การแนะนำ
This manual provides essential instructions for the safe and effective operation of your ESKY 150 EC Micro RC Helicopter. The 150 EC is a third-generation micro remote-controlled helicopter designed for ease of operation. It features a 6-axis gyroscope for stable flight, atmospheric pressure and altitude hold capabilities, hovering, and a controllable flight path. It also includes a one-button shutdown function for emergency situations.
มีอะไรอยู่ในกล่อง
Carefully unpack all components and ensure all items listed below are present. If any items are missing or damaged, please contact customer support.
- เฮลิคอปเตอร์ ESKY 1 EC จำนวน 150 ลำ
- 1 x MINI 6X 6-Channel 2.4GHz Transmitter (Remote Control)
- 1 x 1S 3.7V 150mAh 20C Li-Po Battery (for helicopter)
- 2 x Main Blades (spare)
- 1 x Tail Blade (spare)
- เครื่องชาร์จ USB 1 ชิ้น
- 2 x Screw Drivers
- 1 x คู่มือผู้ใช้ (เอกสารนี้)

Image: All components included in the ESKY 150 EC package.
สินค้าเกินview
ชิ้นส่วนเฮลิคอปเตอร์

ภาพ: ด้านข้าง view of the ESKY 150 EC helicopter.
The ESKY 150 EC helicopter features a durable frame, main rotor blades, a tail rotor, landing skids, and a removable canopy. The main rotor provides lift and control, while the tail rotor controls yaw (left/right rotation).
รีโมทคอนโทรล (เครื่องส่งสัญญาณ)
The MINI 6X 6-Channel 2.4GHz transmitter is used to control the helicopter. Familiarize yourself with its various controls:

Image: Labeled diagram of the MINI 6X Remote Control.
- สวิตช์โหมด: Changes flight modes (e.g., beginner/advanced).
- ไฟ LED แสดงสถานะ: แสดงสถานะพลังงาน
- สวิตช์ตัดปีกผีเสื้อ: Immediately cuts power to the motor.
- Rudder (Left/Right): Controls the helicopter's yaw.
- คันเร่ง (ขึ้น/ลง): ควบคุมความเร็วและความสูงของใบพัดหลัก
- Aileron (Left/Right): Controls the helicopter's roll (side-to-side movement).
- Elevator (Up/Down): Controls the helicopter's pitch (forward/backward movement).
- Trim Controls (Throttle, Rudder, Aileron, Elevator): Fine-tune controls to correct unwanted drift.
- สวิตช์ไฟ: Turns the remote control ON/OFF (hold down for ON/OFF).
การตั้งค่า
1. การชาร์จแบตเตอรี่เฮลิคอปเตอร์
The helicopter uses a 1S 3.7V 150mAh Li-Po battery. Always use the provided USB charger.
- Connect the USB charger to a USB power source (e.g., computer USB port, USB wall adapter).
- Connect the helicopter battery to the USB charger. Ensure the polarity is correct.
- The indicator light on the charger will show the charging status (refer to charger instructions for specific light patterns).
- เมื่อการชาร์จเสร็จสมบูรณ์แล้ว ให้ถอดแบตเตอรี่ออกจากเครื่องชาร์จ อย่าชาร์จไฟเกิน

Image: Connecting the Li-Po battery to the USB charger.
2. Installing the Helicopter Battery
Ensure the helicopter is powered off before installing the battery.
- Gently remove the helicopter's canopy to access the battery compartment.
- Insert the charged Li-Po battery into the compartment.
- Connect the battery plug to the helicopter's power port.
- Carefully reattach the canopy.

Image: Helicopter with canopy removed, revealing the battery compartment.

Image: Battery inserted into the helicopter.
3 การเปิดเครื่องและการเชื่อมต่อ
The helicopter and remote control must be bound (paired) before flight.
- วางเฮลิคอปเตอร์บนพื้นผิวที่เรียบและระดับเท่ากัน
- Ensure the remote control's throttle stick is in the lowest position.
- เปิดสวิตช์ไฟของเฮลิคอปเตอร์ ไฟแสดงสถานะของเฮลิคอปเตอร์จะกะพริบ
- Press and hold the Power Switch on the remote control until it turns on. The remote control's indicator light will flash.
- Wait for a few seconds. The indicator lights on both the helicopter and remote control should become solid, indicating a successful binding.
- If binding fails, turn off both devices and repeat the process.
คำแนะนำการใช้งาน
Always operate the helicopter in an open, safe area, away from people, animals, and obstacles. Ensure you have sufficient space for flight.
การควบคุมการบินขั้นพื้นฐาน
- คันเร่ง (ก้านควบคุมด้านซ้ายขึ้น/ลง): Increases or decreases the main rotor speed, controlling ascent and descent.
- Rudder (Left Stick Left/Right): Controls the helicopter's rotation around its vertical axis (yaw).
- Elevator (Right Stick Up/Down): ควบคุมการเคลื่อนที่ไปข้างหน้าและถอยหลัง (การเอียง)
- Aileron (Right Stick Left/Right): ควบคุมการเคลื่อนที่ไปด้านข้าง (การหมุน)
การบินขึ้นและลงจอด
- ถอดออก: Slowly push the throttle stick up. The helicopter will gain altitude. Maintain a steady throttle to achieve a stable hover.
- การลงจอด: Slowly pull the throttle stick down. The helicopter will descend. Reduce throttle completely upon landing.
Altitude Hold and Hover
The 150 EC is equipped with a 6-axis gyroscope and atmospheric pressure sensor for stable flight and altitude hold. Once the helicopter reaches a desired altitude, release the throttle stick to its center position. The helicopter will attempt to maintain its current height.
Flight Modes (Hi/Lo)
The remote control features a Mode Switch. It is recommended to use the "Hi" mode for more stable and responsive flight. The "Lo" mode may exhibit a slight delay in controller response.
One-Button Shutdown
In an emergency or if the helicopter is out of control, use the Throttle Cut Switch to immediately stop the motors. This function can also be used for a quick, controlled shutdown after landing.
การซ่อมบำรุง
การทำความสะอาด
Wipe the helicopter and remote control with a soft, dry cloth after each use. Avoid using water or chemical cleaners, as they can damage electronic components.
การเปลี่ยนใบมีด
If main or tail blades become damaged, replace them with the provided spares using the included screwdriver. Ensure blades are securely fastened but not overtightened.

