BoxWave ClearTouch Crystal Screen Protector for Autophix 1100 Instruction Manual

1. บทนำ

This manual provides instructions for the proper installation, usage, and maintenance of your BoxWave ClearTouch Crystal Screen Protector for the Autophix 1100 device. Please read these instructions carefully before proceeding with installation.

เนื้อหาแพ็คเกจ

• Two (2) ClearTouch Crystal Screen Protectors
• One (1) ClearTouch Applicator Card
• One (1) Microfiber Cleaning Cloth
• One (1) Dust Removing Sticker

คุณสมบัติผลิตภัณฑ์

• ความชัดเจน: Provides 99% visual transparency for vibrant color display.
• การป้องกัน: Shields your device screen from scratches and dust.
• พอดีอย่างแม่นยำ: Custom-cut to match the exact dimensions of the Autophix 1100.
• ปราศจากสารตกค้าง: Utilizes a glueless adhesive that leaves no sticky residue upon removal.

2. คู่มือการติดตั้ง

Follow these steps carefully to ensure a smooth and bubble-free installation of your screen protector.

1. ทำความสะอาดหน้าจออุปกรณ์ของคุณ: Use the provided microfiber cleaning cloth to thoroughly clean the screen of your Autophix 1100. Ensure all dust, fingerprints, and smudges are removed. For stubborn marks, a screen cleaner (not included) can be used sparingly.
2. กำจัดฝุ่น: Use the dust removing sticker to lift any remaining dust particles from the screen. Lightly dab the sticker across the screen surface.
3. Peel Back Layer 1: Carefully peel back the protective layer labeled '1' from one end of the screen protector. Avoid touching the adhesive side.
4. จัดวางและประยุกต์ใช้: Align the exposed adhesive edge of the screen protector with one edge of your device screen. Once aligned, slowly and steadily lower the rest of the screen protector onto the device, peeling back layer '1' as you go.
5. ปรับฟองให้เรียบ: Use the applicator card to gently push out any air bubbles towards the edges of the screen protector. Start from the center and work your way outwards.
6. Remove Layer 2: Once the screen protector is applied and most bubbles are removed, carefully peel off the top protective layer labeled '2'.
7. การปรับให้เรียบขั้นสุดท้าย: Perform a final pass with the microfiber cloth to remove any remaining small bubbles or smudges on the surface of the newly applied protector.

บันทึก: The special low-tack adhesive may take up to 2 days of regular use to fully adhere around the edges, allowing any small air gaps to clear out naturally.

3. การใช้และการดูแลรักษา

การใช้งานทั่วไป

The ClearTouch Crystal screen protector is designed to maintain the original touch sensitivity and display clarity of your Autophix 1100. Operate your device as usual.

การทำความสะอาดและการบำรุงรักษา

To clean your screen protector, gently wipe it with the provided microfiber cleaning cloth. For more thorough cleaning, dampen the cloth slightly with water or a screen-safe cleaning solution. Avoid harsh chemicals or abrasive materials, as these can damage the protector's surface.

4 การแก้ไขปัญหา

• ฟองอากาศหลังการติดตั้ง: Small bubbles are common immediately after installation. Use the applicator card to push them towards the nearest edge. For very small bubbles, allow 24-48 hours for them to dissipate naturally as the adhesive fully cures.
• แผ่นกันฝุ่นใต้แผ่นป้องกัน: If dust particles are trapped under the protector, carefully lift the nearest corner of the protector with a piece of tape, use the dust removing sticker to lift the particle, and then reapply the protector.
• การจัดตำแหน่งที่ไม่ถูกต้อง: If the protector is significantly misaligned, you may carefully peel it off, clean both the device screen and the protector (if no dust has adhered to the adhesive side), and attempt reinstallation. The ClearTouch Crystal is designed for reusability and installation forgiveness.

5. ข้อมูลจำเพาะผลิตภัณฑ์

6. ข้อมูลการสนับสนุน

For further assistance, technical support, or warranty inquiries regarding your BoxWave ClearTouch Crystal Screen Protector, please contact BoxWave Corporation directly.

ผู้ผลิต: บริษัท บ็อกซ์เวฟ คอร์ปอเรชั่น
Webเว็บไซต์: www.boxwave.com (โปรดอ้างอิงถึงเจ้าหน้าที่ webเว็บไซต์สำหรับข้อมูลการติดต่อล่าสุด)

Please have your product model (Autophix 1100) and purchase details ready when contacting support.