APOLLO Manual Pallet Jack (Model A-1001) Instruction Manual

1. ข้อมูลด้านความปลอดภัย

Read and understand all instructions before operating this pallet jack. Failure to follow safety guidelines can result in serious injury or property damage.

• ความจุในการรับน้ำหนัก: Do not exceed the maximum rated load capacity of 5500 lbs (2495 kg).
• ความเสถียรในการโหลด: Ensure loads are centered and stable on the forks. Unevenly distributed loads can cause tipping.
• พื้นผิวการทำงาน: Operate the pallet jack on flat, level, and clear surfaces. Avoid slopes, uneven ground, or obstacles.
• อุปกรณ์ป้องกันส่วนบุคคล (PPE): Always wear appropriate safety footwear and gloves when operating.
• เคลียร์สต๊อก : Maintain a safe distance from other personnel, equipment, and walls.
• Lowering Speed: Control the lowering speed to prevent sudden drops and potential damage to goods or injury.
• การซ่อมบำรุง: Regularly inspect the pallet jack for damage, wear, or leaks. Do not operate a damaged unit.
• เด็กและบุคคลที่ไม่ได้รับอนุญาต: ห้ามเด็กและบุคคลที่ไม่ได้รับอนุญาตเข้าใกล้บริเวณผ่าตัด

2. สินค้าหมดview

The APOLLO Model A-1001 Manual Pallet Jack is designed for efficient material handling, offering a robust solution for moving heavy loads on pallets. Key features include:

• ความจุ: 5500 lbs (2495 kg) maximum load.
• ขนาดส้อม: 21 inches wide by 48 inches long.
• ช่วงยก: Maximum lifting height of 7.3 inches (18.5 cm) and a lowered fork height of 3 inches (7.6 cm).
• รับมือ: Ergonomic rubber-covered handle with a 3-function control (raise, neutral, lower).
• ระบบปั้มน้ำ : Integrated hydraulic pump for reliable lifting. Approximately 12 pump strokes for maximum lift.
• ล้อ: 7.1-inch nylon steering wheels and 2.9-inch single nylon fork rollers for smooth movement.
• การก่อสร้าง: Welded joints and reinforced fork tips for enhanced durability.

2.1. การระบุส่วนประกอบ

Figure 1: Key Components of the Pallet Jack. This image highlights the control lever, auto-return handle, ergonomic reinforced handle, and the high-quality wheels and bearings.

Figure 2: Pallet Jack Dimensions. This diagram illustrates the overall height (47.8"), overall length (63.5"), fork length (48"), fork width (21"), and maximum lifting height (7.3").

Figure 3: Detailed Fork Dimensions. This image provides specific measurements for the fork width (6.3"), thickness (2.1"), inside distance between forks (7.9"), and lowered fork height (3").

3. การติดตั้งและการประกอบ

The APOLLO Pallet Jack requires partial assembly, primarily the installation of the handle.

3.1. การติดตั้งมือจับ

1. แกะส่วนประกอบทั้งหมดออกและตรวจสอบให้แน่ใจว่าส่วนประกอบทั้งหมดอยู่ครบ
2. Align the handle base with the mounting point on the pump assembly.
3. Insert the provided pin to secure the handle to the pump assembly. Ensure the pin is fully engaged and secured.
4. Verify that the control lever on the handle operates smoothly and engages the lift/lower/neutral functions.

Figure 4: Ergonomic Handle. The handle is designed for comfortable grip and control.

Figure 5: Integrated Hydraulic Pump. This image shows the robust hydraulic pump system.

4. คู่มือการใช้งาน

Follow these steps for safe and effective operation of your pallet jack.

4.1. Moving the Pallet Jack

To move the pallet jack without a load, ensure the control lever is in the เป็นกลาง position. This allows the handle to move freely and prevents accidental lifting or lowering.

4.2. การยกของหนัก

1. Position the pallet jack: Carefully guide the forks completely under the pallet. Ensure the load is centered on the forks.
2. Set the control lever: Move the control lever on the handle to the ยก ตำแหน่ง.
3. Pump the handle: Pump the handle up and down repeatedly. The forks will gradually lift the pallet. Continue pumping until the pallet is clear of the ground and ready for transport.

4.3. Transporting a Load

Once the load is lifted, move the control lever to the เป็นกลาง position. This disengages the hydraulic pump, allowing you to pull or push the pallet jack and its load to the desired location. Ensure a clear path and maintain control of the handle.

4.4. การลดภาระ

1. Position the load: Carefully position the pallet over the desired resting spot.
2. Set the control lever: Move the control lever on the handle to the ต่ำกว่า position. The forks will slowly descend.
3. Controlled descent: For a controlled descent, gently move the lever to the lower position. The speed of descent can be regulated by the lever.
4. Alternatively, use the foot pedal: The pallet jack also features a foot pedal for lowering control. Press the foot pedal to lower the forks.

Figure 6: Durable Construction. This image highlights the smooth welding and double-layer baking varnish for scratch resistance.

Figure 7: Thickening Tow Bar. The robust tow bar design ensures stability during movement.

5. การบำรุงรักษา

Regular maintenance ensures the longevity and safe operation of your APOLLO Pallet Jack.

• น้ำมันไฮดรอลิก: Check the hydraulic fluid level periodically. Refer to the pump unit for specific fluid type and refill instructions.
• การหล่อลื่น: Lubricate all moving parts, including wheel bearings, pivot points, and the handle mechanism, with appropriate grease or oil at regular intervals.
• การตรวจสอบล้อ: Inspect wheels and rollers for wear, damage, or debris. Replace worn wheels to maintain smooth operation.
• การทำความสะอาด: Keep the pallet jack clean and free of dirt, dust, and corrosive materials.
• พื้นที่จัดเก็บ: Store the pallet jack in a dry, protected area when not in use.

Figure 8: Nylon Wheels. The durable nylon wheels provide smooth movement.

6 การแก้ไขปัญหา

โปรดดูหัวข้อนี้เพื่อดูปัญหาทั่วไปและวิธีแก้ไข

7. ข้อมูลจำเพาะ

8. การรับประกันและการสนับสนุน

For any questions, concerns, or support regarding your APOLLO Pallet Jack, please contact APOLLOLIFT customer service.

• การส่งคืน: ผลิตภัณฑ์นี้สามารถคืนได้ภายใน 30 วัน โปรดดูเอกสารการซื้อของคุณสำหรับนโยบายการคืนสินค้าโดยละเอียด
• การสนับสนุนลูกค้า: Contact APOLLOLIFT directly for assistance.
• แผนการคุ้มครอง: Optional protection plans may be available for purchase. Refer to your retailer for details.