Beatbot Sora 70 Robotic Pool Cleaner Instruction Manual

1. สินค้าหมดview

About the Beatbot Sora 70

The Beatbot Sora 70 is an advanced 4-in-1 robotic pool cleaner designed for comprehensive pool maintenance. It efficiently cleans the pool floor, walls, waterline, and surface, including shallow areas. Equipped with a powerful suction system and intelligent navigation, it ensures a thorough cleaning experience for both above-ground and in-ground pools up to 300 m².

คุณสมบัติหลัก

• Complete Pool Coverage: Cleans the entire pool, including floor, walls, waterline, surface, and shallow areas (from 20 cm depth).
• Advanced Surface Cleaning: Features the JetPulse system with two water jets creating four powerful streams to direct debris like leaves, insects, and pollen into the suction inlet.
• พลังดูดสูง: 25700 LPH (Liters Per Hour) suction power with HydroBalance structure for efficient debris capture without clogging.
• Intelligent Surface Parking: Automatically returns to the surface, parks at the pool edge, and drains water for easy retrieval. Can be retrieved with a single touch via the Beatbot app.
• Extended Cleaning Cycle: 10000 mAh high-capacity battery provides up to 5 hours of continuous floor cleaning, covering up to 300 m² on a single charge.
• 6-Liter Debris Capacity: Large filter basket for uninterrupted cleaning.

2. คำแนะนำด้านความปลอดภัยที่สำคัญ

Read all instructions carefully before using the Beatbot Sora 70. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always ensure the power adapter is disconnected from the power outlet before performing any maintenance or cleaning on the robot.
• Do not operate the robot if the power cable or plug is damaged.
• Keep the robot and its charging components away from children and pets.
• Use only the original power adapter and accessories provided by Beatbot.
• Do not use the robot if the pool water temperature is outside the recommended range (typically 10°C to 35°C).
• Ensure the robot is fully submerged before starting operation.
• Do not attempt to repair the robot yourself. Contact authorized service personnel for repairs.
• Avoid using the robot in pools with extreme chemical imbalances, as this may damage the device.

3. การเริ่มต้น

มีอะไรอยู่ในกล่อง

ตรวจสอบว่าส่วนประกอบทั้งหมดอยู่ครบและอยู่ในสภาพดีเมื่อเปิดบรรจุภัณฑ์

• Beatbot Sora 70 Robotic Pool Cleaner × 1
• ที่ชาร์จ× 1
• Retrieval Hook × 1
• คู่มือการใช้งาน× 1
• คู่มือการเริ่มต้นฉบับย่อ × 1
• 6L Filter Basket with 150 µm filter × 1

Image: Contents of the Beatbot Sora 70 package.

การชาร์จเบื้องต้น

Before first use, fully charge the Beatbot Sora 70. The robot features fast and secure charging with titanium contacts.

1. เสียบที่ชาร์จเข้ากับเต้ารับไฟฟ้า
2. Connect the charging cable to the robot's charging port.
3. Allow approximately 4.5 hours for a full charge. The indicator light on the robot will change to indicate charging status.

Image: Beatbot Sora 70 charging by the pool. Charging takes approximately 4.5 hours.

4. การตั้งค่าอุปกรณ์

Connecting to the Beatbot App

The Beatbot app provides intelligent control and monitoring of your Sora 70.

1. Download the Beatbot app from your smartphone's app store.
2. Follow the in-app instructions to pair your Sora 70 robot.
3. Once connected, you can select cleaning modes, monitor cleaning progress, and control the robot remotely when it is on the surface.

Image: Controlling the Beatbot Sora 70 via the Beatbot app.

การวางหุ่นยนต์ลงในสระน้ำ

Carefully place the robot into the pool water.

• Hold the robot by its handle and gently lower it into the water.
• Ensure the robot is fully submerged and air bubbles have escaped before starting a cleaning cycle.

