Portwest Hi-Vis FR Treated Vest ANSI 2

Portwest Hi-Vis FR Treated Safety Vest

Model: Hi-Vis FR Treated Vest ANSI 2

คู่มือการใช้งาน

1. บทนำและผลิตภัณฑ์view

This manual provides essential information for the proper use, care, and maintenance of your Portwest Hi-Vis FR Treated Safety Vest. This vest is designed to offer high visibility and flame resistance, crucial for safety in hazardous work environments. Adherence to these instructions will ensure the vest performs as intended, providing optimal protection and durability.

ด้านหน้า view of the Portwest Hi-Vis FR Treated Safety Vest in orange with reflective tape.

รูปที่ 1 : ด้านหน้า view of the Portwest Hi-Vis FR Treated Safety Vest.

กลับ view of the Portwest Hi-Vis FR Treated Safety Vest in orange with reflective tape.

รูปที่ 2: ย้อนกลับ view of the Portwest Hi-Vis FR Treated Safety Vest.

2. คำแนะนำในการติดตั้งและการสวมใส่

The Portwest Hi-Vis FR Treated Safety Vest is designed for easy donning and removal. Follow these steps for proper wear:

  1. เลือกขนาดที่ถูกต้อง: Ensure you have chosen a vest that fits comfortably over your regular clothing without being too loose or too tight. Refer to the sizing chart in Section 6 for guidance.
  2. Donning the Vest: Open the hook and loop closure at the front of the vest. Slip your arms through the armholes and position the vest over your torso.
  3. Securing the Vest: Fasten the hook and loop closure securely at the front. Ensure the vest is not twisted and lies flat against your body.
  4. Visibility Check: Confirm that the reflective tape and high-visibility fabric are unobstructed and clearly visible from all angles.

3. แนวทางการปฏิบัติงานและความปลอดภัย

This safety vest is a critical component of personal protective equipment (PPE). Proper use is essential for maximizing its protective qualities.

  • การมองเห็นสูง: Always wear the vest in environments where high visibility is required, especially in low light conditions or near moving vehicles and machinery. The vest's design, featuring premium sew-on flame-resistant reflective tape, enhances your presence.
  • ความต้านทานเปลวไฟ: The vest is FR (Flame Resistant) treated. It is designed to protect against brief thermal exposure. However, it is not a primary fire-fighting garment and should be used in conjunction with other appropriate FR PPE as dictated by risk assessments.
  • การตรวจสอบ: Before each use, inspect the vest for any damage, tears, or degradation of the reflective material. A damaged vest may compromise safety.
  • การแบ่งชั้น: Wear the vest as the outermost layer of clothing to ensure maximum visibility. Do not cover it with other garments or equipment that would obscure the reflective or high-visibility material.
Worker wearing a high-visibility vest with reflective cross-back design, illustrating high visibility.

Figure 3: Proper wear of a high-visibility vest for maximum safety.

Worker wearing flame-resistant clothing while working on a utility pole, demonstrating flame resistance.

รูปที่ 4: อดีตample of flame-resistant workwear in use.

4. คำแนะนำในการบำรุงรักษาและการดูแลรักษา

To maintain the effectiveness and longevity of your Portwest Hi-Vis FR Treated Safety Vest, follow these care instructions carefully:

  • การซักล้าง: Maximum washing temperature 40°C (104°F) with a mild process.
  • การฟอกสี: ห้ามใช้สารฟอกขาว
  • การอบแห้ง: Do not tumble dry. Drip line drying is recommended.
  • การรีดผ้า: Iron at a maximum sole-plate temperature of 110°C (230°F) without steam.
  • ซักแห้ง: ห้ามซักแห้ง
  • Wash Limit: Maximum number of washes: 5 times. Exceeding this limit may compromise the flame-resistant properties and reflective performance.

5 การแก้ไขปัญหา

หากคุณพบปัญหาใดๆ กับเสื้อกั๊กนิรภัย โปรดพิจารณาสิ่งต่อไปนี้:

  • ทัศนวิสัยลดลง: If the high-visibility fabric or reflective tape appears dull or less effective, it may be due to dirt, excessive washing, or wear. Ensure the vest is clean and inspect for damage. If visibility is significantly compromised, the vest should be replaced.
  • ความเสียหาย: Any tears, holes, or significant fraying can reduce the protective qualities of the vest. Damaged vests should be immediately removed from service and replaced.
  • ไม่เหมาะสม: A vest that is too large can snag on equipment, and one that is too small can restrict movement or tear. Refer to the sizing guide to ensure the correct fit.

6. ข้อมูลจำเพาะ

  • ออกแบบ: Comfortable vest with premium sew-on flame-resistant reflective tape and hook and loop closure for easy access. Provides a generous fit.
  • วัสดุ: Shell Fabric: Bizflame Work 120g. 100% Polyester.
  • Available Colors & Sizes: Orange (Small-Medium to XX-Large) and Yellow (Small-Medium to 4X-Large/5X-Large).
  • มาตรฐาน:
    • EN ISO 14116 Index 1
    • EN ISO 20471 Class 2
    • RIS 3279 TOM Issue 2 (Orange Only)
  • แผนก: ผู้ชาย
  • ต้นทาง: สินค้านำเข้า

Sizing Information (US Rain Jacket Equivalent)

ขนาดแบรนด์USA (in)หน้าอก (นิ้ว)
เล็ก0 - 036 - 38
ปานกลาง0 - 040 - 41
ใหญ่0 - 042 - 44
ขนาดใหญ่พิเศษ0 - 046 - 48
2X-ใหญ่0 - 050 - 52

7. ข้อมูลการรับประกัน

Specific warranty details for the Portwest Hi-Vis FR Treated Safety Vest are not provided in the product listing. For information regarding product warranty, please contact Portwest directly through their official webเว็บไซต์หรือช่องทางการบริการลูกค้า

8. ข้อมูลสนับสนุนและการติดต่อ

For further assistance, product inquiries, or support, please visit the official Portwest store or webเว็บไซต์:

© 2026 Portwest. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.