Nilfisk Advance SC100

คู่มือการใช้งานเครื่องขัดพื้นอัตโนมัติแบบตั้งพื้น Nilfisk Advance SC100

แบบ: SC100

1. บทนำ

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Nilfisk Advance SC100 Upright Automatic Scrubber. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.

Nilfisk Advance SC100 Upright Automatic Scrubber, front view

รูปที่ 1 : ด้านหน้า view of the Nilfisk Advance SC100 Upright Automatic Scrubber, showcasing การออกแบบที่กะทัดรัด

2. ข้อมูลด้านความปลอดภัย

Always observe the following safety precautions to prevent injury to personnel or damage to the machine.

  • Ensure the power cord is disconnected from the electrical outlet before performing any maintenance, cleaning, or when the machine is not in use.
  • Do not operate the machine in hazardous environments or near flammable liquids, gases, or dust.
  • Use only cleaning solutions recommended by Nilfisk Advance. Refer to the solution manufacturer's safety data sheet.
  • Keep hands, feet, and loose clothing clear of moving parts, such as the brush and squeegee, during operation.
  • Store the machine in a dry, secure location, away from extreme temperatures and unauthorized access.
  • เครื่องได้รับการออกแบบสำหรับใช้ภายในอาคารเท่านั้น

3. การติดตั้งและการประกอบ

3.1 การแกะกล่อง

Carefully remove all components from the packaging. Verify that all parts listed in the packing list are present and undamaged. Report any shipping damage immediately to your supplier.

3.2 การประกอบเบื้องต้น

  1. สิ่งที่แนบมากับด้ามจับ: Attach the handle assembly to the main unit, ensuring it clicks securely into place. Refer to the diagrams for correct orientation.
  2. การเชื่อมต่อสายไฟ: Connect the detachable yellow safety cord (part number 107416428) to the designated port on the machine. Ensure the cord is fully unwound before plugging into a power outlet to prevent overheating.
  3. การติดตั้งแปรง: Verify that the medium nylon brush (part number 107411860) is correctly installed at the base of the scrubber. It should be securely seated and able to rotate freely.

4. คู่มือการใช้งาน

4.1 การเติมสารละลายลงในถัง

  1. ตรวจสอบให้แน่ใจว่าได้ถอดปลั๊กเครื่องออกจากแหล่งจ่ายไฟแล้ว
  2. Locate and open the solution tank cap.
  3. Fill the solution tank with clean water and the appropriate cleaning solution, adhering to the manufacturer's dilution ratios. Do not exceed the 0.8 gal (3 L) capacity.
  4. Securely close the solution tank cap to prevent spills during operation.

4.2 การสตาร์ทเครื่อง

  1. Plug the 33 ft (10m) detachable yellow safety cord into a grounded 110 V power outlet.
  2. Lower the handle to the operating position. Note that all machine functions, including the brush and squeegee, stop when the handle is in the upright position.
  3. Select the desired solution flow setting (0.05 or 0.11 gal/min) using the controls on the handle. A red LED indicator will illuminate if the solution tank is empty, signaling the need for a refill.
  4. Engage the brush and vacuum motor using the designated controls on the ergonomic handle.

4.3 ขั้นตอนการทำความสะอาด

Guide the scrubber across the floor at a steady, consistent pace. The SC100 is designed for single-pass scrub and dry performance, effectively removing dirt and water. Overlap each pass slightly to ensure complete and uniform cleaning coverage.

4.4 การหยุดเครื่อง

  1. Lift the handle to the upright position to automatically stop all operating functions.
  2. ถอดสายไฟออกจากเต้ารับไฟฟ้า

5. การบำรุงรักษา

5.1 Emptying and Cleaning the Recovery Tank

The SC100 features a flat recovery tank design with full access, making it fast and easy to clean. Empty and thoroughly rinse the recovery tank after each use to prevent the buildup of dirt, odors, and bacteria.

  1. ตรวจสอบให้แน่ใจว่าได้ถอดปลั๊กเครื่องแล้ว
  2. ถอดถังกู้คืนออกจากเครื่อง
  3. Dispose of the dirty water in an appropriate drain.
  4. Rinse the tank thoroughly with clean water and allow it to air dry completely before reinstallation.
  5. Reinstall the recovery tank securely onto the machine.

