LOLARAN GT1000 Rechargeable Metal Detector Kit User Manual

1. บทนำ

Thank you for choosing the LOLARAN GT1000 Metal Detector Kit. This manual provides essential information for the safe and effective operation, assembly, and maintenance of your new metal detector. Designed for both beginners and experienced users, the GT1000 offers advanced detection capabilities in a compact, adjustable, and user-friendly package. Please read this manual thoroughly before use to ensure optimal performance and to prevent damage to the device.

2. เนื้อหาบรรจุภัณฑ์

Your LOLARAN GT1000 Metal Detector Kit includes the following items:

• LOLARAN GT1000 Metal Detector (main unit with control box and search coil)
• Foldable Shovel
• กระเป๋าเป้สะพายหลัง
• หูฟัง
• สายชาร์จ (USB Type-C)
• Pinpointer
• คู่มือการใช้งาน (เอกสารนี้)

3. การติดตั้งและการประกอบ

The LOLARAN GT1000 features a foldable and telescopic design for easy assembly and transport. Follow these steps to set up your metal detector:

1. Unfold the Detector: Gently unfold the main unit until the shaft is extended. Ensure all locking mechanisms click into place securely.
2. ติดที่จับ: Connect the handle to the main shaft using the provided screws. Tighten them firmly to prevent wobbling during use.
3. ปรับความยาว: Press the yellow button on the shaft to extend or retract the telescopic rod. Adjust the length to a comfortable height, typically with the search coil parallel to the ground when standing upright. The adjustable range is 26 to 49 inches.
4. Secure the Search Coil: Ensure the search coil is securely attached and its angle can be adjusted for optimal ground coverage.
5. เชื่อมต่อหูฟัง: Plug the headphones into the designated port on the control box for private audio alerts.
6. ชาร์จแบตเตอรี่: Before first use, fully charge the built-in lithium battery using the provided USB Type-C charging cable. The battery indicator on the LCD screen will show charging status.

4. คู่มือการใช้งาน

Before operating, ensure the metal detector is fully charged and you are in an open outdoor area, away from buildings, pipes, and power lines to avoid electromagnetic interference.

4.1 เปิด/ปิดเครื่อง

To power on the device, press and hold the power button located on the control box. The LCD screen will illuminate. To power off, press and hold the power button again.

4.2 การปรับความไว

Sensitivity controls the detector's ability to find smaller or deeper metals. Higher sensitivity increases detection depth but may also increase noise in mineralized soil. Lower sensitivity reduces noise but may miss smaller targets. Adjust sensitivity using the '+' and '-' buttons in the SENS menu. The GT1000 offers 8 sensitivity levels.

4.3 Discrimination (NOTCH)

The Discrimination (DISC) or NOTCH feature allows you to ignore unwanted metal types (e.g., iron) and focus on valuable targets. Use the MENU button to navigate to DISC or NOTCH mode, then use '+' and '-' to select the metal categories to exclude. The adjustable range is 00-80. The larger the value set, the more metal categories are removed. To restore a metal category, reduce the value until it's back to 00.

4.4 โหมดระบุตำแหน่ง

Once a target is detected, press the PP (Pinpoint) button to narrow down the exact location of the buried object. This mode helps in precise recovery, minimizing digging.

4.5 การปรับระดับเสียง

Adjust the volume of the audio alerts using the volume controls on the device. There are four volume levels, with level 4 being the loudest. Use headphones for clearer audio in noisy environments.

4.6 Detection Tips

• Sweep the search coil from side-to-side, keeping it parallel to the ground and just a few inches above the surface.
• The GT1000 is a motion detector; you must sweep the search coil to detect metal. A motionless search coil over a metal object will not result in detection.
• For accurate detection, use outdoors. Indoor reinforced concrete can interfere with signals.
• The 10-inch search coil is waterproof, allowing for detection in shallow water. However, the LCD control box is not waterproof and must be kept dry.

5. การบำรุงรักษา

• การทำความสะอาด: หลังการใช้งานทุกครั้ง ให้เช็ดทำความสะอาดเครื่องตรวจจับด้วยน้ำยาฆ่าเชื้อamp cloth. Ensure the search coil is clean of dirt and debris. Do not use abrasive cleaners or solvents.
• พื้นที่จัดเก็บ: Store the metal detector in a cool, dry place when not in use. Avoid extreme temperatures and direct sunlight. The foldable design allows for compact storage in the provided backpack.
• การดูแลแบตเตอรี่ Recharge the lithium battery regularly, even if not in frequent use, to maintain battery health. Avoid completely draining the battery before recharging.
• การตรวจสอบ: Periodically check all connections and screws to ensure they are tight and secure.

6 การแก้ไขปัญหา

If you encounter issues with your LOLARAN GT1000 Metal Detector, please refer to the following common problems and solutions:

• False Signals/Chattering:
  • สาเหตุ: High sensitivity in mineralized soil or electromagnetic interference from nearby electronics (power lines, cell phones).
  • สารละลาย: Reduce the sensitivity setting. Move to a different area away from interference sources.
• ไม่ตรวจจับ:
  • สาเหตุ: Incorrect mode selected (e.g., DISC mode excluding target metal), low battery, or motionless search coil.
  • สารละลาย: Ensure the desired metal type is not discriminated against. Check battery level. Remember to sweep the search coil from side-to-side.
• สัญญาณอ่อน:
  • สาเหตุ: Target is too deep, too small, or sensitivity is too low.
  • สารละลาย: Increase sensitivity. Ensure the search coil is close to the ground.

For further assistance, please contact LOLARAN customer support.

7. ข้อมูลจำเพาะ

8. การรับประกันและการสนับสนุน

Your LOLARAN GT1000 Metal Detector Kit comes with a 2-year warranty, covering manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

For technical support, warranty service, or any questions regarding your product, please contact LOLARAN customer service through the retailer's platform or visit the official LOLARAN webเว็บไซต์สำหรับข้อมูลการติดต่อ