คู่มือการใช้งานเครื่องส่งและรับสัญญาณ HDMI ไร้สาย Vrriis WL082

การแนะนำ

The Vrriis WL082 Wireless HDMI Transmitter and Receiver system provides a high-definition wireless video transmission solution. This system is designed to extend 1080P Full HD HDMI signals over long distances with minimal latency, making it suitable for various applications including streaming from DSLRs, laptops, and set-top boxes to TVs or projectors. It supports dual-band 2.4/5G high-speed transmission and features convenient options like HDMI loop out and IR remote control support.

Image: The Vrriis WL082 Wireless HDMI Transmitter (TX) and Receiver (RX) units.

มีอะไรอยู่ในกล่อง

โปรดตรวจสอบว่ารายการทั้งหมดที่ระบุไว้ด้านล่างมีอยู่ในแพ็คเกจของคุณหรือไม่:

• ตัวส่งสัญญาณ (TX) x 1
• ตัวรับสัญญาณ (RX) x 1
• สาย USB C x 2
• อะแดปเตอร์ x 2
• คู่มือการใช้งาน x 1

Image: A visual representation of all components included in the Vrriis WL082 Wireless HDMI Extender Kit.

การตั้งค่า

1 การเปิดเครื่องและการเชื่อมต่อครั้งแรก

1. Connect the provided USB-C cables to the 5V/2A power ports on both the Transmitter (TX) and Receiver (RX) units. Plug the adapters into a power source. The indicator light on both units will turn on, indicating they are powered.
2. เตรียมสาย HDMI
3. Connect one end of the HDMI cable to the HDMI IN port of the Transmitter (TX).
4. Connect the other end of the HDMI cable to the HDMI OUT1 port of the Receiver (RX).
5. After connecting, wait a few seconds. The indicator light on both units will flash to confirm successful pairing.
6. Unplug the power cables from both the transmitter and receiver.
7. Unplug the HDMI cable connecting the transmitter and receiver. The units are now paired and can be used normally.

2. การติดตั้งเสาอากาศ

Each unit (Transmitter and Receiver) is equipped with two antenna ports. Screw the provided antennas onto these ports to ensure optimal signal transmission and reception.

Image: The Transmitter and Receiver units with their antennas properly installed for operation.

3. ตัวเลือกพลังงาน

The WL082 system offers flexible power options:

• USB C + Adapters: Use the included 5V/2A USB-C cables and adapters for standard wall power.
• พาวเวอร์แบงค์: For portable use, the units can be powered by a 5V/2A portable rechargeable power bank (not included).
• แบตเตอรี่ซีรีส์ NP-F: The units support NP-F Series batteries (F970, F750, F550) for extended wireless operation (batteries not included).

Image: Visual guide to the various power supply methods for the Vrriis WL082, including USB-C, power bank, and NP-F batteries.

คำแนะนำการใช้งาน

1. Basic Connection and Transmission

After successful pairing, connect your HDMI source device (e.g., DSLR, laptop, set-top box) to the HDMI IN port of the Transmitter (TX). Connect your display device (e.g., TV, projector, monitor) to the HDMI OUT port(s) of the Receiver (RX). The system will automatically establish a wireless connection, transmitting 1080P Full HD video with low latency.

2. HDMI Loop Out and Dual HDMI Output

The Transmitter (TX) unit features an HDMI Loop Out port, allowing you to connect a local monitor to view the source content simultaneously with the wireless transmission. The Receiver (RX) unit provides dual HDMI outputs (HDMI OUT1 and HDMI OUT2), enabling connection to two separate display screens at the same time for convenient monitoring or multi-display setups.

Image: The HDMI Loop Out on the transmitter and dual HDMI outputs on the receiver for flexible display options.

3. IR Remote Control Support

The system supports IR pass-back functionality, allowing you to control your HDMI source device remotely. Connect the included IR cable to the IR port on the Transmitter (TX) and position the IR head near the infrared area of your source device. Use your source device's remote control from the receiver location to send commands.

Image: Setup for IR pass-back, enabling remote control of the source device from the receiver's location.

4. Multi-Receiver Setup (1 Transmitter to 5 Receivers)

The Vrriis WL082 system can support up to 5 receivers with a single transmitter. This allows for multiple displays to receive the same video signal simultaneously. Note that as the number of receivers increases, the wireless transmission distance may decrease. Each additional receiver must be paired with the original transmitter before use.

Image: A visual representation of one transmitter (TX) broadcasting to multiple receivers (RXs) in a stadium setting.

การซ่อมบำรุง

To ensure the longevity and optimal performance of your Vrriis WL082 Wireless HDMI system, follow these maintenance guidelines:

• การทำความสะอาด: Use a soft, dry cloth to clean the exterior of the units. Avoid using liquid cleaners or aerosols, as they may damage the device.
• พื้นที่จัดเก็บ: When not in use, store the units in a cool, dry place, away from direct sunlight and extreme temperatures. The included carry case is ideal for protection during storage and transport.
• การดูแลสายเคเบิล: Handle HDMI and power cables carefully. Avoid bending them sharply or placing heavy objects on them, which can cause internal damage.
• เสาอากาศ: Ensure antennas are securely attached during operation and removed or protected during transport to prevent damage.

การแก้ไขปัญหา

If you encounter issues with your Vrriis WL082 system, please refer to the following common troubleshooting steps:

• ไม่มีสัญญาณ/สัญญาณไม่ดี:
  • Ensure both Transmitter (TX) and Receiver (RX) units are powered on and their indicator lights are active.
  • ตรวจสอบให้แน่ใจว่าสาย HDMI ทุกเส้นเชื่อมต่อกับพอร์ตที่ถูกต้องอย่างแน่นหนา (HDMI IN บนตัวส่งสัญญาณ, HDMI OUT บนตัวรับสัญญาณ)
  • Check for obstructions between the TX and RX units. Walls, metal, bricks, or glass can significantly reduce signal strength and range. Try repositioning the units for a clearer line of sight.
  • ยืนยันว่าอุปกรณ์แสดงผลถูกตั้งค่าเป็นแหล่งอินพุต HDMI ที่ถูกต้อง
• ปัญหาการจับคู่:
  • Follow the initial pairing steps precisely as described in the Setup section.
  • Ensure both units are powered on during the pairing process.
  • If pairing fails, try resetting both units using the reset button (requires a paperclip) and repeat the pairing process.
• No IR Remote Control:
  • Ensure the IR cable is correctly plugged into the IR port on the Transmitter (TX).
  • Position the IR emitter head directly in front of the IR sensor of your source device.
  • Check that your source device's remote control batteries are functional.
• ปัญหาการซิงค์เสียง/วิดีโอ:
  • While the system is designed for low latency (0.05s), ensure there are no excessive wireless interferences.
  • Try reducing the distance between the transmitter and receiver.

ข้อมูลจำเพาะ

การรับประกันและการสนับสนุน

For any questions or concerns regarding your Vrriis WL082 Wireless HDMI Transmitter and Receiver, please contact customer support. Vrriis offers professional customer support to assist with product inquiries and technical assistance.

Protection plans are available for purchase to extend coverage beyond the standard warranty. These plans offer additional peace of mind for your investment.

• แผนคุ้มครอง 2 ปี
• แผนคุ้มครอง 3 ปี
• การปกป้องแบบสมบูรณ์: แผนเดียวครอบคลุมการซื้อที่เข้าเงื่อนไขทั้งหมดในอดีตและอนาคต

For direct support, please refer to the contact information provided in your product packaging or visit the official Vrriis store on Amazon.