การแนะนำ
This manual provides essential information for the safe and effective use of your Hyuduo JGY370 DC 6V Geared Motor. This motor is designed for various applications including electronic science kits, robotics projects, and DIY educational kits. It features PWM speed control technology, a turbine reduction design for high torque, and durable metal gears with a stainless iron hardened output shaft.
เนื้อหาแพ็คเกจ
โปรดตรวจสอบให้แน่ใจว่าส่วนประกอบทั้งหมดที่ระบุไว้ด้านล่างนี้รวมอยู่ในแพ็คเกจของคุณแล้ว:
- 1 x JGY370 Geared Motor
- 1 x CCM2 DC Motor Governor
- 1 x CW and CCW Switch
- 1 x Knob for Potentiometer
- 1 x เครื่องซักผ้า
- 1 x วงเล็บยึด
- สกรูยึด 4 ตัว
The image above displays all the items you should find in your product package. Ensure all parts are present and undamaged before proceeding with installation.
คำแนะนำการตั้งค่า
Follow these steps to set up your JGY370 Geared Motor:
- การติดตั้งมอเตอร์: Use the provided mounting bracket and screws to secure the geared motor to your desired application surface. Ensure the motor is firmly attached to prevent vibration and movement during operation.
- Connecting the Governor: The CCM2 DC Motor Governor controls the motor's speed. Connect the motor to the output terminals of the governor. The governor's input terminals should be connected to a DC power source within the 10V-30V range. The motor itself operates within a DC 3-9V range.
- Installing the Potentiometer and Switch: The potentiometer (with knob and washer) is used for speed regulation. The CW and CCW switch is used to control forward, reverse, and stop functions. Connect these to the designated ports on the governor as per the wiring diagram (not provided, refer to governor's specific instructions if available).
- การเชื่อมต่อไฟฟ้า: Connect your DC power supply (within 10V-30V for the governor) to the input terminals of the CCM2 governor. Ensure correct polarity.
ภาพนี้แสดงให้เห็นชัดเจน view of the geared motor unit, highlighting its robust construction and output shaft, which is crucial for mechanical integration into your projects.
คำแนะนำการใช้งาน
Once the motor and governor are correctly installed and powered, you can begin operation:
- เปิดเครื่อง: Apply power to the CCM2 DC Motor Governor.
- การควบคุมทิศทาง: Use the CW and CCW switch to select the desired rotation direction (Clockwise, Counter-Clockwise) or to stop the motor.
- การปรับความเร็ว: Rotate the potentiometer knob to adjust the motor's speed. The PWM speed control technology allows for a wide range of speed adjustments from 5% to 95% of the maximum speed.
This image illustrates a potential use case for the motor, demonstrating its compact size and suitability for integration into household appliances or similar projects.
การซ่อมบำรุง
Proper maintenance ensures the longevity and optimal performance of your motor:
- Avoid Restrictions: Ensure there are no obstructions or adhesive materials entering the bearing through the rotating shaft, as this can impede motor function and reduce lifespan.
- ป้องกันการโอเวอร์โหลด: Do not overload the motor or attach objects that hinder rotation at the shaft end. Overloading can significantly shorten the motor's service life.
- Minimize Eccentric Loads: Avoid manufacturing or operating the motor under eccentric heavy radiation loads, as this can be detrimental to the motor's lifespan.
- รักษาความสะอาด: Periodically clean the motor and governor to prevent dust and debris buildup, which can affect performance and heat dissipation.
การแก้ไขปัญหา
If you encounter issues with your JGY370 Geared Motor, consider the following:
- มอเตอร์ไม่ทำงาน:
- Check all power connections to the governor and motor for secure contact and correct polarity.
- ตรวจสอบว่าแหล่งจ่ายไฟมีแรงดันไฟtage is within the specified range for the governor (DC 10V-30V).
- Ensure the CW/CCW switch is not in the 'Stop' position.
- Inspect for any physical obstructions preventing the motor shaft from rotating.
- ความเร็วไม่สอดคล้องกัน:
- Check the potentiometer connection to the governor.
- Ensure the load on the motor is consistent and not exceeding its rated torsion.
- มอเตอร์ร้อนจัด:
- ลดภาระของมอเตอร์
- Ensure adequate ventilation around the motor and governor for heat dissipation.
- Verify the motor is not operating continuously at its maximum load capacity for extended periods.
If problems persist, consult the specifications and ensure all components are used within their rated limits.
ข้อมูลจำเพาะ
JGY370 Geared Motor
| เล่มที่tagอี (วี) | Rotating Speed (RPM) | Rated Torsion (Kg.cm) | กระแสไฟฟ้าที่กำหนด (A) | Maximum Torsion (Kg.cm) | Stall Current (A) |
|---|---|---|---|---|---|
| 6 | 150 | 0.2 | <0.6 | 0.9 | 3.3 |
| 6 | 100 | 0.5 | <0.6 | 1.6 | 3.3 |
| 6 | 50 | 0.7 | <0.6 | 2 | 3.3 |
| 6 | 40 | 2 | <0.6 | 7.5 | 3.3 |
| 6 | 30 | 5.3 | <0.6 | 10 | 3.3 |
| 6 | 25 | 6.7 | <0.6 | 13 | 3.3 |
| 6 | 20 | 9 | <0.6 | 18 | 3.3 |
| 6 | 10 | 15.9 | <0.6 | 30 | 3.3 |
| 6 | 5 | 26.5 | <0.6 | 45 | 3.3 |
CCM2 DC Motor Governor
- ฉบับทำงานtage: กระแสตรง 10V-30V
- กำลังควบคุม: 12V x 3A = 36W, 24V x 3A = 72W, <24V, maximum 120W
- กระแสไฟที่กำหนด: 3A
- กระแสไฟสูงสุด: 5A
- PWM Pulse Width Adjustment Range: 5%-95%
- โพเทนชิออมิเตอร์: Value B10K, wire length approx. 20cm / 7.9in, opening approx. 8mm / 0.3in
- ปริมาณการส่งออกtage: Approximately equal to the input voltage
- Speed Governor Size: ขนาดโดยประมาณ 74 x 47 x 28 มม. / 2.9 x 1.9 x 1.1 นิ้ว
การรับประกันและการสนับสนุน
For warranty information, technical support, or any inquiries regarding your Hyuduo JGY370 DC 6V Geared Motor, please refer to the contact information provided with your purchase or visit the official Hyuduo webไซต์นี้ โปรดเก็บใบเสร็จรับเงินที่ซื้อไว้เพื่อใช้เรียกร้องการรับประกัน