Carpuride W603DT Motorcycle CarPlay Screen Instruction Manual

การแนะนำ

This manual provides detailed instructions for the installation, operation, and maintenance of your Carpuride W603DT Motorcycle CarPlay Screen. This device integrates wireless CarPlay, Android Auto, a TPMS system, and a dual dash cam, designed to enhance your riding experience with navigation, communication, and safety features.

เนื้อหาแพ็คเกจ

• W603DT Moto Carplay Screen (1)
• Front Camera (1); Rear Camera (1); 64GB TF Card (1)
• Tire Pressure Sensors (2); Sunshade (1); Wired Controller (1)
• Square Bracket (1); Extension Rod Bracket (1); Silicone Gasket (4)
• คู่มือการใช้งาน (1)
• Power Cable (1); USB Cable (1)

ภาพ: เหนือview of the Carpuride W603DT package contents, showing the main screen, front and rear cameras, TPMS sensors, wired controller, various mounting brackets, power cables, USB cable, 64GB TF card, and user manual.

การติดตั้งและการตั้งค่า

1. การติดตั้งขายึด

1. Choose the appropriate thickness of silicone pads based on your motorcycle handlebar diameter (12mm, 22mm, 25.4mm, or 28mm). Stack them for added thickness if needed.
2. ใช้ไขควงปากแฉกยึดตัวยึดโลหะเข้ากับแฮนด์จักรยาน
3. Clamp the connecting rod to the metal mount.
4. Insert the device and adjust its position as desired. Tighten the adjustment ring to secure.
5. Installation is complete. The ball tip can be removed from the bracket for separate installation if preferred.

Image: Visual guide demonstrating five steps for installing the Carpuride W603DT mounting brackets onto a motorcycle handlebar, including selecting silicone pads, attaching the mount, clamping the rod, inserting the device, and securing it.

2. การเชื่อมต่อสายไฟ

Connect the power cord, front camera, rear camera, and wired controller to the main unit. The power supply connects directly to the motorcycle battery:

• Connect the red power wire to the motorcycle battery positive terminal (ACC).
• Connect the black ground wire to the motorcycle battery negative terminal.
• The Type-C port on the W603DT is for manufacturer debugging only and does not support powering the screen.

Image: Diagram illustrating the wiring connections for the Carpuride W603DT, showing how to connect the power cord, front camera, rear camera, and wired controller to the main unit and the motorcycle battery.

3. TPMS Sensor Setup

1. Open Settings on the device and check the software version to confirm TPMS support.
2. Navigate to the tire pressure monitoring interface, switch to the correct vehicle mode (e.g., 2-wheeled motorcycle).
3. Bind all current sensors by entering the sensor pairing codes.
4. Set custom alarm values for tire pressure if desired.

Image: A four-step visual guide for TPMS pairing, showing the device interface for checking firmware, selecting vehicle type, entering sensor codes, and setting alarm values.

Installing TPMS Sensors:

1. Screw out the valve cap from your tire.
2. Rotate the nut counter-clockwise onto the valve stem.
3. Check for air leakage with soapy water after installation.

Image: Three-step diagram illustrating how to install the external tire pressure monitoring system (TPMS) sensors onto a motorcycle tire valve, including removing the valve cap, rotating the nut, and checking for leaks.

4. การเชื่อมต่อ CarPlay แบบไร้สาย

1. Open the CarPlay application on the W603DT screen.
2. On your iPhone, search for the Bluetooth device "carpuride-xxxx" and pair.
3. Click "Allow" and "Use CarPlay" on your iPhone when prompted.
4. The connection is successful when CarPlay appears on the screen.

ข้อกำหนดสำหรับ CarPlay แบบไร้สาย: An iPhone running iOS 6 or above. CarPlay system and iPhone's voice system must be turned on. Ensure Siri is enabled.

Image: A four-step visual guide demonstrating how to connect an iPhone to the Carpuride W603DT for wireless Apple CarPlay, showing the screen interface and phone prompts.

5. การเชื่อมต่ออัตโนมัติของ Android แบบไร้สาย

1. Open the Android Auto application on the W603DT screen.
2. On your Android phone, find connected devices in Bluetooth settings.
3. Add new device "carpuride-xxxx" and click "Pair".
4. The connection is successful when Android Auto appears on the screen.

ข้อกำหนดสำหรับ Android Auto ไร้สาย: A phone that supports 5GHz Wi-Fi, running Android 11 or above, and supports the Android Auto app (ensure it's updated to the latest version).

Image: A four-step visual guide demonstrating how to connect an Android phone to the Carpuride W603DT for wireless Android Auto, showing the screen interface and phone prompts.

6. Bluetooth Audio Setup

To use Bluetooth audio for calls and music:

1. Connect your phone to your Bluetooth headset or helmet.
2. Ensure your phone is connected to the W603DT via Bluetooth (for CarPlay/Android Auto).
3. Enter CarPlay or Android Auto. Audio and calls will route through your Bluetooth headset or helmet.

