sloHEXtted H208 Industrial Wireless Crane Remote Control User Manual

1. สินค้าหมดview

The sloHEXtted H208 is an industrial-grade wireless remote control system designed for various lifting and material handling applications, including overhead cranes, bridge cranes, chain hoists, monorails, concrete pump trucks, and mobile lifting equipment. This system provides reliable and safe operation with a robust design and user-friendly features.

This manual specifically covers the 1 Transmitter + 1 Receiver, 12-65V DC model.

Image 1.1: sloHEXtted H208 Industrial Wireless Crane Remote Control System, showing the transmitter, receiver, and included gloves.

คุณสมบัติหลัก:

• Dual Speed 8-Channel Control: Provides precise control over crane movements with 8 momentary buttons, configurable via USB programming cable (sold separately).
• ช่วงควบคุมที่ขยายกว้างขึ้น: Operates up to 100 meters (328 feet) with 360-degree barrier-free signal penetration.
• เพิ่มความปลอดภัย: Equipped with an EU standard Emergency Stop button and quality circuit boards for reliable operation.
• โครงสร้างทนทาน: IP65 rated for dust and water resistance, featuring a fiberglass-reinforced nylon shell and robust silicone-wrapped buttons.
• การออกแบบที่เป็นมิตรต่อผู้ใช้: Ergonomic transmitter for comfortable handling, with clear LED indicators for status and troubleshooting.
• ติดตั้งง่าย: Includes Y-type fork terminals, reserved brass mounting holes, and cheese head slotted screws for convenient setup.

2. ข้อมูลด้านความปลอดภัย

Read and understand all safety instructions before operating the sloHEXtted H208 remote control system. Failure to follow these instructions may result in serious injury or equipment damage.

ข้อควรระวังเพื่อความปลอดภัยทั่วไป:

• Always ensure the Emergency Stop button is accessible and functional. Pressing this button will immediately halt all controlled movements.
• Do not operate the system if the transmitter or receiver appears damaged.
• Ensure the power supply to the receiver matches the specified voltage (12-65V DC for this model).
• Keep the transmitter dry and clean. Although IP65 rated, prolonged exposure to extreme conditions should be avoided.
• Only qualified personnel should install, maintain, or repair the system.
• Before operation, verify that the remote control functions correspond correctly to the crane's movements.
• Never leave the transmitter unattended in an area where unauthorized personnel could access it.

Image 2.1: Close-up of the Emergency Stop button on the transmitter, designed for immediate cessation of operations.

3. การตั้งค่าและการติดตั้ง

This section outlines the steps for installing and preparing your sloHEXtted H208 remote control system.

3.1 การแกะบรรจุภัณฑ์และการตรวจสอบ

Upon receiving your product, carefully unpack all components and inspect them for any signs of damage. The package should contain:

• เครื่องส่งสัญญาณ 1 ตัว
• 1 x ตัวรับสัญญาณ
• 1 x Button Sticker Sheet
• 1 x Transmitter Cover
• Fasteners (bolts, nuts, washers, spring)
• คู่มือการใช้งาน (เอกสารนี้)

ภาพที่ 3.1: จบแล้วview of package contents, including the transmitter, receiver, and accessories, with dimensions.

3.2 Receiver Mounting

1. Select a suitable location for the receiver, ensuring it is protected from excessive vibration and physical impact, yet accessible for wiring.
2. Utilize the reserved brass mounting holes on the back of the receiver for secure attachment.
3. Use the provided fasteners (bolts, nuts, washers, and spring) to mount the receiver firmly. The spring is designed to absorb vibrations.

Image 3.2: Details of the receiver's mounting features, including Y-type fork terminals, reserved brass mounting holes, and cheese head slotted screw.

3.3 การต่อสายเครื่องรับสัญญาณ

Refer to the wiring diagram provided on the receiver unit and in the included documentation. Ensure all connections are secure and correctly matched to your crane's control system.

• Connect the power supply (12-65V DC) to the designated power terminals on the receiver.
• Connect the control output wires from the receiver to the corresponding inputs of the crane's control panel. The system uses Y-type fork terminals for easy connection.
• ตรวจสอบให้แน่ใจว่ามีการต่อสายดินอย่างถูกต้องตามกฎหมายไฟฟ้าท้องถิ่น

Warning: Incorrect wiring can cause severe damage to the system or the crane. If unsure, consult a qualified electrician.

