1. สินค้าหมดview
The Haozee HZ-SL06 Intelligent Soil Moisture Sensor is designed to assist with plant care by accurately measuring ambient temperature and soil moisture levels. This capacitive sensor provides essential data for maintaining optimal growing conditions in various environments such as greenhouses, gardens, and lawns. It requires a Zigbee gateway or Zigbee2MQTT Home Assistant for data reading and integration into smart home systems.
2. การตั้งค่าและการติดตั้ง
2.1 เนื้อหาบรรจุภัณฑ์
- 1 x Haozee HZ-SL06 Soil Moisture Sensor
2.2 การติดตั้งแบตเตอรี่
The sensor requires two LR03 AAA batteries (not included). Follow these steps to install the batteries:
- Gently open the top cover of the sensor.
- Insert two LR03 AAA batteries, ensuring correct polarity.
- ปิดฝาด้านบนให้แน่น
2.3 ข้อกำหนดของฮับ Zigbee
This soil tester must be used with a Zigbee gateway or the Zigbee2MQTT Home Assistant. Without a compatible hub, the product cannot read or transmit data. Ensure your Zigbee hub is properly set up and connected before attempting to use the sensor.
2.4 การวางตำแหน่งเซ็นเซอร์
For accurate measurements, at least two-thirds of the soil moisture sensor probe should be submerged into the soil. Avoid fully submerging the entire device, especially the battery compartment.
3. คู่มือการใช้งาน
3.1 การตรวจสอบข้อมูลแบบเรียลไทม์
Once connected to your Zigbee hub, the sensor provides real-time detection of soil moisture, air temperature, and humidity values. This data can be viewed through your connected smart home application.
3.2 Soil Moisture Reporting
The sensor reports soil moisture data approximately 30 seconds after insertion into the soil. The reporting interval can be configured from 0 seconds to 1 minute, depending on your smart home system settings.
3.3 การควบคุมระยะไกลผ่านแอป
Utilize the smart home application to remotely monitor air temperature, humidity, and soil moisture at any time and from anywhere. This allows for proactive plant care and integration with other smart devices, such as intelligent watering timers.
3.4 โหมดการปรับเทียบ
The sensor supports a calibration mode for soil humidity. Refer to your specific Zigbee hub or Home Assistant documentation for instructions on how to access and adjust calibration settings for optimal accuracy.
3.5 การแปลงหน่วยอุณหภูมิ
You can choose your preferred temperature reading unit, Fahrenheit (°F) or Celsius (°C), within the connected smart home application settings.
3.6 การแจ้งเตือนแบตเตอรี่เหลือน้อย
The smart home application will provide a low battery reminder when the power is critically low, ensuring continuous operation. You can check the remaining battery power at any time through the app.
4. การบำรุงรักษา
4.1 การทำความสะอาดเซ็นเซอร์
The surface of the soil moisture sensor probe must be kept clean before and during use. Regularly wipe the probe with a soft, damp cloth to remove any soil residue or debris that could affect measurement accuracy.
4.2 การเปลี่ยนแบตเตอรี่
When the low battery reminder appears, replace the two LR03 AAA batteries as described in Section 2.2. Ensure the device is powered off before replacing batteries.
4.3 ระดับการกันน้ำ
The sensor is designed to withstand watering from the top. However, it is not intended to be soaked or fully submerged in water. Avoid prolonged exposure to standing water to prevent damage to internal components.
5 การแก้ไขปัญหา
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| No data reading in app | Sensor not connected to Zigbee hub; Batteries low or incorrectly installed; Sensor probe not sufficiently submerged. | Ensure Zigbee hub is active and sensor is paired. Check battery levels and installation. Submerge at least two-thirds of the sensor probe into the soil. |
| การอ่านที่ไม่ถูกต้อง | Sensor probe is dirty; Calibration required; Environmental interference. | Clean the sensor probe. Perform soil humidity calibration via the app. Ensure no strong electromagnetic interference nearby. |
| Sensor disconnects frequently | Weak Zigbee signal; Low battery. | Move sensor closer to the Zigbee hub or use a Zigbee repeater. Replace batteries. |
6. ข้อมูลจำเพาะ
| คุณสมบัติ | รายละเอียด |
|---|---|
| แบบอย่าง | HZ-SL06 |
| ยี่ห้อ | เฮาซี |
| ขนาดสินค้า | ขนาด 0.79 นิ้ว กว้าง x 1.97 นิ้ว สูง (2 ซม. x 5 ซม.) |
| น้ำหนักสินค้า | 0.03 กิโลกรัม |
| ประเภทแบตเตอรี่ | 2 x LR03 AAA batteries (not included) |
| Upper Temperature Range | 58 องศาเซลเซียส |
| ความแม่นยำของอุณหภูมิ | ±0.5 Degrees Celsius |
| การเชื่อมต่อ | Zigbee (Hub Required) |
| วัสดุ | พีซีและ ABS |
7. คู่มือวิดีโอ
7.1 What is the soil moisture Zigbee?
วิดีโอนี้มีเนื้อหาเกี่ยวกับview of the Haozee Intelligent Soil Moisture Sensor, explaining its features and how it integrates with a Zigbee hub for smart garden management.
8. ข้อมูลการรับประกัน
Haozee products are covered by a standard manufacturer's warranty. For specific details regarding warranty duration and terms, please refer to the product packaging or contact customer support. Keep your purchase receipt as proof of purchase for any warranty claims.
9. การสนับสนุนลูกค้า
For technical assistance, troubleshooting, or general inquiries about your Haozee HZ-SL06 Intelligent Soil Moisture Sensor, please contact Haozee customer support. Contact information can typically be found on the official Haozee webบรรจุภัณฑ์ไซต์หรือผลิตภัณฑ์