UNIVER M11 Electric Mason Jar Vacuum Sealer Kit

สินค้าเกินview

The UNIVER M11 Electric Mason Jar Vacuum Sealer Kit is designed to create an airtight vacuum seal on Mason jars, extending the freshness and shelf life of various foods. This portable and rechargeable device is suitable for both wide-mouth and regular-mouth canning jars, making food preservation simple and efficient.

Image: The UNIVER M11 Electric Mason Jar Vacuum Sealer Kit, shown with its main unit, wide and regular mouth sealing cups, USB-C charging cable, bottle cap opener, and colorful lid labels.

Image: A visual comparison highlighting the UNIVER M11's one-button automatic operation on a jar of broccoli, contrasting it with manual vacuum sealing methods that require more effort and accessories.

การตั้งค่า

ส่วนประกอบที่รวมอยู่

• 1 x Electric Vacuum Seal Machine (M11)
• 1 x Wide-Mouth Canning Jar Cup
• 1 x Regular-Mouth Canning Jar Cup
• สายชาร์จ 1 x USB-C
• 1 x Bottle Cap Opener
• 1 x คู่มือผู้ใช้
• Label Stickers (for recording food storage details)

การชาร์จอุปกรณ์

Before first use, fully charge the UNIVER M11 vacuum sealer. Connect the provided USB-C cable to the charging port on the device and a suitable USB power source. A full charge typically takes approximately 2 hours and provides enough power for about 5 hours of continuous vacuum sealing.

ภาพ: ด้านบน view of the UNIVER M11 sealer showing its digital display indicating 100% battery and the Type-C charging port, along with its dimensions.

Assembling for Jar Size

The UNIVER M11 is designed with a split mechanism to accommodate both regular and wide-mouth Mason jars. For regular-mouth jars, the bottom piece of the sealer remains attached. For wide-mouth jars, gently twist and pull the bottom piece to detach it, revealing the wider sealing surface.

Image: A diagram illustrating the UNIVER M11's split design, showing how the bottom component detaches to switch between sealing regular-mouth (2.75 inches) and wide-mouth (3.4 inches) Mason jars.

Preparing Jars for Sealing

Ensure the rim of the Mason jar and the lid are clean and dry before sealing. Any moisture or food particles can compromise the vacuum seal. For solid foods like fruits and pickles, leave approximately 0.5 inches of headspace. For soft foods like jams and jellies, leave about 1 inch of headspace.

Image: A visual guide demonstrating the correct preparation of Mason jars for vacuum sealing, including wiping the rim clean and leaving appropriate headspace for solid (0.5 inches) and soft (1 inch) foods.

คำแนะนำการใช้งาน

Step-by-Step Sealing Process

1. Place the Mason jar lid securely on the jar.
2. Position the UNIVER M11 vacuum sealer directly over the lid, ensuring it is centered and firmly pressed down onto the jar.
3. Press the 'ON' button on the top of the sealer. The device will automatically begin to extract air from the jar.
4. Allow the sealer to operate for approximately 6-8 seconds (or until the vacuum process is complete, indicated by the device stopping automatically). The display will show the remaining time.
5. Once complete, carefully remove the sealer from the jar. The lid should now be securely sealed.

Image: A four-panel visual guide demonstrating the simple steps to vacuum seal a Mason jar: placing the lid, positioning the sealer, pressing the start button, and the final sealed jar.

ระยะเวลาการเก็บรักษาอาหาร

Vacuum sealing significantly extends the freshness of various foods. Refer to the table below for estimated storage durations:

Note: These are approximate durations and may vary based on food type, initial freshness, and storage conditions.

การซ่อมบำรุง

Cleaning the Sealer

To maintain optimal performance, wipe the exterior of the vacuum sealer with a damp cloth after each use. Ensure no food particles or moisture remain on the sealing surfaces or inside the cups. Do not submerge the main unit in water.

Silicone Ring Adjustment

The silicone sealing ring inside the vacuum sealer is crucial for creating an effective seal. Frequent use may cause the silicone ring to dislocate, which can lead to seal failure. Before each use, visually inspect the silicone ring. If it appears dislodged, gently adjust it back to its original, proper position to ensure a tight seal.

Image: A visual comparison showing the correct and incorrect positioning of the internal silicone sealing ring within the vacuum sealer, emphasizing the importance of proper alignment for effective sealing.

การแก้ไขปัญหา

ปัญหาทั่วไปและแนวทางแก้ไข

• อุปกรณ์ไม่เปิด: Ensure the device is fully charged. Connect it to the USB-C charging cable and a power source for at least 2 hours.
• Poor or no vacuum seal:
  • Check that the jar rim and lid are completely clean and dry.
  • Verify that the silicone sealing ring inside the sealer is correctly positioned and not dislodged. Refer to the Maintenance section for guidance.
  • Ensure the sealer is firmly pressed down and centered on the jar lid during operation.
  • Inspect the Mason jar lid for any defects or damage that might prevent a proper seal.
• Device stops prematurely: นี่อาจแสดงว่าแบตเตอรี่เหลือน้อย โปรดชาร์จอุปกรณ์

ข้อมูลจำเพาะ

การรับประกันและการสนับสนุน

For specific warranty information and support, please refer to the documentation included with your product or contact UNERVER customer service directly. You can also visit the official UNERVER store on Amazon for more information and contact options:

Visit the UNERVER Store