3.4 การติดตั้งแบตเตอรี่เครื่องส่งสัญญาณ

The transmitter requires batteries (not included). Open the battery compartment, insert the batteries according to the polarity markings, and close the compartment securely.

3.5 Pairing and Reprogramming

The transmitter and receiver are typically pre-paired from the factory. If re-pairing is necessary or if you wish to reprogram button functions, a USB programming cable (not included, sold separately) is required. Refer to the separate programming guide for detailed instructions.

Image 3.3: Button sticker sheet for customizing button labels on the transmitter to match specific crane functions.

4. คู่มือการใช้งาน

This section details the operation of the sloHEXtted H208 wireless remote control.

4.1 เค้าโครงเครื่องส่งสัญญาณ

Image 4.1: Annotated view of the transmitter, highlighting the Emergency Stop button, LED indicators (Low Battery, Error, Status), and silicone control buttons.

• Emergency Stop Push Button: Red button at the top. Press to immediately stop all operations. Twist to reset.
• LED 1 (Low Battery): บ่งชี้สถานะแบตเตอรี่ต่ำ
• LED 2 (Error): Indicates system error.
• ไฟ LED แสดงสถานะ: Provides operational status feedback.
• ปุ่มซิลิโคน: Eight momentary buttons for controlling crane movements (e.g., Up, Down, Left, Right, Forward, Backward, Speed 1, Speed 2).
• ON/HORN (START) Button: Green button at the bottom to activate the transmitter and potentially trigger a horn function.

4.2 การเริ่มดำเนินการ

1. Ensure the receiver is powered on and correctly wired to the crane.
2. Verify the Emergency Stop button on the transmitter is in the released (unpressed) position.
3. กดสีเขียว เริ่ม button on the transmitter to activate it. The Status LED should illuminate, indicating it is active.
4. Confirm that the crane responds correctly to the transmitter's commands before commencing full operation.

4.3 Controlling Crane Movements

Use the silicone buttons to control the crane's functions. The buttons are momentary, meaning the function is active only while the button is pressed.

• ปุ่มทิศทาง: Typically control Up, Down, Left, Right, Forward, and Backward movements.
• Speed Buttons (1 & 2): These buttons provide dual-speed control. Pressing '1' might activate slow speed, and '2' might activate fast speed, or they might be used in combination with directional buttons for speed control. Refer to your specific crane's configuration.

The control range is up to 100 meters (328 feet) with 360-degree coverage, allowing flexible operation without direct line of sight.

Image 4.2: Illustration of the 100-meter (328 feet) control range and 360-degree operation capability of the remote control system.

4.4 Emergency Stop Procedure

In case of an emergency or unexpected movement, immediately press the red หยุดฉุกเฉิน button on the top of the transmitter. This will cut power to the control outputs, stopping all crane functions.

5. การบำรุงรักษา

Regular maintenance ensures the longevity and reliable operation of your sloHEXtted H208 remote control system.

5.1 การทำความสะอาด

• Wipe the transmitter and receiver with a soft, damp ผ้า ห้ามใช้สารทำความสะอาดที่มีฤทธิ์กัดกร่อนหรือตัวทำละลาย
• Ensure no dust or debris accumulates around the buttons or the Emergency Stop mechanism.

5.2 การเปลี่ยนแบตเตอรี่

When the Low Battery LED (LED 1) on the transmitter illuminates, replace the batteries promptly to avoid interruption of service. Use only recommended battery types.

5.3 การตรวจสอบ

• Periodically inspect the transmitter and receiver for any physical damage, cracks, or loose components.
• Check all wiring connections to the receiver for tightness and corrosion.
• Verify the functionality of the Emergency Stop button before each use.

6 การแก้ไขปัญหา

This section provides solutions to common issues you might encounter with your sloHEXtted H208 remote control system.

The transmitter and receiver are equipped with LED signals to assist in troubleshooting. Observe these indicators for initial diagnosis.

Image 6.1: LED indicators on both the transmitter and receiver provide visual cues for system status and error conditions, aiding in troubleshooting.

7. ข้อมูลจำเพาะ

8. การรับประกันและการสนับสนุน

For warranty information, technical support, or service inquiries, please contact sloHEXtted customer service through the retailer where the product was purchased or visit the official sloHEXtted website. Please have your product model number (H208) and purchase date available when contacting support.

ผู้ผลิต: sloHEXtted

แบบอย่าง: H208

ASIN: B0C2H192KJ