CorDx ACT21002-25
CorDx Tyfast At Home Flu A/B and COVID-19 Multiplex Rapid Test
คู่มือการใช้งาน
สินค้าเกินview
The CorDx Tyfast At Home Flu A/B and COVID-19 Multiplex Rapid Test is designed for the qualitative detection of influenza A and B nucleoprotein antigens and SARS-CoV-2 nucleocapsid protein antigens from direct anterior nasal swab specimens. This test is intended for use as an aid in the diagnosis of influenza A and B and COVID-19. Results are available in just 10 minutes.
This product is authorized for use in the United States under an Emergency Use Authorization (EUA).
มีอะไรอยู่ในกล่อง
แต่ละชุดประกอบด้วยส่วนประกอบดังต่อไปนี้:
- (25) Covid & Flu-A/Flu-B Test Detection Cassettes
- (25) Nasal Swabs
- (25) สample Collection Tubes with pre-filled buffer solution
- (1) Instruction Manual & Quickstart Guide

Image: Contents of the CorDx Tyfast At Home Flu A/B and COVID-19 Multiplex Rapid Test kit.
ข้อมูลด้านความปลอดภัยที่สำคัญ
- สำหรับใช้ในการวินิจฉัยในหลอดทดลองเท่านั้น
- Do not use if you've had symptoms longer than 5 days or no symptoms at all.
- เก็บให้พ้นจากมือเด็ก
- Store the test kit at room temperature (36-86°F / 2-30°C).
- อย่าใช้การทดสอบที่หมดอายุ
- ปฏิบัติตามคำแนะนำทั้งหมดอย่างระมัดระวังเพื่อให้ได้ผลลัพธ์ที่ถูกต้อง
การติดตั้งและการเตรียมการ
Before you begin, ensure you have a clean, flat surface and all kit components are at room temperature.
- Wash your hands thoroughly with soap and water for at least 20 seconds.
- Open the foil pouch containing the test cassette just before use. Place the cassette on a clean, flat surface.
- เปิดสample collection tube and place it upright in a holder or a cup to prevent spills.
Operating Instructions: Performing the Test
Follow these steps carefully to perform the test:
- รวบรวมSampเลอ: Carefully remove the nasal swab from its packaging. Insert the entire soft tip of the swab into your left nostril about 0.5 to 1 inch until resistance is met. Firmly rub the swab in a circular motion against the inside of your nostril 5 times. Using the same swab, repeat the process in your right nostril 5 times.
- เตรียมสampเลอ: Immediately insert the swab tip into the sample collection tube. Swirl the swab vigorously in the liquid for at least 10 seconds, pressing the tip against the bottom and sides of the tube.
- Extract Sampเลอ: While squeezing the tube, remove the swab. Dispose of the swab in a biohazard bag or sealed plastic bag. Securely close the cap of the sampหลอดสะสมเลอ
- Add Drops to Cassette: พลิก sample collection tube and add 3 drops of the solution into the sample well (S) ของตลับทดสอบ
- รอผลลัพธ์: Set a timer for 10 minutes. Do not read the results before 10 minutes or after 15 minutes.

Image: Step-by-step visual guide for performing the test.

Image: Preparing the sample with the nasal swab and collection tube.
การอ่านผลลัพธ์ของคุณ
Interpret your test results between 10 and 15 minutes after adding the drops to the cassette. Do not interpret results after 15 minutes as they may be inaccurate.

Image: Visual guide for interpreting test results.
ผลลัพธ์เชิงบวก
A positive result is indicated by the presence of the Control line (C) and one or more of the test lines (COV, Flu B, Flu A). Even a faint line should be considered a positive result.
- COVID-19 Positive: Control line (C) and COVID line (COV) appear.
- Flu A Positive: Control line (C) and Flu A line appear.
- Flu B Positive: Control line (C) and Flu B line appear.
- Combinations of Flu A, Flu B, and COVID-19 positive results are also possible, indicated by the respective lines appearing along with the Control line.
ผลลบ
A negative result is indicated by the presence of only the Control line (C). No other lines (COV, Flu B, Flu A) appear.
ผลลัพธ์ไม่ถูกต้อง
An invalid result occurs if the Control line (C) is not visible. This means the test did not run correctly. Discard the test and repeat with a new kit, ensuring all steps are followed precisely.
การบำรุงรักษาและการเก็บรักษา
- Store the test kits in their original sealed pouches at room temperature (36-86°F / 2-30°C) until the expiration date printed on the packaging.
- Do not freeze the test kits.
- Once the foil pouch is opened, the test cassette should be used immediately.
- Dispose of used test components in accordance with local regulations for biohazardous waste.
การแก้ไขปัญหา
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| No lines appear on the test cassette. | ไม่เพียงพอample applied, or test performed incorrectly. | Ensure 3 drops of solution are added to the sample well. Repeat the test with a new kit, carefully following all instructions. |
| Only the Control line (C) is visible, but symptoms are present. | Negative result. The test did not detect antigens. | A negative result does not rule out infection. If symptoms persist or worsen, consult a healthcare professional. |
| Test lines (COV, Flu A, Flu B) appear without the Control line (C). | Invalid test. The test did not run correctly. | Discard the test and repeat with a new kit. Ensure the test is performed within the specified temperature range and all steps are followed. |
| Results are unclear or faint. | ไม่เพียงพอample, improper mixing, or reading outside the time window. | ตรวจสอบให้แน่ใจว่าเหมาะสมample collection and mixing. Read results strictly between 10 and 15 minutes. If still unclear, repeat the test. |
ข้อมูลจำเพาะผลิตภัณฑ์
- ชื่อสินค้า : CorDx Tyfast At Home Flu A/B and COVID-19 Multiplex Rapid Test
- หมายเลขรุ่น: ACT21002-25
- ประเภทการทดสอบ: Antigen Rapid Test (Qualitative)
- Sampประเภทไฟล์: ไม้กวาดจมูกด้านหน้า
- Time to Results: 10 นาที
- อุณหภูมิในการจัดเก็บ: 36-86°ฟาเรนไฮต์ (2-30°เซลเซียส)
- ผู้ผลิต: คอร์ดีเอ็กซ์
- ขนาดสินค้า : 6.3 x 5.12 x 3.31 นิ้ว
- น้ำหนักสินค้า: 10.55 ออนซ์
วิดีโอผลิตภัณฑ์อย่างเป็นทางการ
Video: "BTS Season | Test Early, Stay Informed" - An official video from CorDx Tyfast demonstrating the importance and ease of early testing for Flu A/B and COVID-19.
การรับประกันและการสนับสนุน
For product support, frequently asked questions, or to learn more about CorDx products, please visit the official CorDx webเว็บไซต์:
Please refer to the packaging for specific warranty information and contact details.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.