บันทึก: Make sure your Bluetooth headset or helmet has microphones for phone calls and voice controls.

Image: Diagram illustrating the Bluetooth audio connection process, where the phone connects to the Carpuride W603DT via Wi-Fi for CarPlay/Android Auto, and simultaneously to a Bluetooth headset or helmet for audio output.

คำแนะนำการใช้งาน

1. คุณสมบัติหน้าจอ

• หน้าจอสัมผัส IPS HD ขนาด 6.3 นิ้ว: Provides a clear and vibrant display with 1560x720 resolution and up to 1000nit brightness for visibility in direct sunlight.
• Rotatable Screen: The screen can be rotated to portrait or landscape orientation. When rotating, the device will automatically shut down and restart for 5-8 seconds.

Image: Illustration of the rotatable screen feature, showing the Carpuride W603DT display switching between landscape and portrait modes, particularly useful for navigation.

Image: Visual representation of the screen's performance in different lighting conditions, including rainy, sunny, and snowy days, highlighting its HD, IPS, 2.5D curved screen, and 1000 Nit brightness features.

2. Dual Dash Cam (DVR) Operation

• Equipped with HD 1080P 30FPS 140° wide-angle front and rear cameras.
• Supports split-screen functionality for simultaneous display of front and rear views.
• Includes a 64GB TF card for storage. Features loop recording, automatically deleting older videos when full to continue recording.

Image: Visual demonstration of the dual dash cam feature, showing 1080P front and rear camera views, 140-degree wide angle, and split-screen display for simultaneous monitoring.

Image: Graphic depicting the loop-cycle recording function, showing a sequence of recorded video clips and the 64GB TF card for storage.

3. ฟังก์ชั่นตัวควบคุมแบบมีสาย

The wired controller allows for quick access to various functions:

• ปุ่มวงจร: Switch between rear camera screen, home page, and current interface.
• ปุ่มรูปภาพ: ถ่ายภาพ.
• ปุ่มโฮม: Lock up video.
• บันทึก: When using an Android phone connected to the W603DT, the cycle button does not support answering incoming calls.

Image: Close-up of the wired controller mounted on a motorcycle handlebar, highlighting the "Cycle button", "Photo button", and "Home button" with their respective functions.

4. Voice Control and Navigation

• Supports voice control (Google Voice or Siri) for hands-free operation.
• Access navigation apps like Apple Maps, Google Maps, Waze, HERE Maps, and Sygic directly on the screen.
• Make and receive calls, listen to music, and send messages using voice commands.

Image: Visual showing a rider using voice commands (Hey Siri, OK Google) for navigation and music playback on the Carpuride W603DT screen.

Image: Display of various navigation applications (Apple Maps, Waze, Google Maps, HERE Maps, Sygic) accessible on the Carpuride W603DT screen while mounted on a motorcycle.

การซ่อมบำรุง

• การทำความสะอาด: ใช้แบบนุ่มๆamp ใช้ผ้าเช็ดทำความสะอาดหน้าจอและตัวเครื่องภายนอก หลีกเลี่ยงสารเคมีรุนแรงหรือวัสดุที่มีฤทธิ์กัดกร่อน
• การอัปเดตซอฟต์แวร์: Regularly check for and install software updates to ensure optimal performance and compatibility. For example, update software if you encounter Android 16 disconnection issues.
• การปกป้องสิ่งแวดล้อม: The device is IP67 waterproof and operates in temperatures from -20°C to 80°C. While durable, avoid prolonged exposure to extreme conditions beyond specified limits.

Image: Visual representation of the Carpuride W603DT's robust design, highlighting its IP67 waterproof rating, high temperature resistance, and low temperature resistance for use in various weather conditions.

การแก้ไขปัญหา

• Android Auto Disconnection (Android 16): If you experience disconnection issues with Android 16, update the software to the latest version.
• Phone Incompatibility: The device is incompatible with Huawei phones and phones running HarmonyOS. It is only compatible with iOS 6 and above, and Android 11 and above systems.
• Screen Rotation Restart: When clicking the "Screen Rotation" button, the device will automatically shut down and restart for 5-8 seconds. This is normal operation; please be patient.
• Camera Orientation: If the camera display is reversed, loosen the screws, rotate the camera to the correct direction, and then tighten the screws.
• แหล่งจ่ายไฟ: The W603DT supports only one power supply method: connecting to the motorcycle battery via a power take-off wire. The Type-C port is for software debugging by the manufacturer and does not support powering the screen.
• Wired Controller Call Answering (Android): The cycle button on the wired controller does not support answering incoming calls when an Android phone is connected.

ข้อมูลจำเพาะ

การรับประกันและการสนับสนุน

Carpuride offers a รับประกัน 12 เดือน and technical support for the W603DT GPS navigator. Your satisfaction is a top priority, and Carpuride aims to provide a 100% satisfactory solution within 24 hours for any questions or concerns you may have.

Additionally, Carpuride provides a custom boot logo service. You can send desired pictures to customize the boot logo of your device.

วิดีโอสินค้า