STF MSTWS-200

STF Beast MSTWS-200 Gaming Earbuds User Manual

Model: MSTWS-200

1. บทนำ

Thank you for choosing the STF Beast MSTWS-200 Gaming Earbuds. These earbuds are designed to provide an immersive gaming experience with ultra-low latency, clear communication, and extended battery life. This manual provides essential information for setting up, operating, and maintaining your earbuds.

2. เนื้อหาบรรจุภัณฑ์

กรุณาตรวจสอบแพ็คเกจสำหรับรายการต่อไปนี้:

  • STF Beast MSTWS-200 Gaming Earbuds (Left and Right)
  • เคสชาร์จไฟ
  • สายชาร์จ USB-C
  • จุกหูฟังซิลิโคนหลายขนาด
  • คู่มือการใช้งาน (เอกสารนี้)

3. สินค้าหมดview

Familiarize yourself with the components of your STF Beast MSTWS-200 Gaming Earbuds.

STF Beast MSTWS-200 Gaming Earbuds in their charging case, showcasing the sleek black design and RGB lighting.

Figure 3.1: STF Beast MSTWS-200 Gaming Earbuds and Charging Case

The earbuds feature a compact design with integrated touch controls and LED indicators. The charging case provides protection and additional battery life, also featuring an RGB light strip.

ภาพระยะใกล้ view of both STF Beast MSTWS-200 Gaming Earbuds, highlighting the in-ear design and touch control areas.

Figure 3.2: Individual Earbud Components

Each earbud is equipped with multiple microphones for clear voice pickup and Environmental Noise Cancellation (ENC).

Close-up of the STF Beast MSTWS-200 charging case, showing the USB-C charging port on the side.

Figure 3.3: Charging Case with USB-C Port

The charging case uses a USB-C port for convenient recharging.

4. การตั้งค่า

4.1 การชาร์จเริ่มต้น

  1. ใส่หูฟังเอียร์บัดทั้งสองข้างลงในกล่องชาร์จ
  2. Connect the USB-C charging cable to the port on the charging case and plug the other end into a 5V/1A power source.
  3. The RGB lighting on the case will indicate charging status. Allow approximately 1.5-2 hours for a full charge.

4.2 การจับคู่บลูทูธ

  1. ตรวจสอบให้แน่ใจว่าได้ชาร์จเอียร์บัดแล้ว
  2. เปิดกล่องชาร์จ หูฟังจะเข้าสู่โหมดจับคู่โดยอัตโนมัติ ซึ่งจะแสดงด้วยไฟ LED กะพริบบนหูฟัง
  3. บนอุปกรณ์ของคุณ (สมาร์ทโฟน แท็บเล็ต คอมพิวเตอร์ ฯลฯ) เปิดใช้งานบลูทูธและค้นหาอุปกรณ์ที่ใช้งานได้
  4. Select "STF MSTWS-200" from the list of found devices.
  5. เมื่อเชื่อมต่อเสร็จแล้ว ไฟ LED บนหูฟังจะหยุดกะพริบ และคุณจะได้ยินเสียงยืนยัน

4.3 การสวมหูฟัง

Choose the silicone eartips that provide the best seal and comfort for your ears. Insert the earbuds gently into your ear canal and twist slightly to secure them. A proper fit ensures optimal sound quality and noise isolation.

STF Beast MSTWS-200 Gaming Earbuds in their charging case, with four different sizes of silicone eartips laid out next to it.

Figure 4.1: Selecting the Correct Eartip Size

5. คู่มือการใช้งาน

5.1 เปิด/ปิดเครื่อง

  • เปิดเครื่อง: เปิดกล่องชาร์จ หูฟังจะเปิดโดยอัตโนมัติ หรือกดปุ่มควบคุมแบบสัมผัสบนหูฟังทั้งสองข้างค้างไว้ 3 วินาที
  • หมดแรง: ใส่หูฟังกลับเข้าไปในกล่องชาร์จแล้วปิดฝา หรือกดปุ่มควบคุมแบบสัมผัสบนหูฟังทั้งสองข้างค้างไว้ 5 วินาที