ภาพ: รายละเอียด views of helicopter components, including rotor attachment points.
การดูแลแบตเตอรี่
- ใช้ที่ชาร์จเดิมเสมอ
- อย่าชาร์จมากเกินไปหรือคายประจุแบตเตอรี่มากเกินไป
- เก็บแบตเตอรี่ไว้ในที่แห้งและเย็น หลีกเลี่ยงแสงแดดและความร้อนโดยตรง
- หากแบตเตอรี่บวมหรือมีร่องรอยความเสียหาย ให้หยุดใช้งานทันทีและทิ้งอย่างถูกวิธี
การแก้ไขปัญหา
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| เฮลิคอปเตอร์ไม่ตอบสนองต่อการควบคุมระยะไกล | Not bound, low battery (helicopter or remote), power off. | Ensure both devices are powered on. Re-bind the helicopter and remote control. Charge helicopter battery. Replace remote control batteries. |
| เฮลิคอปเตอร์ลอยตัวขณะลอยอยู่กลางอากาศ | Uneven trim settings, slight wind, unbalanced blades. | Adjust trim controls on the remote control. Operate in a calm environment. Check blades for damage and replace if necessary. |
| เฮลิคอปเตอร์ไม่ขึ้นบิน | Low helicopter battery, damaged blades, throttle not advanced enough. | Charge helicopter battery. Check and replace damaged blades. Slowly increase throttle. |
| เวลาบินสั้น | แบตเตอรี่ชาร์จไม่เต็ม แบตเตอรี่เสื่อมสภาพ | Ensure battery is fully charged. Consider replacing the battery if it's old or damaged. |
ข้อมูลจำเพาะ
- หมายเลขรุ่น: 150 อีซี
- ผู้ผลิต: เอสกี้
- ระบบควบคุม: Gyroscope แกนหมุน 6
- คุณสมบัติ: Height Hold, Hover, One-button Shutdown
- แบตเตอรี่เฮลิคอปเตอร์: 1S 3.7V 150mAh Li-Po (included)
- รีโมทคอนโทรล: MINI 6X 6-Channel 2.4GHz Transmitter
- อายุที่แนะนำ: 14 ปีขึ้นไป
- น้ำหนักสินค้า: น้ำหนักประมาณ 1.05 ปอนด์ (รวมบรรจุภัณฑ์)
- ขนาดแพ็คเกจ: 8.3 x 7.1 x 3.8 นิ้ว

Image: ESKY 150 EC Helicopter dimensions.
แนวทางปฏิบัติเพื่อความปลอดภัย
Please read and adhere to these safety guidelines to prevent injury or damage.
- ควรใช้งานเฮลิคอปเตอร์ในพื้นที่โล่งเสมอ ห่างจากผู้คน สัตว์เลี้ยง และสิ่งกีดขวาง
- ห้ามบินใกล้สายไฟฟ้า ถนน หรือแหล่งน้ำ
- Keep fingers and loose clothing away from rotating blades.
- Never fly in strong winds or adverse weather conditions.
- Adult supervision is recommended for users under the age of 14.
- Do not attempt to modify the helicopter or its components.
- ปิดเฮลิคอปเตอร์และรีโมทคอนโทรลเมื่อไม่ใช้งาน
การรับประกันและการสนับสนุน
Information regarding product warranty and customer support contact details is not available in the provided product data. Please refer to the product packaging or the seller's webดูรายละเอียดเงื่อนไขการรับประกันและตัวเลือกการสนับสนุนเพิ่มเติมได้ที่เว็บไซต์นี้
วิดีโอผลิตภัณฑ์อย่างเป็นทางการ
No official product videos from the seller were provided in the product data.