1. สูงกว่าview
This manual provides detailed instructions for the installation, operation, and maintenance of the Topyond Electric Bike Controller Kit. This kit is designed for modifying or replacing components on 36V/48V 1000W electric bicycles, electric scooters, and similar vehicles, enhancing your riding experience with advanced control and display features.
The kit includes a 30A sine wave controller, a KT-LCD8H panel, a 10B power sensor, and a 20X full throttle grip. These components can be used individually or as a complete system.
Figure 1: Complete Topyond Electric Bike Controller Kit Components
2. ข้อมูลด้านความปลอดภัย
คำเตือน:
- ควรตัดการเชื่อมต่อไฟฟ้าทุกครั้งก่อนดำเนินการติดตั้ง บำรุงรักษา หรือแก้ไขปัญหาใดๆ
- Improper installation or use can lead to electric shock, fire, or serious injury.
- Professional installation by a qualified technician is highly recommended.
- ตรวจสอบให้แน่ใจว่าการเชื่อมต่อทั้งหมดมีความปลอดภัยและมีฉนวนเพื่อป้องกันไฟฟ้าลัดวงจร
- Do not expose the controller or display to water or extreme weather conditions.
- ตรวจสอบปริมาณแบตเตอรี่tage compatibility with the controller (36V/48V).
3. เนื้อหาบรรจุภัณฑ์
The Topyond Electric Bike Controller Kit includes the following items:
- 1x 30A Sine Wave Controller
- 1x KT-LCD8H Display Panel
- 1x 10B Power Magnetic Point (PAS Sensor)
- 1x 20X Full Throttle Grip
Figure 2: Kit components and examples of compatible electric bikes.
4. การตั้งค่าและการติดตั้ง
4.1 Controller Wiring Overview
The controller features multiple color-coded wires for various connections. Ensure each connection is made correctly according to the corresponding component.
Figure 3: Topyond Controller with labeled wiring for different functions.
การเชื่อมต่อที่สำคัญ:
- พลังงานแบตเตอรี่: Red (positive) and Black (negative) lines.
- Motor Phase Lines: Blue, Green, Yellow wires for motor connection.
- ฮอลล์เซนเซอร์: Multi-pin connector for motor's Hall sensor.
- แสดง: Connector for the KT-LCD8H panel.
- คันเร่ง: Connector for the 20X Full Throttle Grip.
- เบรกมือ: Connectors for electronic brake levers.
- แสงสว่าง: Connectors for headlights/taillights.
- PAS (Power Assist Sensor): Connector for the 10B Power Magnetic Point.
4.2 Component Specifics and Connections
4.2.1 ตัวควบคุม
The sine wave controller provides stable and safe operation. Its grooved design aids in heat dissipation, protecting internal circuits.
Figure 4: Controller with detailed specifications.
Ensure the red and black power lines from the controller are connected to the corresponding positive and negative terminals of your battery. The blue, green, and yellow phase lines should connect to the motor's phase lines, matching colors.
4.2.2 KT-LCD8H Display Panel
The display panel provides essential riding information. It is suitable for 22.2mm diameter handlebars.
Figure 5: KT-LCD8H Display Panel with interface details.
Connect the display's 5-pin interface cable to the corresponding port on the controller. Mount the display securely on your handlebar.
4.2.3 10B Power Magnetic Point (PAS Sensor)
This sensor assists with pedaling. It is typically installed on the left side of the crank.
Figure 6: 10B Power Magnetic Point (PAS Sensor) with specifications.
Connect the 3-pin SM connector of the PAS sensor to the controller. Ensure it is installed in the correct position for accurate pedal assistance.
4.2.4 20X Full Throttle Grip
The throttle grip provides direct motor control. It is compatible with 22.2mm handlebars.
Figure 7: 20X Full Throttle Grip with specifications.
Connect the 3-pin SM connector of the throttle grip to the controller. Pay attention to the red and black lines in the throttle connection, ensuring they are connected correspondingly.
4.3 Wiring and Display Setup Demonstration Video
Video 1: Detailed unboxing, component overview, wiring connections, and display parameter settings for the e-bike controller kit. This video demonstrates the connection process for the controller, display, and throttle, including parameter adjustments.
5. Operating Instructions (KT-LCD8H Panel)
The KT-LCD8H display provides various functions for controlling and monitoring your e-bike.
- เปิด/ปิดเครื่อง: Long press the power button to turn the display on or off.
- การปรับระดับ PAS: Use the '+' and '-' buttons to adjust the pedal assist levels.
- Accessing Parameter Settings: Long press the power button and '+' button simultaneously to enter the parameter setting mode.
5.1 Key Parameter Settings (P01-P20)
In parameter setting mode, use the power button to cycle through parameters (P01-P20) and the '+' / '-' buttons to adjust values. Long press the power button to exit.
