MAXSafes 10005V-new Under Desk Handgun Safe User Manual

1. สินค้าหมดview

The MAXSafes 10005V-new Under Desk Handgun Safe provides secure storage with quick access features. It incorporates advanced biometric finger vein recognition, a digital keypad, and a backup mechanical key for reliable security. Designed for discreet placement under desks or in vehicles, it offers ample space for two handguns and accessories.

Image 1: MAXSafes 10005V-new Under Desk Handgun Safe.

คุณสมบัติหลัก:

• Biometric Finger Vein Recognition: Advanced security reading blood vessel texture.
• แป้นพิมพ์ดิจิตอล: Quick access with a programmable passcode.
• Backup Mechanical Key: Ensures access in case of power failure or forgotten codes.
• Auto Slide-out Design: Provides rapid access to contents.
• 16 Gauge Carbon Steel Construction: Enhanced theft prevention.
• Customizable Foam Interior: Protects firearms and valuables.
• โหมดเงียบ: For discreet operation.
• โหมดปลุก: Activates after multiple incorrect access attempts.

2. การตั้งค่าและการติดตั้ง

2.1 Unboxing the Safe

Carefully remove the safe and all components from the packaging. Ensure all parts listed in the packing list are present.

2.2 การติดตั้งแบตเตอรี่

Before initial use, install 4 AA batteries into the battery compartment. We recommend using new, high-quality batteries for optimal performance. Under regular circumstances, four AA batteries should power the safe for 6-8 months.

1. Locate the battery compartment cover on the side of the safe.
2. Slide the battery cover to the left to open it.
3. ใส่แบตเตอรี่ AA จำนวน 4 ก้อน โดยให้แน่ใจว่าขั้วถูกต้อง (+/-)
4. เลื่อนฝาครอบกลับเข้าที่จนกระทั่งคลิกอย่างแน่นหนา

2.3 การติดตั้งตู้เซฟ

The MAXSafes 10005V-new can be installed underneath a desk surface or placed on top of a desk. Follow the instructions below for your preferred installation method.

2.3.1 Under-Desk Installation

1. Open the safe using the mechanical key.
2. Pull out the drawer by pressing the switches on both sides of the rail.
3. Place the provided installation guide paper on the desired position underneath the desk. Ensure Side A faces the opening side of the safe.
4. Mark the six drilling holes and drill.
5. Align the six holes on the bracket with the drilled holes and install the bracket on the desk with the provided ST 4.8*12 bolts.
6. Slowly slide the body of the safe into the bracket with the opening side facing out.
7. Make sure the pre-drilled holes on the safe align with the pre-drilled holes on the bracket and slowly release the safe.
8. Push the body of the safe further into the bottom of the bracket (approximately 5mm).
9. Align both sides of the drawer with the sliding rail and install it to the body of the safe.

Image 2: MAXSafes Under Desk Drawer Gun Safe installed under a desk.

2.3.2 On-Desk Installation

1. Open the safe using the mechanical key.
2. Pull out the drawer by pressing the switches on both sides of the rail.
3. Remove the bracket from the housing by pushing the bracket backward.
4. Install the four landing pads included in the package to the four corners on the bottom of the safe to prevent potential damage to your desk surface.
5. Place the installation guide paper on the desired position on the desk. Ensure Side A faces the opening side of the safe.
6. Mark the three drilling holes and drill.
7. Install one ST 4.8*18 screw on the center hole position, leaving out 8-9mm from the installation surface.
8. Slowly release the safe until the landing pads make contact with the desk surface.
9. Push the safe forward until the screw fits into the pre-drilled hole.
10. Adjust the installation position and install screws on the other two pre-drilled holes.
11. Align the safe drawer with the rails and install it to the body of the safe.

Image 3: MAXSafes Under Desk Drawer Gun Safe placed on a nightstand.

