Cyrank Keyless Entry Access Control Keypad User Manual

สินค้าเกินview

The Cyrank Keyless Entry Access Control Keypad is a robust and versatile security device designed for secure door access. It features a touch-sensitive keypad with backlight buttons and is constructed from ABS flame retardant material, ensuring durability and safety. The keypad supports multiple unlocking methods, including RFID card, password, and a combination of card and password, offering flexible access control for various environments.

This device is equipped with a waterproof cover, making it suitable for outdoor installation. It boasts a large memory capacity, capable of storing up to 2,000 3-6 digit user passwords. The system also includes a Wiegand 26 Input/Output communication interface and offers a card reading distance of 1-10cm (3.9 inches).

การติดตั้งและการตั้งค่า

Before installation, ensure all components are present: the keypad unit, waterproof cover, and any included RFID cards. The keypad is designed for surface mounting.

การติดตั้งทางกายภาพ

1. การติดตั้งแป้นพิมพ์: Choose a suitable location for the keypad, ensuring it is within reach of the door and power source. Secure the keypad to the wall using appropriate screws.
2. Attaching the Waterproof Cover: If installing outdoors, place the waterproof cover over the keypad to protect it from environmental elements.

Wiring and Initial Power-On

Connect the keypad to your access control system and power supply according to the wiring diagram provided in the product packaging. Ensure all connections are secure before applying power.

Upon initial power-on, the device will be in its default state. You will need to add a management card to begin configuring user access.

Adding a Management Card

The management card is essential for adding or deleting user cards. Follow these steps to add a management card:

1. Swipe the designated management card once over the keypad.
2. Swipe the user card you wish to add.
3. Swipe the management card again to exit the programming mode.

คำแนะนำการใช้งาน

The Cyrank Keyless Entry Access Control Keypad offers three primary methods for unlocking:

• บัตร RFID: Present a registered RFID card to the keypad's reading area. The device will emit a confirmation sound and unlock.
• รหัสผ่าน: Enter your 3-6 digit password on the touch keypad. The device will confirm and unlock.
• Card + Password: Present a registered RFID card, then immediately enter your password on the keypad. This method provides an additional layer of security.

The keypad features backlight buttons for easy visibility in low-light conditions. The card reading distance is approximately 1-10 cm (0.4-3.9 inches).

การซ่อมบำรุง

The Cyrank Keyless Entry Access Control Keypad is designed for low maintenance. Its ABS flame retardant material and waterproof cover contribute to its longevity and resistance to environmental factors.

• การทำความสะอาด: Wipe the keypad surface and waterproof cover with a soft, damp ใช้ผ้าเช็ดทำความสะอาด หลีกเลี่ยงการใช้สารทำความสะอาดที่มีฤทธิ์กัดกร่อนหรือตัวทำละลายที่อาจทำให้พื้นผิวหรือชิ้นส่วนอิเล็กทรอนิกส์เสียหายได้
• การตรวจสอบ: Periodically check the wiring connections for any signs of wear or damage. Ensure the waterproof cover is securely in place if installed outdoors.
• การจัดการบัตร: รีเป็นประจำview and update user cards and passwords as needed to maintain security.

การแก้ไขปัญหา

Deleting a User Card

If a user card is lost or no longer needed, it can be deleted from the system:

1. Place the management card on the access control card swiping area for approximately 5 seconds. The power indicator will flash quickly.
2. Swipe the user card you wish to delete.
3. Swipe the management card again to exit the programming mode.

Refer to the embedded video in the "Setup and Installation" section for a visual guide on adding and deleting user cards.

การคืนค่าเป็นการตั้งค่าจากโรงงาน

To restore the keypad to its factory default settings, which will erase all programmed user cards and passwords:

1. หมดแรง: Disconnect the power supply to the keypad.
2. Short Connect Wires: Briefly connect the black line (GND) and the brown line (OPEN) wires together.
3. เปิดเครื่อง: While the black and brown wires are short-connected, reapply power to the keypad. The green light should flash three times.
4. การตัดสายไฟ: Disconnect the black and brown wires. The device should now be restored to factory settings and operate normally.
5. Add New Management Card: After factory reset, you will need to add a new management card as described in the "Setup and Installation" section.

The embedded video in the "Setup and Installation" section also demonstrates the factory reset procedure.

ปัญหาทั่วไป

• แป้นพิมพ์ไม่ตอบสนอง: Check power connections. Ensure the keypad is receiving adequate power.
• Card not reading: Ensure the card is correctly presented within the reading distance (1-10cm). Verify the card is registered in the system.
• Incorrect password entry: Ensure the correct 3-6 digit password is being entered.

ข้อมูลจำเพาะ

การรับประกันและการสนับสนุน

Specific warranty information for the Cyrank Keyless Entry Access Control Keypad (Model: Cyrankvfbpq4yns8) is typically provided with the product packaging or available through the retailer at the time of purchase. Please refer to these resources for details regarding warranty coverage, duration, and terms.

For technical support, troubleshooting assistance beyond this manual, or inquiries about replacement parts, please contact Cyrank customer service or your product retailer. Contact information can usually be found on the product packaging or the manufacturer's official webเว็บไซต์.