BSEED N020-120-1P

BSEED N020-120V-30A Surge Protector User Manual

Model: N020-120-1P

1. บทนำ

The BSEED N020-120V-30A Surge Protector is a heavy-duty voltage regulator designed to protect your valuable home appliances from electrical fluctuations. It safeguards against high and low voltage, brownouts, spikes, instant surges, power failures, and load shedding. This device is suitable for a wide range of appliances, including refrigerators, air conditioners, TVs, computers, and other household electronics operating at 120V and up to 30A (3600W).

2. คำแนะนำด้านความปลอดภัย

Please read and understand all safety instructions before installing or operating this surge protector. Failure to follow these instructions may result in electric shock, fire, or damage to the product or connected appliances.

  • อันตรายจากไฟฟ้า: Ensure the power supply is disconnected before installation or making any adjustments.
  • การเดินสายไฟที่ถูกต้อง: Always ensure the correct polarity of the cables (phase, neutral, grounding) during connection. Refer to the connection diagram for proper wiring.
  • ความจุที่กำหนด: Do not exceed the maximum current capacity of 30 Amps or 3600 Watts. Overloading can cause damage and fire hazards.
  • สำหรับใช้ภายในอาคารเท่านั้น: This device is intended for indoor use in dry locations. Do not expose to water or excessive humidity.
  • การเชื่อมต่อที่ปลอดภัย: Ensure all wire connections are tight and secure to prevent arcing or overheating.
  • การติดตั้งโดยมืออาชีพ: หากคุณไม่แน่ใจเกี่ยวกับกระบวนการติดตั้ง โปรดปรึกษาช่างไฟฟ้าที่มีคุณสมบัติเหมาะสม
Connection Diagram for BSEED N020-120V-30A Surge Protector
รูปที่ 2.1: Connection Diagram. This diagram illustrates the proper wiring for the surge protector, showing connections for electric supply, short circuit protector, and the equipment to be protected. Pay close attention to phase, neutral, and grounding connections for safety.

3. สินค้าหมดview และคุณสมบัติ

3.1 Key Components and Indicators

Basic Characteristics of BSEED N020-120V-30A Surge Protector
รูปที่ 3.1: Basic Characteristics. This image highlights the indicator lights on the surge protector: 1. Normal Voltage (Green), 2. Over Voltage (Orange), and 3. Low Voltage (Red). It also shows the adjustable voltage settings and reconnection delay.
  • Indicator of NORMAL voltage (Green): สว่างขึ้นเมื่อระดับเสียงtage อยู่ในช่วงการทำงานที่ปลอดภัย
  • Indicator of OVER voltage (Orange): ไฟจะสว่างขึ้นเมื่อป้อนค่าระดับเสียงtage exceeds the set maximum threshold.
  • Indicator of LOW voltage (Red): ไฟจะสว่างขึ้นเมื่อป้อนค่าระดับเสียงtage drops below the set minimum threshold.
  • ปรับระดับเสียงได้tage การตั้งค่า: Dials for setting minimum (Under Voltage Cut-off) and maximum (Over Voltage Cut-off) voltagเกณฑ์อี
  • Adjustable Reconnection Delay: Dial for setting the waiting time before power is reconnected after a voltagอีเหตุการณ์

คุณสมบัติขั้นสูง 3.2 ประการ

Other Novel Features of BSEED N020-120V-30A Surge Protector
รูปที่ 3.2: Other Novel Features. This diagram illustrates the internal components and features, including adjustable voltage and delay settings, manual ON/OFF switch, assembly facilities, safer connectors with protective covers, convenient access for gutters, and a protective cover with safety seal holes.
  1. Adjustable LOW voltagอนุญาต: เลือกได้ระหว่าง 90V ถึง 115V
  2. Adjustable OVER voltagอนุญาต: เลือกได้ระหว่าง 125V ถึง 145V
  3. Adjustable waiting cycle: Between 180-300 seconds (3 to 5 minutes).
  4. Manual ON and OFF switch: For convenient control.
  5. Assembly facilities: Two (2) options for mounting on a 2"x4" box or a flat surface.
  6. Safer connectors: ขั้วต่ออินพุตและเอาต์พุตได้รับการป้องกันด้วยฝาปิด
  7. Convenient access for gutters: Through predictable sections.
  8. Protective cover with safety seal holes: To prevent unauthorized manipulation of adjustments and connections.

3.3 ขนาดสินค้า

Dimensions of BSEED N020-120V-30A Surge Protector
รูปที่ 3.3: Product Dimensions. The surge protector measures approximately 3.50 inches in height, 4.60 inches in width, and 1.45 inches in depth.

4. การติดตั้ง

4.1 แผนผังการเดินสายไฟ

อ้างถึง Figure 2.1 (Connection Diagram) in the Safety Instructions section for detailed wiring instructions. Ensure all connections are made correctly, matching phase (L), neutral (N), and grounding (G) wires from your electric supply to the protector's input terminals, and then from the protector's output terminals to your appliance.

4.2 การติดตั้ง

The surge protector can be mounted in two ways:

  • On a 2"x4" electrical box: Use the designated assembly facilities on the device.
  • บนพื้นผิวเรียบ: Secure the device using appropriate screws through the provided mounting holes.