5.2 การเล่นเพลง

  • เล่น/หยุดชั่วคราว: แตะเพียงครั้งเดียวที่บริเวณควบคุมแบบสัมผัสบนหูฟังข้างใดข้างหนึ่ง
  • เพลงถัดไป: แตะที่หูฟังด้านขวาสองครั้ง
  • แทร็กก่อนหน้า: แตะที่หูฟังด้านซ้ายสองครั้ง
  • ปรับระดับเสียงขึ้น: แตะสามครั้งที่เอียร์บัดด้านขวา
  • ลดเสียงลง: แตะสามครั้งที่หูฟังข้างซ้าย

5.3 การจัดการการโทร

  • รับ/วางสาย: แตะเพียงครั้งเดียวที่บริเวณควบคุมแบบสัมผัสบนหูฟังข้างใดข้างหนึ่ง
  • ปฏิเสธสาย: กดปุ่มควบคุมแบบสัมผัสบนหูฟังข้างใดข้างหนึ่งค้างไว้ 2 วินาที

5.4 โหมดเล่นเกม (ความหน่วงต่ำ)

The MSTWS-200 features an ultra-low latency mode (30ms) for gaming. To activate or deactivate Gaming Mode:

  • เปิดใช้งาน/ปิดใช้งาน: Press and hold the touch control area on the right earbud for 2 seconds. You will hear an audio prompt indicating the mode change.

5.5 การตัดเสียงรบกวนจากสิ่งแวดล้อม (ENC)

The 4 built-in microphones utilize ENC technology to reduce ambient noise during calls, ensuring clear communication. This feature is active automatically during calls.

5.6 แสง RGB

The charging case features RGB LED lighting. This lighting indicates charging status and adds a visual element. The RGB lighting on the case is typically active when the case is open or charging.

6. การบำรุงรักษา

6.1 การทำความสะอาด

  • ใช้ผ้าแห้งนุ่มและไม่ขุยในการทำความสะอาดหูฟังและกล่องชาร์จ
  • ห้ามใช้สารทำความสะอาดที่มีฤทธิ์กัดกร่อน แอลกอฮอล์ หรือตัวทำละลายเคมี
  • ค่อยๆ ขจัดขี้หูหรือสิ่งสกปรกออกจากจุกหูฟังและตะแกรงลำโพงโดยใช้แปรงขนาดเล็กที่สะอาดหรือสำลีพันก้าน

6.2 พื้นที่จัดเก็บ

  • ควรเก็บหูฟังไว้ในกล่องชาร์จเมื่อไม่ได้ใช้งาน เพื่อปกป้องหูฟังและชาร์จไฟอยู่เสมอ
  • เก็บไว้ในที่แห้งและเย็น ห่างจากอุณหภูมิที่สูงและแสงแดดโดยตรง

6.3 การดูแลแบตเตอรี่

  • เพื่อยืดอายุการใช้งานแบตเตอรี่ ควรหลีกเลี่ยงการปล่อยให้หูฟังและเคสชาร์จหมดเกลี้ยงบ่อยๆ
  • ชาร์จอุปกรณ์เป็นประจำ แม้จะไม่ได้ใช้งานเป็นเวลานานก็ตาม

7 การแก้ไขปัญหา

If you encounter any issues with your STF Beast MSTWS-200 Gaming Earbuds, please refer to the following common solutions:

ปัญหาวิธีแก้ปัญหาที่เป็นไปได้
หูฟังเอียร์บัดไม่จับคู่
  • ตรวจสอบให้แน่ใจว่าหูฟังชาร์จแล้วและไม่ได้อยู่ในเคส
  • ปิดบลูทูธบนอุปกรณ์ของคุณและเปิดใหม่อีกครั้ง
  • Forget/delete "STF MSTWS-200" from your device's Bluetooth list and try pairing again.
  • Try resetting the earbuds (see 7.1 Earbud Reset).
ไม่มีเสียงจากเอียร์บัดข้างเดียว
  • ตรวจสอบให้แน่ใจว่าได้ชาร์จหูฟังเอียร์บัดทั้งสองข้างแล้ว
  • Place both earbuds back into the case, close the lid, wait a few seconds, then open again.
  • ลองรีเซ็ตหูฟังเอียร์บัด
เคสชาร์จไม่ชาร์จ
  • ตรวจสอบสาย USB-C และอะแดปเตอร์ไฟฟ้าว่าได้รับความเสียหายหรือไม่
  • ตรวจสอบให้แน่ใจว่าสายเคเบิลเชื่อมต่อกับตัวเครื่องและแหล่งจ่ายไฟอย่างแน่นหนาแล้ว
  • ลองใช้สาย USB-C หรืออะแดปเตอร์ไฟอื่น
ระดับเสียงต่ำหรือคุณภาพเสียงไม่ดี
  • ปรับระดับเสียงบนอุปกรณ์ที่เชื่อมต่อของคุณ
  • ตรวจสอบให้แน่ใจว่าจุกหูฟังแนบสนิทกับช่องหูของคุณ ลองใช้ขนาดต่างๆ ดู
  • ทำความสะอาดตะแกรงลำโพงของหูฟัง

7.1 Earbud Reset

หากคุณประสบปัญหาอย่างต่อเนื่อง การรีเซ็ตเป็นค่าเริ่มต้นจากโรงงานอาจช่วยแก้ไขปัญหาได้:

  1. ใส่หูฟังทั้งสองข้างลงในกล่องชาร์จและตรวจสอบให้แน่ใจว่ากำลังชาร์จอยู่
  2. On your device, delete or "forget" the "STF MSTWS-200" from your Bluetooth device list.
  3. With the earbuds in the case and the lid open, press and hold the reset button (if available, or the touch control area on both earbuds simultaneously) for approximately 10-15 seconds until the LED indicators flash rapidly, then turn off. (Note: Specific reset procedures may vary. Refer to the quick start guide if provided.)
  4. Close the case, then open it again to re-enter pairing mode and attempt to pair with your device.

8. ข้อมูลจำเพาะ

คุณสมบัติข้อมูลจำเพาะ
แบบอย่างMSTWS-200
การเชื่อมต่อแบบไร้สายบลูทูธ 5.3
ช่วงสายสูงสุด 15 เมตร
เส้นผ่านศูนย์กลางของลำโพง10 มม.
ช่วงความถี่20 เฮิรตซ์ - 20 กิโลเฮิรตซ์
อิมพีแดนซ์32 โอห์ม
ระดับความดันเสียง (dBSPL)108 เดซิเบล
อินพุตการชาร์จType C, 5 Vcc 1 A
ความจุแบตเตอรี่เอียร์บัด40 มิลลิแอมป์ (อันละ)
ความจุแบตเตอรี่กรณี300 มิลลิแอมป์
ระยะเวลาการใช้งานUp to 6 hours (earbuds), up to 24 hours total with charging case
ไมโครโฟนYes (4 built-in microphones)
ฟังก์ชัน ENCYes (Environmental Noise Cancellation)
แสงสว่างLED (RGB on case)
ความหน่วงของสัญญาณไร้สาย30 มิลลิวินาที (โหมดเกม)
การวางตำแหน่งหูอินเอียร์
อุปกรณ์ที่รองรับMobile Phones, Laptops, Desktop Computers, Tablets, Televisions, Video Game Consoles, Car Audio Systems, Smart Speakers

9. ข้อมูลการรับประกัน

The STF Beast MSTWS-200 Gaming Earbuds come with a รับประกันจำกัด 1 ปี นับจากวันที่ซื้อสินค้า การรับประกันนี้ครอบคลุมถึงข้อบกพร่องจากการผลิตและฝีมือการผลิตภายใต้การใช้งานปกติ ไม่ครอบคลุมถึงความเสียหายที่เกิดจากการใช้งานผิดวิธี อุบัติเหตุ การดัดแปลงโดยไม่ได้รับอนุญาต หรือการสึกหรอตามปกติ

โปรดเก็บหลักฐานการซื้อของคุณไว้เพื่อเรียกร้องการรับประกัน

10. การสนับสนุน

For further assistance, technical support, or warranty inquiries, please visit the official STF website or contact their customer service department. Contact information can typically be found on the product packaging or the STF brand store on Amazon.

STF Brand Store: Visit STF Store on Amazon

© 2024 STF. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.