btfarm SL24

btfarm SL24 Solar String Lights Outdoor User Manual

Model: SL24 | Brand: btfarm

1. บทนำ

Thank you for choosing btfarm Solar String Lights. This manual provides essential information for the safe and efficient use of your product. These solar-powered string lights are designed for outdoor decorative lighting, featuring 8 lighting modes and a waterproof design for various weather conditions.

2. อะไรอยู่ในกล่อง

  • 4 x Copper Wire Small Lights (80 LED, 33 FT each)
  • 4 x แผงโซลาร์เซลล์
  • 4 x เดิมพันภาคพื้นดิน
  • สกรู 8 ตัว
  • 1 x คู่มือผู้ใช้
Contents of the btfarm solar string lights package, showing four coiled light strings, four solar panels with ground stakes, and a small bag of screws.

Image: The package contents, including four sets of coiled string lights, solar panels, and mounting hardware.

3. คำแนะนำในการตั้งค่า

  1. แกะส่วนประกอบ: นำรายการทั้งหมดออกจากบรรจุภัณฑ์อย่างระมัดระวัง
  2. Assemble Solar Panel: Attach the solar panel to either the ground stake or the wall-mount bracket using the provided screws. Ensure the solar panel is securely fastened.
  3. ตำแหน่งแผงโซล่าเซลล์ : Choose a location for the solar panel that receives 6-8 hours of direct sunlight daily. This is crucial for optimal charging. The solar panel can be inserted into the ground using the stake or mounted on a wall/fence using screws.
  4. Unravel String Lights: Gently uncoil the copper wire string lights. Be careful to avoid tangling or damaging the delicate wires.
  5. ค่าใช้จ่ายเริ่มต้น: Before first use, ensure the solar panel is exposed to direct sunlight for at least 8 hours with the power button in the 'ON' position. This will fully charge the internal battery.
Diagram showing two installation methods for the solar panel: mounted on a wall and inserted into the ground.

Image: Solar panel installation options, including ground insertion and wall mounting.

Illustration showing a solar panel charging during the daytime and lights automatically illuminating at night.

Image: Solar panel charging during the day and automatic night illumination.

คู่มือวิดีโอการตั้งค่า

วิดีโอ: จบแล้วview of the btfarm solar fairy lights, demonstrating unboxing and initial setup steps.

4. คู่มือการใช้งาน

  1. เปิด/ปิดเครื่อง: Locate the 'ON/OFF' button on the back of the solar panel. Press it to turn the lights on or off. The lights will only illuminate in dark conditions when the solar panel is covered or at night.
  2. เลือกโหมดแสงสว่าง: Press the 'MODE' button on the back of the solar panel to cycle through the 8 available lighting modes (Combination, In Waves, Sequential, Slow Glow, Chasing, Slow Fade, Twinkle/Flash, Steady On). The built-in memory function will save your last selected mode.
  3. การทำงานอัตโนมัติ: Once powered on and a mode is selected, the lights will automatically turn on at dusk and turn off at dawn, provided the solar panel receives sufficient sunlight during the day.
  4. Daytime Testing: To test the lights during the day, cover the solar panel completely. The lights should illuminate if the battery has a charge and the unit is powered on.
Collage of outdoor scenes decorated with multicolor solar string lights, illustrating the 8 different lighting modes.

Image: Various outdoor settings showcasing the 8 lighting modes of the solar string lights.

5. การบำรุงรักษา

  • การทำความสะอาดแผงโซลาร์เซลล์: เช็ดแผงโซล่าเซลล์ด้วยผ้านุ่มๆ เป็นประจำamp ผ้าสำหรับเช็ดฝุ่น สิ่งสกปรก หรือเศษขยะ แผงที่สะอาดช่วยให้ดูดซับแสงแดดและชาร์จได้อย่างมีประสิทธิภาพสูงสุด
  • ความทนทานต่อสภาพอากาศ: The light string and solar panel are IP65 waterproof, designed to withstand rain, sun, and snow. However, avoid submerging the unit in water.
  • การจัดการสายไฟ: The copper wires are delicate. Handle them with care during installation and adjustment to prevent breakage or tangling.
Close-up of a solar panel and string lights in a garden setting during rain, highlighting the waterproof design.

Image: Solar panel and lights in a rainy garden, demonstrating waterproof capabilities.

6 การแก้ไขปัญหา

  • ไฟไม่เปิด:
    • Ensure the 'ON/OFF' button is in the 'ON' position.
    • Verify the solar panel is receiving adequate direct sunlight (6-8 hours) for charging.
    • Check if the solar panel is covered or if it is dark enough for the lights to activate automatically.
  • Lights Dimming or Short Operating Time:
    • The solar panel may not be receiving enough direct sunlight. Relocate it to a sunnier spot.
    • The battery may not be fully charged. Allow for a full day of charging before expecting 10-14 hours of illumination.
    • ตรวจสอบให้แน่ใจว่าแผงโซลาร์เซลล์สะอาดและปราศจากสิ่งกีดขวาง
  • Physical Damage to Wires:
    • The copper wires are thin and can tangle or break if not handled carefully. Inspect for any visible damage.
    • Note that these units are not designed to connect multiple strings to a single solar panel. Each string light set operates independently with its own solar panel.

7. ข้อมูลจำเพาะ

ยี่ห้อบีทีฟาร์ม
หมายเลขรุ่นSL24
สีหลากสี
ปริมาณ LED320 (80 LEDs per 33 FT string)
ความยาวรวม132 FT (4 x 33 FT strings)
ความยาวของลวดตะกั่ว6.5 FT (from solar panel to first LED)
แหล่งพลังงานพลังงานแสงอาทิตย์
ระดับการกันน้ำIP65
โหมดแสงสว่าง8 (Combination, In Waves, Sequential, Slow Glow, Chasing, Slow Fade, Twinkle/Flash, Steady On)
วัสดุทองแดง, พลาสติก
น้ำหนักสินค้า1.01 ปอนด์ (0.46 กิโลกรัม)

8. การรับประกันและการสนับสนุน

btfarm offers the following for your product:

  • การรับรองคุณภาพ: 365 วัน
  • บริการลูกค้า: 24 hours, 7 days a week online support.
  • การคืนสินค้าและการแลกเปลี่ยน: ส่งคืนและเปลี่ยนสินค้าฟรี 30 วัน

For further assistance, please refer to the contact information provided with your purchase or visit the official btfarm store.

© 2025 btfarm. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.