-ground pool. The vacuum is fully submerged and being guided along the pool floor, illustrating proper operating technique.
6. การบำรุงรักษา
Regular maintenance ensures optimal performance and extends the lifespan of your Swolace PJV30 pool vacuum.
- ทำความสะอาดตัวกรอง: After each use, remove the filter bag/cartridge and rinse it thoroughly with a garden hose. Ensure all debris is removed. Allow it to air dry completely before reinserting or storing.
- Rinse the Unit: Rinse the main vacuum unit with fresh water after each use to remove any pool chemicals or debris. Do not use harsh detergents.
- ตรวจสอบความเสียหาย: Periodically check the vacuum for any signs of wear or damage, especially to seals, the charging port cover, and the pole connection.
- พื้นที่จัดเก็บ: Store the vacuum in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the battery is partially charged (not fully depleted or fully charged for long-term storage).
Image description: A user cleaning the filter bag of the Swolace PJV30 pool vacuum under running water, showing how to effectively remove trapped debris. Another image shows the vacuum stored in a dry, shaded area.
7 การแก้ไขปัญหา
โปรดดูตารางนี้เพื่อดูปัญหาทั่วไปและวิธีแก้ไข
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| เครื่องดูดฝุ่นไม่เปิด | แบตเตอรี่หมด สวิตช์ไฟปิดอยู่ แบตเตอรี่ไม่ได้ติดตั้งอย่างถูกต้อง | ชาร์จแบตเตอรี่เป็นเวลา 2 ชั่วโมง ตรวจสอบให้แน่ใจว่าสวิตช์ไฟอยู่ในตำแหน่งเปิด Check battery installation and compartment closure. |
| การดูดที่อ่อนแอ | ถุงกรองเต็มหรืออุดตันแล้ว Debris blocking the intake. แบตเตอรี่เหลือน้อย | Clean the filter bag thoroughly. Remove any visible debris from the intake nozzle. ชาร์จแบตเตอรี่ |
| สูญญากาศจะหยุดในระหว่างการทำงาน | แบตเตอรี่หมด เปิดใช้งานการป้องกันความร้อนสูงเกินไป | ชาร์จแบตเตอรี่ Turn off the vacuum, remove from water, and allow it to cool down for 30 minutes before restarting. |
| มีน้ำรั่วออกจากตัวเครื่อง | Seals are damaged or improperly seated. ฝาปิดพอร์ตชาร์จไม่ได้ปิดผนึก | Inspect and reseat all seals. If damaged, contact support for replacement parts. Ensure the charging port cover is firmly closed. |
8. ข้อมูลจำเพาะ
Key technical specifications for the Swolace PJV30 Handheld Pool Vacuum.
| คุณสมบัติ | ข้อมูลจำเพาะ |
|---|---|
| ชื่อรุ่น | PJV30 |
| ยี่ห้อ | Swolace |
| แหล่งพลังงาน | แบตเตอรี่ลิเธียมโพลิเมอร์แบบชาร์จไฟได้ |
| ประเภทแบตเตอรี่ | แบตเตอรี่ลิเธียมโพลิเมอร์ 2 ก้อน (รวมอยู่ด้วย) |
| ความจุของแบตเตอรี่ | 4500mAh (implied from description) |
| ปริมาณพลังงานแบตเตอรี่ลิเธียม | 33.3 วัตต์ชั่วโมง |
| จำนวนเซลล์ลิเธียมไอออน | 2 |
| เวลาในการชาร์จ | 2 ชั่วโมง |
| จำเป็นต้องประกอบ | ใช่ |
| ยูพีซี | 721545447692 |
| ผู้ผลิต | Ningbo Powerful Pool Equipment Co., Ltd |
9. การรับประกันและการสนับสนุน
Swolace products are manufactured to high-quality standards. This product comes with a limited warranty against defects in materials and workmanship under normal use.
- ระยะเวลารับประกัน: Please refer to the warranty card included in your package or visit the official Swolace website for specific warranty duration and terms.
- ขั้นตอนการเรียกร้อง: To make a warranty claim, you may be required to provide proof of purchase and the product's serial number.
- การสนับสนุนลูกค้า: For technical assistance, troubleshooting, or warranty inquiries, please contact Swolace customer support.
ข้อมูลติดต่อ:
Webเว็บไซต์: Visit the Swolace Store on Amazon (สำหรับสอบถามข้อมูลทั่วไปและข้อมูลผลิตภัณฑ์)
Email: Refer to your product packaging or warranty card.
Phone: Refer to your product packaging or warranty card.