DieseRC DC 8V-80V Wireless Waterproof Remote Control Switch 30A Relay User Manual

สินค้าเกินview

The DieseRC DC 8V-80V Wireless Waterproof Remote Control Switch is designed for reliable control of various electrical devices in both indoor and outdoor environments. Featuring an IP65 waterproof rating and a robust 30A relay, it ensures stable operation for high-power applications. The system includes a receiver and two transmitters, offering flexible control with a strong 433 MHz RF signal.

• กันน้ำ IP65: Suitable for indoor and outdoor use, resistant to rain and sand. Avoid continuous submersion.
• High Power Load: Equipped with a 30A relay for stable control of high-power electrical devices. Each receiver can store up to 20 transmitters.
• สัญญาณแรง: 433 MHz RF wireless remote control with stable and reliable performance. Range up to 50 meters in open spaces. Features an extendable antenna for improved signal reception.
• ง่ายต่อการใช้: Simple setup and reset procedures. Supports three operating modes: momentary, toggle, and latched. The default mode is latched (ON/OFF buttons).
• การประยุกต์ใช้ที่กว้าง: Ideal for controlling pumps, motors, lamps, fans, wireless security alarms, access control systems, dust collectors, car wash machines, machine tools, and various agricultural and industrial electrical equipment.

คำแนะนำการตั้งค่า

1. การต่อสายเครื่องรับสัญญาณ

Install the receiver between the device to be controlled and the power supply. Ensure correct polarity for DC connections. The input voltagช่วงการทำงานคือ DC 8V-80V

Image: Wiring diagram for the DieseRC DC 8V-80V wireless switch. It illustrates connecting the receiver to a DC 8V-80V power source (V- and V+) and an LED light strip (V+ and V-) using hot melt wiring conduits for secure connections. The remote control is shown with a 50-meter open space range.

2. Detailed Wiring Steps

1. Step 1: Strip the wire at the link. Carefully remove insulation from the wire ends.
2. Step 2: Insert the wire into the solder ring and move to the center position. Ensure the wire does not exceed the hot melt glue area.
3. Step 3: Use a heat gun to heat and shrink. Apply heat evenly to shrink the connector, creating a waterproof seal.
4. Step 4: After heating, let it cool for one minute. Allow the connection to cool and solidify before use.

Image: Step-by-step guide for wiring connections. It shows stripping wires, inserting them into heat shrink solder connectors, heating the connectors with a heat gun, and the final sealed connection.

3. Pairing the Remote Control (Latched Mode Default)

The product is pre-set to latched mode. To pair the remote control:

1. กดปุ่มการเรียนรู้บนตัวรับ 3 ครั้ง
2. Press the "ON" button on the remote control.
3. Press the "OFF" button on the remote control. Pairing is successful.

Image: Diagram illustrating how to pair the 433MHz remote control in Latched Mode. It shows pressing the learning button 3 times, then pressing the 'ON' button, and finally the 'OFF' button on the remote.

โหมดการทำงาน

The receiver supports three operating modes: Momentary, Toggle, and Latched. The default setting is Latched Mode.

• Latched Mode (Default): Press 'ON' to turn on, press 'OFF' to turn off.
• โหมดสลับ: Press the remote button once to turn on, press the same button again to turn off.
• โหมดชั่วขณะ: Press and hold the remote button to turn on, release the button to turn off.

การเปลี่ยนโหมดการทำงาน

Specific instructions for changing modes are typically provided with the product. Generally, this involves pressing the learning button a certain number of times to cycle through modes or to enter a specific mode programming sequence. Refer to the detailed instructions included with your product for exact steps.

การรีเซ็ตเครื่องรับ

To clear all paired remote controls and reset the receiver:

1. Press the learning button on the receiver 8 times. All paired remotes will be cleared.

Image: Diagram showing how to reset the receiver by pressing the learning button 8 times. This action clears all previously paired remote controls.

การซ่อมบำรุง

To ensure optimal performance and longevity of your DieseRC Wireless Waterproof Remote Control Switch, follow these maintenance guidelines:

• การทำความสะอาดปกติ: Periodically wipe the exterior of the receiver with a soft, damp ผ้าเช็ดทำความสะอาดฝุ่นและสิ่งสกปรก ห้ามใช้สารเคมีรุนแรงหรือน้ำยาทำความสะอาดที่มีฤทธิ์กัดกร่อน
• ตรวจสอบการเชื่อมต่อ: Annually check all wiring connections to ensure they are secure and free from corrosion. Re-tighten if necessary.
• ตำแหน่งเสาอากาศ: Ensure the receiver's antenna is extended and positioned for optimal signal reception, especially if experiencing reduced range.
• การเปลี่ยนแบตเตอรี่ (รีโมท): If the remote control's range decreases or it becomes unresponsive, replace the battery. Refer to the remote's specific battery type.
• การปกป้องสิ่งแวดล้อม: While the device is IP65 waterproof, avoid prolonged exposure to extreme weather conditions or continuous submersion in water to prevent potential damage.

การแก้ไขปัญหา

ข้อมูลจำเพาะทางเทคนิค

Image: Detailed dimensions of the DieseRC outdoor switch receiver, showing a length of 102mm (4.01in), width of 47mm (1.85in), and depth of 29mm (1.14in).

ข้อมูลการรับประกัน

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and duration, please refer to the documentation included with your purchase or contact DieseRC customer support. Keep your proof of purchase for warranty claims.

การสนับสนุนลูกค้า

If you encounter any issues or have questions regarding the installation, operation, or maintenance of your DieseRC Wireless Waterproof Remote Control Switch, please contact DieseRC customer support. You can typically find contact information on the product packaging, the official DieseRC webไซต์หรือผ่านผู้ค้าปลีกของคุณ

When contacting support, please have your product model (2401H2) and purchase details ready to assist with a quicker resolution.