5.2 Brush and Squeegee Maintenance

  • การตรวจสอบแปรง: Regularly inspect the medium nylon brush (107411860) for wear, damage, or embedded debris. Clean the brush as needed, and replace it when bristles show significant wear to maintain cleaning effectiveness.
  • Squeegee Blade Check: Check the squeegee blades for cuts, tears, or excessive wear. Worn or damaged blades will impair water pickup. Replace blades as necessary to ensure optimal drying performance.

5.3 การทำความสะอาดทั่วไป

เช็ดพื้นผิวด้านนอกของตัวเครื่องด้วยโฆษณาamp cloth after each use. Do not use abrasive cleaners or solvents, as these can damage the machine's finish.

ด้านข้าง view of Nilfisk Advance SC100 Scrubber, showing handle and cord management

รูปที่ 2: ด้านข้าง view illustrating the compact design and integrated cord management for the Nilfisk Advance SC100.

6 การแก้ไขปัญหา

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
เครื่องไม่เริ่มทำงานPower cord not securely connected; Handle in upright (parked) position; Circuit breaker tripped or fuse blown.Check power connection and outlet; Lower handle to operating position; Reset circuit breaker or replace fuse.
Poor water pickup / StreakingWorn or damaged squeegee blades; Recovery tank full; Vacuum motor issue or clogged vacuum hose.Inspect and replace squeegee blades; Empty recovery tank; Check vacuum hose for obstructions; Contact service if vacuum motor is faulty.
ไม่มีขั้นตอนการแก้ปัญหาSolution tank empty; Clogged solution line or filter; Solution flow setting is off.Refill solution tank; Inspect and clear solution line/filter; Adjust solution flow setting.
Machine leaves excessive foamIncorrect cleaning solution used; Too much detergent.Use low-foaming or anti-foaming solution; Reduce detergent concentration.

7. ข้อมูลจำเพาะ

  • แบบอย่าง: SC100
  • พลัง: 110 V, Cord-Electric
  • ความยาวสายไฟ: 33 ft (10 m) (Detachable Yellow Safety Cord 107416428)
  • ความกว้างในการทำความสะอาด: 12.2 นิ้ว (31 ซม.)
  • ชนิดแปรง: Cylindrical (Medium Nylon Brush 107411860)
  • ความเร็วแปรง: 2,100 รอบต่อนาที
  • ความจุถังสารละลาย: 0.8 แกลลอน (3 ลิตร)
  • ความจุถังพักน้ำ: 1 แกลลอน (4 ลิตร)
  • Solution Flow: 0/0.05/0.11 gal/min (0/0.2/0.42 L/min)
  • ความกว้างของไม้ปาดน้ำ: 12.6 นิ้ว (32.1 ซม.)
  • มอเตอร์สูญญากาศ: 0.94 แรงม้า (700 วัตต์)
  • Airflow, max.: 33.9 CFM (16 L/sec)
  • Waterlift, max.: 72 in H2O (180 mBar)
  • ระดับเสียง: 72 ± 2 dB A
  • ขนาด (ยาว x กว้าง x สูง): 15.75 นิ้ว x 14.2 นิ้ว x 45.3 นิ้ว (40 ซม. x 36 ซม. x 115 ซม.)
  • Weight (with Cord): 26.5 lb (12 kg) / 33.1 lb (15 kg) with solution
  • Performance per hour (theoretical / practical): 2,434 / 1,590 sq ft (226 / 147 sq m)

8. การรับประกันและการสนับสนุน

For detailed warranty information, terms, and conditions, please refer to the documentation provided at the time of purchase. It is recommended to retain your purchase receipt as proof of purchase for any warranty claims.

For technical support, service, or to order replacement parts, please contact Nilfisk Advance customer service or an authorized service center. Contact information can typically be found on the Nilfisk Advance official webไซต์หรือในบรรจุภัณฑ์ผลิตภัณฑ์ของคุณ

When contacting support, please have your product model (SC100) and serial number readily available.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.