VINGLI 24-inch Sand Pool Filter System with 1.5 HP Pump Instruction Manual

การแนะนำ

This manual provides essential information for the safe installation, operation, and maintenance of your VINGLI 24-inch Sand Pool Filter System with a 1.5 HP Pump. Please read all instructions carefully before installation and use to ensure proper function and longevity of your equipment. This system is designed for efficient filtration of above-ground and in-ground swimming pools up to 22,000 gallons.

Image: The VINGLI 24-inch Sand Pool Filter System, illustrating its powerful filtration capability with water flow indicators.

ข้อมูลด้านความปลอดภัย

คำเตือน: Failure to follow these instructions can result in serious injury or death. Always observe basic safety precautions when installing and operating this equipment.

• ตัดการเชื่อมต่อไฟฟ้าก่อนซ่อมบำรุง
• Ensure the system is installed by a qualified professional in accordance with local codes.
• ห้ามใช้งานระบบหากมีส่วนใดส่วนหนึ่งเสียหาย
• ให้เด็กอยู่ห่างจากอุปกรณ์
• ห้ามใช้งานปั๊มให้แห้ง
• Maintain proper water chemistry in your pool.
• Always relieve pressure in the filter tank before opening the multi-port valve or performing maintenance.

รายการส่วนประกอบ

ตรวจสอบว่าส่วนประกอบทั้งหมดมีอยู่ก่อนเริ่มการติดตั้ง:

• ถังกรองทราย (ขนาด 24 นิ้ว)
• 1.5 HP Pool Pump (115V)
• วาล์วหลายพอร์ต
• ตะกร้ากรอง
• เกจวัดแรงดัน
• การเชื่อมต่อท่อและ Clamps
• แผ่นฐาน
• คู่มือการใช้งาน

การตั้งค่า

1 การวาง

Position the filter system on a firm, level surface, preferably concrete, as close to the pool as possible. Ensure adequate ventilation and protection from direct sunlight and harsh weather. Maintain sufficient clearance around the unit for servicing.

2. การประกอบ

1. Attach the pump to the base plate.
2. Place the filter tank onto the base plate.
3. Connect the multi-port valve to the top of the filter tank. Ensure the O-ring is properly seated and secure the clamp.
4. Install the pressure gauge into the designated port on the multi-port valve.

3. การเพิ่มสื่อกรอง

The VINGLI filter system is compatible with both filter sand and filter balls. For optimal performance, use #20 silica sand (0.45-0.55mm) or approved filter balls.

1. Remove the multi-port valve from the tank.
2. ปิดปากท่อระบายน้ำด้านในถังเพื่อป้องกันไม่ให้ทรายเข้าไป
3. Carefully pour the filter media into the tank. Refer to the specifications table for the recommended amount of sand.
4. Remove the standpipe cover and re-attach the multi-port valve.

Image: Illustration demonstrating that both sand and filter balls can be used as filter media in the system.

4. การเชื่อมต่อระบบประปา

Connect the pool plumbing to the multi-port valve and pump:

• Connect the hose from the pool skimmer/main drain to the pump's inlet (suction side).
• Connect the pump's outlet (discharge side) to the "PUMP" port on the multi-port valve.
• Connect the "RETURN" port on the multi-port valve to the pool's return line.
• Connect the "WASTE" port on the multi-port valve to a suitable waste line or backwash hose.

Image: The VINGLI filter system installed next to an above-ground pool, showing hose connections.

Image: The VINGLI filter system installed next to an in-ground pool, showing hose connections.

คำแนะนำการใช้งาน

The multi-port valve controls the flow of water through the filter system. Always turn off the pump before changing the valve position to prevent damage.

Image: The multi-port valve highlighting its six operational functions.

• กรอง: Normal filtering mode. Water flows through the sand bed, trapping debris, and returns to the pool.
• แบ็ควอช: Cleans the filter by reversing water flow, flushing trapped debris out the waste port.
• ล้าง: Used after backwashing to flush residual dirt from the valve and sand bed to the waste port, preventing it from returning to the pool.
• ของเสีย: Bypasses the filter, sending water directly from the pool to the waste port. Useful for vacuuming heavy debris or lowering pool water level.
• หมุนเวียน: Bypasses the filter, circulating water directly back to the pool. Useful for mixing chemicals without filtering.
• ปิด: Shuts off all flow to the filter and pump. Do not operate the pump in this position.

Initial Startup and Backwash

1. Ensure all connections are secure and the pool is filled to the proper level.
2. Prime the pump by filling the pump basket with water if it's not self-priming.
3. Set the multi-port valve to the "BACKWASH" position.
4. Turn on the pump. Backwash for 2-3 minutes or until the water in the sight glass (if present) runs clear.
5. ปิดปั๊ม
6. Set the multi-port valve to the "RINSE" position.
7. เปิดปั๊มน้ำ ล้างประมาณ 30-60 วินาที
8. ปิดปั๊ม
9. Set the multi-port valve to the "FILTER" position.
10. Turn on the pump. The system is now operating in normal filtration mode.

การซ่อมบำรุง

Regular Backwashing

Backwash the filter when the pressure gauge reads 8-10 PSI above its clean operating pressure, or when water flow to the pool noticeably decreases. Follow the "Initial Startup and Backwash" procedure.

Filter Media Replacement

Filter sand typically needs replacement every 3-5 years, depending on usage and water chemistry. Filter balls may last longer but should be inspected annually.

ฤดูหนาว

Before freezing temperatures arrive, drain all water from the pump and filter tank. Disconnect hoses and store the pump and multi-port valve in a dry, protected area. The filter tank can remain outdoors if completely drained.

การแก้ไขปัญหา

ข้อมูลจำเพาะ

Image: Detailed specifications table for various VINGLI sand filter sizes, including recommended pool size, flow rate, pump horsepower, and sand requirements.

การรับประกันและการสนับสนุน

For warranty information, technical support, or to purchase replacement parts, please contact VINGLI customer service. Refer to your purchase documentation for specific warranty terms and contact details.

You can also visit the official VINGLI store for more information: ร้าน VINGLI บน Amazon