3. คู่มือการใช้งาน

3.1 Registering Your Passcode

To register or change your passcode:

1. Open the safe using the mechanical key.
2. Locate the registration button inside the safe.
3. Input your desired passcode twice, pressing the registration button after each input to confirm.
4. A long beep indicates successful registration/change.

3.2 Registering Your Vein IDs

The safe uses advanced finger vein recognition for secure access. Follow these steps to register your Vein IDs:

1. Open the safe with the mechanical key and locate the registration button.
2. Press the registration button and scan your finger 3 times.
3. Each scan will be followed by a yellow light flashing and a single beep.
4. After the third scan, you will hear a long beep, indicating your Vein ID has been successfully recorded.

Important Tips for Vein ID Registration:

• Ensure placing your finger deeply inside the module and keep touching the blue area during registration.
• Must always make sure you keep your finger in the same position while registering.
• We recommend registering the same finger multiple times at slightly different angles to maximize reading accuracy.
• When scanning your Vein ID, please อย่าทำ bend or twist your finger.

Image 4: Illustration of the Vein Recognition Biometric Scanner.

3.3 โหมดเงียบ

Silent Mode allows for discreet operation without audio feedback during passcode input or Vein ID scanning.

1. To activate/deactivate Silent Mode, hold down the button "1" on the keypad.
2. When Silent Mode is activated, passcode input and Vein ID scanning will not produce audio feedback.

3.4 โหมดปลุก

The Alarm Mode provides an additional layer of security by activating an alarm after multiple incorrect access attempts.

1. Alarm Mode will be activated after 5 incorrect inputs (passcode or Vein ID scans).
2. To deactivate Alarm Mode, open the safe with the mechanical key.

4. การบำรุงรักษา

To ensure the longevity and optimal performance of your MAXSafes 10005V-new safe, regular maintenance is recommended:

• การทำความสะอาด: เช็ดภายนอกด้วยผ้านุ่มๆamp ผ้า หลีกเลี่ยงน้ำยาทำความสะอาดที่มีฤทธิ์กัดกร่อนหรือตัวทำละลายที่อาจทำลายพื้นผิวได้
• การเปลี่ยนแบตเตอรี่: Replace batteries every 6-8 months or when the low battery indicator appears. Always use high-quality AA batteries.
• Biometric Sensor Care: Keep the finger vein sensor clean and free of dust or debris. Use a soft, dry cloth to gently wipe the sensor surface.
• กุญแจเครื่องกล: Store backup mechanical keys in a secure location away from the safe. Do not store them inside the safe.

5 การแก้ไขปัญหา

If you encounter issues with your MAXSafes 10005V-new safe, please refer to the following common troubleshooting steps:

• Safe Not Opening:
  • ตรวจสอบให้แน่ใจว่าติดตั้งแบตเตอรี่อย่างถูกต้องและมีประจุเพียงพอ เปลี่ยนแบตเตอรี่หากจำเป็น
  • Verify the passcode is entered correctly.
  • For Vein ID, ensure your finger is placed deeply and correctly on the sensor. Try re-registering your Vein ID.
  • Use the mechanical backup key to open the safe.
• Alarm Mode Activation:
  • The alarm activates after 5 incorrect access attempts.
  • To deactivate, open the safe using the mechanical key.
• Silent Mode Not Working:
  • Ensure Silent Mode is properly activated by holding down button "1" on the keypad.

For further assistance, please contact MAXSafes customer support.

6. ข้อมูลจำเพาะ

7. การรับประกันและการสนับสนุน

For information regarding product warranty, please refer to the documentation included with your purchase or contact MAXSafes customer service directly. The product is sold by MAXSafes and fulfilled by Amazon, offering a 30-day refund/replacement return policy.

ผู้ผลิต: แม็กซ์เซฟ

For technical support or inquiries, please visit the official MAXSafes webเว็บไซต์หรือติดต่อฝ่ายบริการลูกค้าของพวกเขา