4.3 การตั้งค่าและการปรับแต่งเบื้องต้น

Before connecting your appliance, you can adjust the voltage cut-off points and the delay time:

  • ภายใต้ฉบับtage จุดตัด: Use the 'MINIMUM V-' dial to set the lowest acceptable voltagระหว่าง 90V และ 115V
  • มากกว่าVoltage จุดตัด: Use the 'MAXIMUM V+' dial to set the highest acceptable voltagระหว่าง 125V และ 145V
  • Reconnection Delay: Use the 'RECONNECTION S' dial to set the waiting period (3 to 5 minutes) before power is restored after a voltagอีเหตุการณ์

It is recommended to set these values according to the specifications of the appliance you intend to protect and your local power grid stability.

5. การดำเนินการ

5.1 การเปิดเครื่อง

After proper installation and adjustment:

  1. Ensure the manual ON/OFF switch is in the 'ON' position.
  2. Apply power to the surge protector.
  3. The device will initiate a delay cycle (3 to 5 minutes, as set). During this time, the indicator lights may show a waiting state.
  4. Once the delay period is complete and the voltage is stable within the set parameters, the green 'NORMAL' indicator light will turn on, and power will be supplied to your connected appliance.

ไฟแสดงสถานะ 5.2 ดวง

  • Green Light (NORMAL): บ่งชี้ว่า voltage is stable and within the safe operating range, and power is being supplied to the appliance.
  • Orange Light (OVER VOLTAGจ): Indicates that the input voltage is too high. The protector has cut off power to safeguard the appliance. Power will be restored after the voltage normalizes and the delay cycle completes.
  • Red Light (LOW VOLTAGจ): Indicates that the input voltage is too low. The protector has cut off power to safeguard the appliance. Power will be restored after the voltage normalizes and the delay cycle completes.

5.3 การใช้งานทั่วไป

BSEED N020-120V-30A Surge Protector in various applications
รูปที่ 5.1: Typical Applications. The BSEED N020-120V-30A Surge Protector is suitable for protecting a variety of heavy-duty home appliances, including air conditioners, washing machines, rice cookers, and microwave ovens.

6. การบำรุงรักษา

The BSEED N020-120V-30A Surge Protector requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

  • การทำความสะอาด: Periodically wipe the exterior of the device with a soft, dry cloth. Do not use liquid cleaners or solvents.
  • ตรวจสอบการเชื่อมต่อ: ตรวจสอบการเชื่อมต่อสายไฟทั้งหมดเป็นประจำทุกปี เพื่อให้แน่ใจว่ายังคงแน่นหนาและปราศจากสนิม
  • สภาพแวดล้อม : Ensure the device is kept in a dry, well-ventilated area, away from direct sunlight, heat sources, and corrosive environments.
  • ฝาครอบป้องกัน: Keep the protective cover securely closed to prevent dust and unauthorized access to internal components.

7 การแก้ไขปัญหา

หากคุณพบปัญหาเกี่ยวกับอุปกรณ์ป้องกันไฟกระชาก โปรดดูปัญหาและวิธีแก้ไขที่พบบ่อยต่อไปนี้:

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
Appliance does not power on after connecting.1. Surge protector is in delay cycle.
2. อินพุต voltage is outside safe range.
3. Manual switch is OFF.
4. การเชื่อมต่อสายไฟหลวม
1. Wait for the set delay time (3-5 minutes).
2. Check indicator lights (Orange for Over, Red for Low). Wait for voltage เพื่อทำให้เป็นปกติ
3. Ensure the manual ON/OFF switch is in the 'ON' position.
4. Disconnect power and check all wiring connections for tightness.
Orange (Over Voltage) or Red (Low Voltage) light remains on.Persistent unstable voltage จากแหล่งจ่ายไฟThe protector is functioning as intended by cutting off power. If the issue persists, contact your electricity provider or a qualified electrician to check your home's electrical system.
Device appears to be non-functional.Internal fault or severe damage.Disconnect from power immediately. Do not attempt to repair. Contact BSEED customer support for assistance.

8. ข้อมูลจำเพาะทางเทคนิค

ข้อมูลจำเพาะค่า
ยี่ห้อเมล็ดพันธุ์บีเอส
หมายเลขรุ่นN020-120-1P
เล่มที่tageกระแสสลับ 120 โวลต์
กระแสไฟสูงสุด30 Amps
พลังสูงสุด3600 วัตต์
ภายใต้ฉบับtage Cut-off RangeAdjustable 90V - 115V
มากกว่าVoltage Cut-off RangeAdjustable 125V - 145V
Reconnection Delay TimeAdjustable 3 - 5 minutes (180-300 seconds)
จำนวนจุดจำหน่าย1
ประเภทปลั๊กแบบ B - 3 ขา (แบบอเมริกาเหนือ)
อุปกรณ์ที่รองรับAir Conditioner, Computer, House Electric Appliances, Refrigerator, Television
วัสดุของตู้หุ้มAluminum, Copper, Polycarbonate, Rubber
คุณสมบัติพิเศษปรับระดับเสียงได้tage, Surge Protection, Manual ON/OFF Switch

9. การติดต่อและการสนับสนุน

For further assistance, technical support, or warranty inquiries, please contact BSEED customer service through the retailer where the product was purchased or visit the official BSEED webเว็บไซต์.

ผู้ผลิต: เมล็ดพันธุ์บีเอส

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.