Generic HS-DY4 3-Tier 3D Printer Stand and Filament Storage Rack User Manual

1. บทนำ

This manual provides instructions for the assembly, operation, and maintenance of your Generic HS-DY4 3-Tier 3D Printer Stand and Filament Storage Rack. This multi-functional organizer is designed to provide a dedicated space for your 3D printer and efficient storage for filament spools, enhancing your workspace organization.

2. ข้อมูลด้านความปลอดภัย

• อ่านคำแนะนำทั้งหมดอย่างละเอียดก่อนประกอบและใช้งาน
• ตรวจสอบให้แน่ใจว่าส่วนประกอบทั้งหมดถูกยึดแน่นสนิทระหว่างการประกอบ เพื่อป้องกันการโยกเยก
• Do not overload the shelves beyond their intended capacity.
• เก็บชิ้นส่วนขนาดเล็กและวัสดุบรรจุภัณฑ์ให้ห่างจากเด็ก
• When moving the stand, ensure the casters are unlocked and move slowly to prevent tipping. Lock casters once in desired position.
• For the integrated power strip, ensure it is connected to a grounded outlet and do not exceed its electrical rating.

3. เนื้อหาบรรจุภัณฑ์

Please verify that all the following components are present before beginning assembly:

• Carbon Steel Frame Components (vertical posts, horizontal bars, shelf supports)
• MDF Boards (3 shelves)
• Casters (4, typically 2 with locking mechanism)
• Integrated Power Strip with USB ports
• Assembly Hardware (screws, bolts, nuts, Allen wrench/screwdriver)
• Filament Spool Holders (rods or dividers)

4. คำแนะนำในการประกอบ

Follow these steps to assemble your 3D Printer Stand and Filament Storage Rack. It is recommended to assemble on a soft, clean surface to prevent scratching components.

1. ติดล้อเลื่อน: Secure the four casters to the bottom of the base frame using the provided hardware. Ensure two locking casters are placed on the front for stability.
2. ประกอบโครงฐาน: Connect the horizontal base bars to the vertical posts, forming the lowest tier of the frame. Do not fully tighten screws until all major components are in place.
3. ติดตั้งชั้นล่าง: Place the first MDF board onto the assembled lower frame. Secure it with the appropriate hardware.
4. Assemble Middle and Upper Tiers: Continue by attaching the next set of vertical posts and horizontal bars to form the middle tier. Install the second MDF board. Repeat for the top tier and the third MDF board.
5. Install Filament Holders: Insert the filament spool holders or dividers into the designated slots on the middle and lower shelves.
6. Mount Power Strip: Attach the integrated power strip to the side or back of the upper frame, as indicated by the design, using the provided mounting hardware.
7. การขันขั้นสุดท้าย: Once all components are in place and aligned, systematically tighten all screws and bolts to ensure the stand is stable and secure.

รูปที่ 4.1: Fully assembled 3-tier 3D printer stand, showcasing the top platform for a printer, two lower shelves for filament storage, and an integrated power strip. The stand is equipped with casters for mobility.

5. คู่มือการใช้งาน

• ตำแหน่งการวางเครื่องพิมพ์: Place your 3D printer on the top shelf. Ensure it is centered and stable.
• การจัดเก็บเส้นใย: Utilize the middle and lower shelves for organizing your 3D printer filament spools. The integrated holders are designed to keep spools neatly arranged and easily accessible.
• Power Strip Usage: Connect your 3D printer and other peripherals (e.g., laptop, tools) to the integrated power strip. This provides convenient power access directly at your workstation.
• ความคล่องตัว: To move the stand, unlock the casters. Once the stand is in the desired location, lock the casters to prevent accidental movement and ensure stability during operation.

6. การบำรุงรักษา

• การทำความสะอาด: Wipe down the carbon steel frame and MDF boards with a soft, damp ผ้า หลีกเลี่ยงน้ำยาทำความสะอาดที่มีฤทธิ์กัดกร่อนหรือสารเคมีรุนแรงที่อาจทำลายพื้นผิวได้
• การตรวจสอบฮาร์ดแวร์: Periodically check all screws and bolts to ensure they remain tight. Re-tighten if necessary to maintain structural integrity.
• การดูแลผู้ฝึกสอน: Keep casters free of dust and debris to ensure smooth movement.

7 การแก้ไขปัญหา

• ขาตั้งโคลงเคลง: Ensure all assembly hardware is fully tightened. Check that the stand is on a level surface.
• ล้อไม่หมุนอย่างราบรื่น: Check for debris caught in the caster wheels. Ensure casters are unlocked when attempting to move the stand.
• Power Strip Not Working: Verify the power strip is plugged into a functional wall outlet. Check for tripped circuit breakers.

8. ข้อมูลจำเพาะ

9. การรับประกันและการสนับสนุน

For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact the seller directly. Keep your purchase receipt as proof of purchase.