5. การดำเนินการ

โหมดการทำความสะอาด

The Beatbot Sora 70 offers six intelligent cleaning modes to suit various needs. These modes can be selected via the Beatbot app.

• โหมดตั้งพื้น: Focuses on cleaning the pool floor.
• โหมดพื้นผิว: Utilizes the JetPulse system for surface debris removal.
• Shallow Beach Mode: Specifically designed for cleaning shallow areas and submerged steps (available soon).
• โหมดโปร: Advanced cleaning for comprehensive coverage.
• โหมดมาตรฐาน: General cleaning for typical pool conditions.
• โหมดอีโค: Energy-efficient cleaning for lighter debris.

Image: Six intelligent cleaning modes available for the Beatbot Sora 70.

JetPulse Surface Cleaning System

The innovative JetPulse system uses two water jets to create four dynamic water flows, guiding surface debris directly into the suction inlet for efficient cleaning.

Image: The JetPulse system in action, demonstrating advanced surface cleaning.

Intelligent Surface Parking and Retrieval

The Sora 70 automatically returns to the surface and parks at the pool edge when cleaning is complete or the battery is low. It then drains water to facilitate easy retrieval, eliminating the need to lift heavy equipment.

Image: Intelligent surface parking and simple retrieval process.

AI-Optimized Navigation

The robot uses AI-optimized S-path navigation for complete and seamless cleaning coverage of the pool floor.

Image: AI-optimized S-path navigation for thorough pool cleaning.

Adaptive Pool Dimension Recognition

The Sora 70 precisely detects pool dimensions, enabling intelligent route planning for complete and meticulous cleaning.

Image: Adaptive pool dimension recognition using AI.

Smart Control via Beatbot App

The Beatbot app allows you to:

• Select from six intelligent cleaning modes.
• Monitor cleaning progress in real-time.
• Control the Sora 70 remotely when it is on the surface.
• Receive Over-The-Air (OTA) software updates.

6. การดูแลรักษา

การทำความสะอาดตัวกรอง

Regular cleaning of the filter basket is crucial for maintaining optimal cleaning performance and preventing interruptions.

1. Remove the robot from the pool and place it on a clean, flat surface.
2. Open the robot's cover to access the filter basket.
3. Remove the 6-liter filter basket.
4. Empty the collected debris.
5. ล้างตะกร้ากรองให้สะอาดด้วยสายยางเพื่อกำจัดอนุภาคขนาดเล็กออกไป
6. Ensure the filter is completely clean before reinserting it into the robot.
7. Close the robot's cover securely.

Image: Filter cleaning process, showing the 150 µm filter and common debris types.

การทำความสะอาดทั่วไป

• เช็ดทำความสะอาดภายนอกของหุ่นยนต์ด้วยผ้าเนื้อนุ่มและแห้งamp ผ้าหลังการใช้แต่ละครั้ง
• Inspect the brushes and tracks for any trapped debris or wear. Clean as necessary.
• ควรเก็บหุ่นยนต์ไว้ในที่แห้งและเย็น หลีกเลี่ยงแสงแดดโดยตรงเมื่อไม่ได้ใช้งาน

7. คำแนะนำการแก้ไขปัญหา

If you encounter issues with your Beatbot Sora 70, refer to the following common solutions:

If the problem persists, please contact Beatbot customer support.

8. ข้อมูลจำเพาะทางเทคนิค

9. การรับประกันและการสนับสนุนลูกค้า

ข้อมูลการรับประกัน

The Beatbot Sora 70 comes with a 3-year protection warranty, ensuring peace of mind for your investment. This warranty covers manufacturing defects and ensures the product's quality and durability.

Image: 3-year protection warranty.

ติดต่อฝ่ายสนับสนุน

For technical assistance, warranty claims, or any questions regarding your Beatbot Sora 70, please contact Beatbot customer support through the official webไซต์หรือข้อมูลการติดต่อที่ระบุไว้ในคู่มือเริ่มต้นใช้งานฉบับย่อของคุณ