Lepro SW1 AI Smart Outdoor LED Strip Lights (32.8ft)

การแนะนำ

This manual provides essential information for the safe and effective use of your Lepro SW1 AI Smart Outdoor LED Strip Lights. These 32.8ft IP65 waterproof RGBCW light strips offer tunable white light from 2700K to 5700K and are controlled via the Lepro app and voice commands. Please read these instructions thoroughly before installation and operation.

มีอะไรอยู่ในกล่อง

ตรวจสอบว่าส่วนประกอบทั้งหมดมีอยู่ก่อนเริ่มการติดตั้ง

• ไฟ LED Strip ขนาด 1 x 32.8 ฟุต
• 1 x 9.84ft Cable with Controller
• 1 x Wall Adapter (36V 24W)
• 12 x คลิปยึด
• 12 x Screws for Mounting
• 12 x Anchors for Mounting
• 4 x Cable Clips for Securing Power Supply & Controller
• 4 x Screws for Securing Power Supply & Controller
• 4 x Anchors for Securing Power Supply & Controller
• 1 x คู่มือผู้ใช้

ข้อมูลด้านความปลอดภัยที่สำคัญ

• This SW1 strip light is designed for outdoor use with an IP65 waterproof rating, making it dust-tight and protected from low-pressure water jets.
• The power supply (adapter) is ไม่ rated for direct outdoor exposure. It must be placed in an electrical box or a protected, dry location for safe and long-term usage.
• Do not cut the strip lights. The length should be selected to closely match your requirements, as trimming will damage the product and void the warranty.
• Ensure the installation surface is dry and clean before attaching the strip lights.
• Always use the provided screws and clips to securely fasten the adapter, controller, and light strip. Adhesive backing alone may not be sufficient for long-term outdoor installation.
• ช่วงอุณหภูมิในการทำงาน: -20°C ถึง 40°C (-4°F ถึง 104°F)

การติดตั้งและการตั้งค่า

Follow these steps for proper installation and initial setup of your LED strip lights.

1. ทดสอบไฟ: Before permanent installation, connect the strip light to the controller and power adapter, then plug it into an outlet to ensure all lights function correctly. Do not test while the strip is still rolled up.
2. เตรียมพื้นผิว: Clean the desired installation surface thoroughly to remove any dust or debris. Ensure it is dry.
3. Secure the Power Adapter: Place the power adapter in a suitable electrical box or a protected, dry outdoor location. It must not be directly exposed to weather elements.
4. รักษาความปลอดภัยของตัวควบคุม: Use the provided clips and screws to securely fasten the controller to a dry, clean surface.
5. ติดแถบ LED: Carefully peel away the backing paper from the adhesive on the light strip. Attach the strip to the cleaned surface.
6. ยึดให้แน่นด้วยคลิปหนีบ: Use the provided clips and screws to further secure the LED strip in place along its entire length. This provides additional stability and ensures long-term adhesion, especially in outdoor conditions.

การเชื่อมต่อแอพ

The Lepro SW1 strip light is controlled exclusively via the Lepro app. It is not compatible with the "Lepro Lampux" or "Smart Life" apps.

1. Download the Lepro App: ค้นหา "Lepro" in your device's app store and download the official application.
2. ลงทะเบียนบัญชี: เปิดแอปพลิเคชันและทำตามขั้นตอนเพื่อลงทะเบียนบัญชีผู้ใช้ใหม่
3. เปิดใช้งานบลูทูธและ Wi-Fi: Ensure your phone's Bluetooth is enabled and that your phone is connected to a 2.4GHz Wi-Fi network. The lights only support 2.4GHz Wi-Fi.
4. เปิดใช้งานไฟ: Plug in the strip lights to activate them.
5. เพิ่มอุปกรณ์: In the Lepro app, navigate to the homepage and click "Add Device".
6. Find SW1: The app should automatically detect the SW1 device. Select it to proceed.
7. Pair with Wi-Fi: Follow the in-app instructions to pair the device with your 2.4GHz Wi-Fi network.
8. เสร็จสิ้น: Once paired, the lights are ready for control via the app.

คำแนะนำการใช้งาน

App Control (Lepro App)

The Lepro app provides comprehensive control over your SW1 LED strip lights, offering a wide range of customization options.

• Millions of Color Options: Select from 16 million RGB colors and adjust brightness from 1-100%.
• สีขาวที่ปรับได้: Choose between 2700K warm white and 5700K cool daylight for various moods and year-round use.
• LightGPM 4 - โปรแกรมออกแบบแสงสว่างด้วย AI ที่ปรับแต่งได้เฉพาะบุคคล: This feature learns your preferences and suggests lighting designs. The more you use it, the more tailored the lighting effects become.
• Take a Photo, Get the Vibe: Upload an image (e.g., a room photo, movie poster) to the app, and LightGPM will generate a lighting design that matches the image's colors and mood.
• LightBeats Music Sync: Sync your lights with music played through your phone's microphone for dynamic lighting effects. Keep the music sync page active and the phone screen on for continuous operation.

การควบคุมด้วยเสียง

The Lepro SW1 lights are compatible with Amazon Alexa and Google Assistant for hands-free control.

• Easy Voice Commands: Use simple voice commands to change colors, adjust brightness, or activate specific lighting themes. For example, say "Alexa, turn on the strip lights" or "Hey Google, set the lights to blue."
• ไม่ต้องใช้ฮับ: Direct connection via 2.4GHz Wi-Fi to the Lepro app enables voice control without an additional hub.

การซ่อมบำรุง

Proper maintenance ensures the longevity and performance of your Lepro SW1 LED Strip Lights.

• การทำความสะอาด: Periodically wipe the strip lights with a soft, damp ผ้าเพื่อขจัดสิ่งสกปรกและเศษขยะ หลีกเลี่ยงการใช้สารเคมีที่รุนแรงหรือน้ำยาทำความสะอาดที่มีฤทธิ์กัดกร่อน
• ตรวจสอบการเชื่อมต่อ: Regularly check the power adapter, controller, and strip connections for any signs of wear, damage, or loose fittings. Ensure the power adapter remains protected in an electrical box.
• การติดตั้งที่ปลอดภัย: Over time, environmental factors can affect mounting. Periodically check that all clips and screws are securely fastened and the strip is firmly in place.
• ความทนทานต่อสภาพอากาศ: While the strip is IP65 waterproof, extreme weather conditions (e.g., heavy storms, prolonged freezing temperatures) can still impact performance. Ensure proper drainage around the installation area.

การแก้ไขปัญหา

If you encounter issues with your Lepro SW1 LED Strip Lights, refer to the following common solutions.

ข้อมูลจำเพาะ

การรับประกันและการสนับสนุน

Your Lepro SW1 AI Smart Outdoor LED Strip Lights come with a การรับประกันจากผู้ผลิต 2 ปี.

For technical support, warranty claims, or further assistance, please contact Lepro customer service through their official website or the contact information provided in the Lepro app.

คุณยังสามารถเยี่ยมชม ร้าน Lepro บน Amazon สำหรับข้อมูลผลิตภัณฑ์เพิ่มเติมและทรัพยากรสนับสนุน