Topyond Ebike LCD Display User Manual

1. บทนำ

The Topyond Ebike LCD Display is designed to provide essential real-time information for your electric bike or scooter. This display meter allows you to monitor speed, distance traveled, battery level, and other critical performance metrics, enabling informed decisions during your ride. Crafted from high-quality ABS material, it ensures durability and resistance to wear and tear. Its compact design with a 22.5mm diameter ensures broad compatibility and ease of installation across various electric scooter and bike models.

2. ข้อมูลด้านความปลอดภัย

• ตรวจสอบให้แน่ใจเสมอว่าจอแสดงผลติดตั้งแน่นสนิทก่อนขี่รถ
• Do not attempt to disassemble or modify the display, as this may void the warranty and cause damage.
• Keep the display clean and free from excessive moisture. While waterproof, prolonged submersion is not recommended.
• Avoid extreme temperatures, both hot and cold, to ensure optimal performance and longevity.
• If any unusual behavior or error codes appear, refer to the troubleshooting section or contact support.

3. เนื้อหาบรรจุภัณฑ์

โปรดตรวจสอบว่าสินค้าทั้งหมดมีอยู่ในแพ็คเกจของคุณ:

• 1 x Topyond Electric Bike LCD Display Meter
• 1 x คู่มือผู้ใช้

4. สินค้าหมดview

The Topyond Ebike LCD Display features a clear screen and intuitive button layout for easy operation. Below are images illustrating the display from various angles, highlighting its design and key features.

5. การตั้งค่าและการติดตั้ง

The Topyond Ebike LCD Display is designed for easy installation on handlebars with a 22.5mm diameter. Follow these steps to properly install your display:

1. เลือกสถานที่: Select a suitable position on your ebike's handlebar, typically near the grip, ensuring it does not obstruct braking or shifting.
2. ติดตั้งจอแสดงผล: Loosen the screw on the display's mounting bracket. Place the display on the handlebar and tighten the screw until it is secure. Ensure the display is oriented correctly for optimal viewการไอเอ็นจี
3. เชื่อมต่อสายเคเบิล: Connect the display's cable to the corresponding connector on your ebike's controller or wiring harness. Ensure the 5-pin connector is firmly seated. The line sequence of the label connector is typically: Red (VCC), Black (GND), Blue (TX), Green (RX), Yellow (DS).
4. ทดสอบฟังก์ชันการทำงาน: After installation, turn on your ebike to verify the display powers on and shows information correctly.

6. คู่มือการใช้งาน

The Topyond Ebike LCD Display provides various functions and settings to enhance your riding experience. Familiarize yourself with the buttons and display information.

6.1. ปุ่มฟังก์ชัน

• ปุ่มเปิด/ปิด (ตรงกลาง): Press and hold to turn the display ON/OFF. Short press to switch between ODO (Odometer), TRIP (Trip Distance), VOL (Voltage), and TIME.
• '+' Button (Top): Short press to increase parameter values or navigate menus.
• '-' Button (Bottom): Short press to decrease parameter values or navigate menus.
• เข้าสู่การตั้งค่า: To enter the settings menu, press and hold the '+' and '-' buttons simultaneously.

6.2. Display Functions (LCD-930 Hand Control Panel)

The display provides comprehensive information at a glance:

• จอแสดงความเร็ว: Shows current speed (AVG: average speed, MAX: maximum speed).
• ไฟแสดงสถานะพลังงาน: แสดงระดับแบตเตอรี่
• บ่งชี้ความผิดปกติ: Displays error codes if issues occur.
• ระยะทางรวม (ODO): Cumulative distance traveled.
• ระยะทางเดี่ยว (TRIP): Distance for the current ride.
• Single Boot Time (TIME): ระยะเวลาของการเดินทางครั้งนี้
• ปริมาณแบตเตอรี่tagอี (เล่ม): ปริมาณแบตเตอรี่ปัจจุบันtage.
• ดีเอสที: ระยะทาง.
• ความทนทาน: Estimated remaining range.

6.3. Settings and Parameters (P09-P15 Menu)

To access and modify advanced settings, enter the P09-P15 menu by holding the '+' and '-' buttons. Use '+' and '-' to navigate and change values, and the Power button to confirm or exit.

• P01: Backlight Brightness: Adjusts display backlight (Level 1-3).
• P02: Mileage Unit: 0 for KM, 1 for MILE.
• P03: ฉบับtagอีระดับ: ตั้งค่าปริมาณแบตเตอรี่tage (24V, 36V, 48V, 60V). Default is 36V.
• P04: Dormancy Time: Sets the time until the display enters sleep mode (0: no dormancy, 1-60 minutes).
• P05: ช่วยด้วย File: 0, 3 file โหมด.
• P06: Wheel Diameter: Sets the wheel diameter in inches for accurate speed and distance readings.
• P07: Speed Gauge Magnetic Steel Number: Sets the number of magnetic steel poles for the speed sensor.
• P08: Speed Limit: Sets the maximum speed (0-100km/h).
• P09: Zero Start/Non-Zero Start: 0 for zero start, 1 for non-zero start.
• P10: Drive Mode: 0 for power drive, 1 for electric drive (throttle), 2 for power drive and electric drive coexistence.
• P11: Help Sensitivity Setting Range: 1-24.
• P12: Help Start Intensity Setting Range: 0-5.
• P13: การตั้งค่าประเภทดิสก์เหล็กแม่เหล็กไฟฟ้า: 5, 8, 12 Magnetic Steel Types.
• P14: Controller Limit Value Set Default: 12A range: 1-20A.
• P15: Controller Under Voltage.

7. การบำรุงรักษา

Proper maintenance ensures the longevity and optimal performance of your Topyond Ebike LCD Display.

• การทำความสะอาด: ใช้แบบนุ่มๆamp cloth to wipe the display screen and body. Avoid abrasive cleaners or solvents that could damage the ABS material or screen.
• การสัมผัสน้ำ: While the display is waterproof, avoid high-pressure water jets directly on the unit. Dry any moisture promptly after exposure to rain.
• พื้นที่จัดเก็บ: When not in use for extended periods, store the ebike and display in a cool, dry place away from direct sunlight and extreme temperatures.
• การตรวจสอบสายเคเบิล: Periodically check the connection cables for any signs of wear, fraying, or damage. Ensure connections remain secure.

8 การแก้ไขปัญหา

If you encounter issues with your Topyond Ebike LCD Display, refer to the common problems and their solutions below. The display may show specific error codes to help diagnose the problem.

8.1. Vehicle Status Code Meanings

8.2. เคล็ดลับการแก้ไขปัญหาทั่วไป

• จอแสดงผลไม่เปิด: Ensure the battery is charged and properly connected. Check all cable connections between the display and the ebike's system.
• การอ่านไม่ถูกต้อง: Verify that the wheel diameter (P06) and magnetic steel number (P07) settings are correctly configured in the display's parameters.
• ปุ่มไม่ตอบสนอง: Check for any physical obstructions or debris around the buttons. If the issue persists, a factory reset (if available) or professional inspection may be needed.

9. ข้อมูลจำเพาะ

Detailed technical specifications for the Topyond Ebike LCD Display:

10. การรับประกันและการสนับสนุน

Topyond is committed to providing high-quality products. For any questions, technical assistance, or warranty claims, please refer to the contact information provided with your purchase or visit the official Topyond store on Amazon. Please retain your proof of purchase for warranty purposes.