KUNGKIC Aluminum Alloy Steering Wheel Paddle Shift Extensions Instruction Manual

1. สินค้าหมดview

The KUNGKIC Aluminum Alloy Steering Wheel Paddle Shift Extensions are designed to enhance the driving experience by providing extended and easily accessible paddle shifters. Made from durable aluminum alloy, these extensions offer a comfortable grip and a precise feel for gear changes. They are specifically designed for select Mini models to ensure a perfect fit and seamless integration with your vehicle's interior.

มีอะไรอยู่ในกล่อง

• 2 x Aluminum Alloy Steering Wheel Paddle Shift Extensions (Left and Right)

2. คู่มือการติดตั้ง

Installation of the KUNGKIC paddle shift extensions is a straightforward process that typically takes approximately 2 minutes. No specialized tools are required.

1. ทำความสะอาดพื้นผิว: Ensure the surface of your existing paddle shifters is clean and free from dust, grease, or wax. Use an alcohol wipe for best results and allow it to dry completely.
2. Prepare the Adhesive: The extensions come with pre-attached adhesive tape on the back. Carefully peel off the protective backing from the tape on both paddle shift extensions.
3. จัดแนวและยึดติด: Align each extension with its corresponding original paddle shifter (left for '-' and right for '+'). Press firmly to ensure proper adhesion. Hold for a few seconds to secure.
4. ตรวจสอบความเหมาะสม: After installation, gently test the extensions to ensure they are securely attached and do not interfere with the steering wheel's operation or other controls.

3. คู่มือการใช้งาน

These paddle shift extensions are designed to provide a more ergonomic and accessible way to operate your vehicle's existing paddle shifters. They do not alter the functionality of your vehicle's transmission system.

• Upshift: Pull the right paddle shifter extension (marked with '+') towards you to shift up a gear.
• Downshift: Pull the left paddle shifter extension (marked with '-') towards you to shift down a gear.

Refer to your vehicle's owner's manual for specific instructions on how to use your car's paddle shift system and for information on driving modes that enable manual gear selection.

4. การบำรุงรักษา

To maintain the appearance and longevity of your KUNGKIC Aluminum Alloy Steering Wheel Paddle Shift Extensions, follow these simple maintenance guidelines:

• การทำความสะอาด: Wipe the extensions with a soft, damp cloth. For stubborn dirt, a mild automotive interior cleaner can be used. Avoid abrasive cleaners or solvents that may damage the finish.
• การตรวจสอบ: Periodically check the adhesion of the extensions to ensure they remain securely attached. If any loosening is observed, re-apply pressure or consider replacing the adhesive tape.
• หลีกเลี่ยงสารเคมีที่รุนแรง: Do not expose the extensions to harsh chemicals or extreme temperatures, as this may affect the material and finish.

5 การแก้ไขปัญหา

If you encounter any issues with your paddle shift extensions, consider the following:

• Extensions not adhering properly: Ensure the original paddle shifter surface was thoroughly cleaned and dry before installation. Re-apply pressure for an extended period. If necessary, remove the old adhesive and apply new, strong automotive-grade double-sided tape.
• Interference with other controls: Double-check that the extensions are correctly aligned and not obstructing any buttons or levers on the steering wheel. Re-adjust if needed.
• ทรงหลวม: If the extensions feel loose, ensure they are fully seated against the original paddles. The adhesive should provide a firm hold.

For further assistance, please contact KUNGKIC customer support.

6. ข้อมูลจำเพาะผลิตภัณฑ์

7. การรับประกันและการสนับสนุน

KUNGKIC is committed to providing high-quality products and customer satisfaction. If you have any questions regarding the use, installation, or after-sales support for your paddle shift extensions, please do not hesitate to contact KUNGKIC customer service.

For warranty information, please refer to the terms and conditions provided at the time of purchase or contact KUNGKIC directly.