- P01: ความสว่างของแสงไฟแบ็คไลท์ (1-3, 3 is brightest)
- P02: Change Metric (0: km, 1: mile)
- P03: ปริมาณแบตเตอรี่tage การตั้งค่า (Default 36V, adjustable for 36V-60V systems)
- P04: Hibernate Mode Time (1-60 minutes, 0 for no hibernate)
- P05: Total Assist Levels (0-5, 0 for no assist)
- P06: Wheel Size (inch) (Set according to your wheel size)
- P07: Speed Calculation (Number of magnets for speed calculation, range 1-255)
- P08: Speed Limit Range (0-100km/h)
- P09: Zero Speed Start (0: zero start, 1: non-zero start)
- P10: Driving Mode Selection (0: only assist, 1: only electric, 2: both)
- P11: Assist Sensitivity (Range 1-24, sets delay between pedaling and motor start)
- P12: Assist Starting Power (Range 1-5, sets the starting power of the motor)
- P13: Assist Disc Type (5, 8, 12 magnets)
- P14: Current Limit of Controller (Range 3-20A, 12A by default)
- P15: ระดับเสียงต่ำtage Protection Setting of Controller
- P16: ODO Distance Reset (Hold '+' for 5 seconds to reset)
- P17: Cruise Mode Selection (0: cruise mode disabled, 1: cruise mode enabled)
- P18: Speed Ratio
- P19: Assist Level (0: disable, 1: level 0, 2: level 1, etc.)
- P20: Protocol Selection (0: NO 2 Protocol, 1: S5 Protocol)
Video 2: A brief demonstration of the electric bike controller kit in use, showcasing its functionality on a road.
6. การบำรุงรักษา
Regular maintenance ensures the longevity and optimal performance of your e-bike controller kit.
- ความสะอาด : Keep the controller, display, and all connections clean and free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning.
- การตรวจสอบการเชื่อมต่อ: Periodically inspect all electrical connections for tightness and signs of wear or corrosion. Re-secure any loose connections.
- ความสมบูรณ์ของสายเคเบิล: Check all cables for cuts, fraying, or damage. Replace damaged cables immediately to prevent short circuits or system failure.
- การสัมผัสน้ำ: Avoid riding in heavy rain or submerging the components in water. While the components are designed for outdoor use, excessive water exposure can cause damage.
- การจัดการความร้อน: Ensure the controller has adequate airflow for cooling. Do not cover it with insulating materials during operation.
7 การแก้ไขปัญหา
The KT-LCD8H display can show error codes to help diagnose issues. Refer to the display manual for a complete list and descriptions of error codes (E00-E12).
| รหัส (ทศนิยม) | คำอธิบาย |
|---|---|
| E00 | ปกติ |
| E01 | ที่สงวนไว้ |
| E02 | เบรคผิดพลาด |
| E03 | Assist Sensor Error |
| E04 | 6KM/H Push Mode |
| E05 | โหมดล่องเรือ |
| E06 | แบตเตอรี่ต่ำ Voltagการป้องกันอี |
| E07 | มอเตอร์ผิดพลาด |
| E08 | คันเร่งผิดพลาด |
| E09 | ข้อผิดพลาดของคอนโทรลเลอร์ |
| E10 | COM Receive Error |
| E11 | COM Send Error |
| E12 | ข้อผิดพลาดในการสื่อสาร BMS |
| E13 | Head Light Error |
ขั้นตอนการแก้ไขปัญหาทั่วไป:
- ไม่มีไฟฟ้า: Check battery connection and charge level. Ensure the display is properly connected and powered on.
- มอเตอร์ไม่ตอบสนอง: Verify all motor phase and Hall sensor connections. Check for error codes related to the motor or controller.
- Inconsistent Assist: Check PAS sensor installation and connection. Adjust PAS sensitivity (P11) if needed.
- Throttle Issues: Inspect throttle wiring for damage. Check for throttle error codes.
8. ข้อมูลจำเพาะ
พารามิเตอร์ของตัวควบคุม:
- วัสดุ: โลหะผสมอลูมิเนียม
- กระแสไฟสูงสุด: 30±2เอ
- กระแสไฟที่กำหนด: 15เอ
- เล่มที่tage: กระแสตรง 36V 48V
- Brake Input: ระดับต่ำ
- ปริมาณต่ำtagการป้องกันอี: DC30/40±0.5V
- Applicable Motor: 1000วัตต์
Panel Parameters (KT-LCD8H):
- วัสดุ: PC
- แบบอย่าง: For KT LCD8H
- เหมาะสำหรับ: 22.2mm Diameter Handlebar Installation
- เล่มที่tage: 24V 36V 48V
- อินเทอร์เฟซ: 5 พิน
- ฟังก์ชั่น: Riding Time, Riding Speed, Riding Mileage, Power Gear, Power Indication, Fault Code Prompts, Headlight Display, Motor Running Status, 6km/H Power Promotion.
Assisted Magnetic Point Parameters (10B Power Sensor):
- วัสดุ: พลาสติก, แม่เหล็ก
- เล่มที่tage: กระแสตรง 36V 48V
- ความยาวสาย: 100ซม. / 39.4นิ้ว
- ตัวเชื่อมต่อ: 3 Pin SM Connector
- ตำแหน่งการติดตั้ง : ด้านซ้าย
20X Full Throttle Grip Parameters:
- วัสดุ: ยาง
- เล่มที่tage: DC 24V 36V 48V 60V 72V
- ความยาวสาย: 180ซม. / 70.9นิ้ว
- ตัวเชื่อมต่อ: 3 Pin SM Connector
ข้อมูลผลิตภัณฑ์ทั่วไป:
- น้ำหนักสินค้า: 1.2 กิโลกรัม
- ASIN: B0CKRF24GC
- หมายเลขรุ่น: Topyonddghfyi0s1x
- วันที่เข้าใช้งานครั้งแรก: 9 ตุลาคม 2023
9. การรับประกันและการสนับสนุน
For warranty information and customer support, please refer to the documentation provided with your purchase or contact the seller directly. You can also visit the official Topyond store for more product information and assistance: